• 전기학회논문지
• /
• 제57권8호
• /
• pp.1383-1391
• /
• 2008

This paper presents an implementation of vector control for SPMSM using model based controller design in MATLAB/SIMULINK. The model based controller design enables fast development of control system for motor by designing controllers and performing simulation on the GUI (Graphic User Interface) platform, converting program code directly into real-time programs, and then performing tests for the responses from controllers. The controllers designed in this paper are PI speed controller and decoupling PI current controller. Also space vector modulation method using offset voltage is used in PWM scheme. And system stability is also secured by close magnitude overmodulation method, maintaining dynamics of load when overmodulation occurs. The validity of vector control implemented is verified through simulations and experiments.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.576-585
• /
• 2016

The current control methods of Y-connected 7 Phase BLDC motor are sine wave current control and square wave control. The sine wave current control method needs dq axis transformation of $7{\times}7$ matrix for current control and very complex. Also this method is not suitable for multi Phase BLDC motor of trapezoidal back emf wave. Therefore, in Y connected multi phase BLDC motor, the square wave current control methods are required. Generally, in the 3Phase BLDC system, Average current control method is used for current control. The average current is obtained that the summation of absolute value of each phase current magnitude is divided by the number of conduction phase. However, if average current control method is applied to multi-phase system, there is a problem that each phase currents are different. This problem affects unbalance of each phase torque and fluctuation of total torque. This paper proposed each phase current control method of Y connected 7Phase BLDC system. Proposed method is used for PI controller of each phase for each phase current control. This method can perfect square wave current control. Also, configuration of the method is easier than DQ axis transformation. Proposed method is verified through simulation and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.637-640
• /
• 1991

In this paper deals with linearized control of induction motor by vector control. Output equation induced from d-q axies voltage and current equation of induction moter. The condition of induced equation is that rotor's current of axies has 0 and state current of D axies which was driven by synchronous speed is constant. The fully digital controlled induction motor drive system based on the proposed linearized method and the control circuit of system consists of 16bits micro computer and all the function are implemented with software. When the voltage source inverter control with PI controller is empolyed, in spite of secondary resistance Rr Variation, the Vector control condition is satisfied.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권3호
• /
• pp.397-403
• /
• 2012

This paper describes a control method of turn-on/off angles to improve the efficiency of the switched reluctance generator(SRG) with a power closed-loop control system, and the inner-loop of the system is current hysteresis control. The SRG control system is constituted by the PI power controller and the two-level current hysteresis controller. By measuring and analyzing the system losses of different reference powers, speeds and turn-on/off angles, selection strategy of optimal turn-on/off angles is discussed. The proposed method is simple, reliable, and easy to achieve.

• 전력전자학회논문지
• /
• 제21권6호
• /
• pp.473-480
• /
• 2016

This study proposes a performance improvement for parallel-connected thyristor dual converters using a circulating current with an unbalanced parallel operation compensator. The proposed control method determines a variable reference value for the voltage PI controller according to voltage error at firing angle control applied to a difference current control. This method uses circulating current control to maintain a stable voltage and excellent current response during parallel operation. The effectiveness of the proposed control is verified with a simulation and an experiment based on the comparison of the performance of the proposed control method with other conventional methods.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.190-204
• /
• 2016

An active front end (AFE) is required for a three-phase induction motor (IM) fed by a voltage source inverter (VSI), because of the increasing need to derive quality current from the utility end without sacrificing the power factor (PF). This study investigates a proportional-plus-integral (PI) controller based AFE topology that uses a super-lift converter (SLC). The significance of the proposed SLC, which converts rectified AC supply to geometrically proceed ripple-free DC supply, is explained. Variations in several power quality parameters in the intended IM drive for 0% and 100% loading conditions are demonstrated. A simulation is conducted by using MATLAB/Simulink software, and a prototype is built with a field programmable gate array (FPGA) Spartan-6 processor. Simulation results are correlated with the experimental results obtained from a 0.5 HP IM drive prototype with speed feedback and a voltage/frequency (V/f) control strategy. The proposed AFE topology using SLC is suitable for three-phase IM drives, considering the supply end PF, the DC-link voltage and current, the total harmonic distortion (THD) in supply current, and the speed response of IM.

• 한국전자통신학회논문지
• /
• 제16권5호
• /
• pp.835-844
• /
• 2021

본 논문에서는 스마트 그리드 전력설비 간 통신을 통해 고장구간을 자율적으로 판단, 분리하기 위한 기반기술인 통신제어장치를 설계하였다. 통신제어장치에서 제어모듈은 3상 전압, 전류를 계측할 수 있도록 DSP, 통신모듈은 전력설비 간 통신을 통해 고장구간을 판단, 고장구간 분리를 실현할 수 있도록 라즈베리 파이로 설계되었다. DSP와 라즈베리 간 통신은 SPI 통신방식을 기반으로, 반면에 라즈베리 간 통신은 Wi-Fi 기반으로 설계되었다. 끝으로, 3개의 전력설비 통신제어 장치로 구성되는 성능 평가 시스템을 구축하였으며, 선로 상의 다양한 고장 이벤트들에 대한 모의 검증을 실시하였다. 평가 결과, 모든 시험경우들에 대해서 통신제어장치가 요구된 응답을 보임으로서 통신제어장치 설계 방법론의 유효성을 확인할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권5호
• /
• pp.548-574
• /
• 2009

Personal information (hereinafter referred to as "PI") infringement has recently emerged as a serious social problem in Korea. PI infringement in the public and private sector is common. There were 182,666 cases of PI in 2,624 public organizations during the last three years. Online infringement cases have increased. PI leakage causes moral and economic damage and is an impediment to public confidence in public organizations seeking to manage e-government and maintain open and aboveboard administration. Thus, it is an important matter. Most cases of PI leakage result from unsatisfactory management of security, errors in home page design and insufficient system protection management. Protection management, such as encryption or management of access logs should be reinforced urgently. However, it is difficult to comprehend the scope of practical technology management satisfied legislation and regulations. Substantial protective countermeasures, such as access control, certification, log management and encryption need to be established. It is hard to deal with the massive leakage of PI and its security management. Therefore, in this study, we analyzed the conditions for the technical protection measures during the processing phase of PI. In addition, we classified the standard control items of protective measures suited to public circumstances. Therefore, this study provides a standard and checklist by which staff in public organizations can protect PI via technical management activities appropriate to laws and ordinances. In addition, this can lead to more detailed and clearer instructions on how to carry out technical protection measures and to evaluate the current status.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1392-1395
• /
• 1996

Nonlinear PID controllers have increasingly used in current industrial practice because it is robust and is easy to operate. Little guideline and tuning method, however, has been recommended for the nonlinear PID controllers while a lot of result is available for the linear PID controllers. Application guideline and tuning formulae are presented for error square type nonlinear controllers, which are most popular currently, are presented.

• Journal of Electrical Engineering and information Science
• /
• 제1권2호
• /
• pp.101-108
• /
• 1996

A new speed controller based on the fuzzy algorithm with hierarchical structure is presented. The input variables of the controller are speed error and its derivative(change of error), where the output variable is the change of torque current command. Several comparisons were performed with conventional PI (proportional plus integral) controller and proposed controller. These controllers are applied to the laboratory model drive system with 2.2kW induction motor. Some simulation and experimental results show that the speed controller using fuzzy algorithm is more robust than the conventional PI controller.