• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.873-880
• /
• 2008

When checking the state of deterioration or damage structures, regular visual inspection has very important role. At this point, a visual inspection is performed mainly by sketch or photography with a camera of inspectors. If that happens, it takes a lot of effort and time to inspect appearance damages. The purpose of this study is to develop the automatic recognition system for a more efficient and effective inspection of appearance damages. In the process, the image processing technology and the data management & analysis system for damage recognition are mainly developed and applied. This automatic recognition system enables inspectors or clients to obtain correct data that can recognize a damage, such as, crack, water leakage, efflorescence, delamination (peeling), spalling, etc. In addition, this study takes aim at the effect of secure safety, functional maintenance and extension of design lifetime according to build up continuous and systematic data management system.

• Restorative Dentistry and Endodontics
• /
• v.49 no.1
• /
• pp.7.1-7.11
• /
• 2024

Objectives: This study aimed to evaluate the impact of substrate color and interface distance on the color adjustment of 2 single-shade composites, Vittra APS Unique and Charisma Diamond One. Materials and Methods: Dual disc-shaped specimens were created using Vittra APS Unique or Charisma Diamond One as the center composite, surrounded by shaded composites (A1 or A3). Color measurements were taken with a spectrophotometer against a gray background, recording the color coordinates in the CIELAB color space. Illumination with a light-correcting device and image acquisition using a polarizing filter-equipped cell phone were performed on specimens over the same background. Image processing software was used to measure the color coordinates in the center and periphery of the inner composite and in the outer composite. The color data were then converted to CIELAB coordinates and adjusted using data from the spectrophotometer. Color differences (ΔE₀₀) between the center/periphery of single-shade and outer composites were calculated, along with color changes in single-shade composites caused by different outer composites. Color differences for the inner composites surrounded by A1 and A3 were also calculated. Data were analyzed using repeated-measures analysis of variance (α = 0.05). Results: The results showed that color discrepancies were lowest near the interface and when the outer composite was whiter (A1). Additionally, Charisma Diamond One exhibited better color adjustment ability than Vittra APS Unique. Conclusions: Color discrepancies between the investigated single-shade composites diminished towards the interface with the surrounding composite, particularly when the latter exhibited a lighter shade.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.7-15
• /
• 1993

In order to generate database, we need to obtain speedy and corret topographic information according to requisite purpose. Generally methods to an acquisition of topographic information are available by the use of maps, satellite images, stereo models of aerophoto and so forth. But we must choose a optimal method in consideration of area of object region, spatial solution of image, required accuracy and economic. Therefore, this study aims at providing the establish method of efficient topographic data base of small object region by means of spatial layer techniques of geo-spatial information system and using acquisition of geo-information and production method of base map with photoballoon system to obtain topographic information for reasonable plan and design of object region which select a zone preparation of a collective village with small region. As a result of this study, we decided an f-stop and a shutter speed of camera to obtain accurate stereo model and were able to obtain stereo photography and topography for small region by using of photoballoon system through accuracy analysis according to change flight height and air base speedly and economically. We can establish the data base useable to efficient plan and design as existence map with overlay plan drawing.

• Korean Journal of Cleft Lip And Palate
• /
• v.6 no.2
• /
• pp.91-105
• /
• 2003

There are significant limitations in the precision of mandibular distraction in setting a desired occlusal and facial esthetic outcome. The purpose of this study is to present the simulation method for the distraction osteogenesis treatment planning. 3-D surgery simulation software programs V-works and V-Surgery(Cybermed, Seoul, Korea) were used from the 3D CT data in addition to the conventional data facial photography, panorama and cephalogram, dental cast model. We have utilized already for the various surgical procedures to get information preoperatively for the maxillofacial surgery like cancer localization and reconstructive surgery, orthognathic surgery and implant surgery in the department of Oral and Maxillofacial surgery, Seoul National University Hospital. On the software, bone cutting can be done at any place and any direction. Separated bone segment can be mobilized in all 3 dimensional direction. After the 3D simulation on the software program, mock surgery on the RP model can be performed. This planning method was applied to two hemifacial microsomia patients. With this protocol, we could simulate the movement of bony segment after maxillofacial distraction osteogenesis

• Journal of the Korean Home Economics Association
• /
• v.30 no.3
• /
• pp.1-13
• /
• 1992

The purpose of this study was (1) to classify the lower body of young women, (2) to investigate the three-dimensional characteristics of each lower body type. The subjects for direct anthrophometric measurements were 330 female college students aged from 18 to 25. Thirty variables(16 directly obtained from the anthropometric data and 14 indices) were used for lower body classification. The data were statintically analyzed by the principal factor analysis and the cluster analysis. Factors extracted were used as variables for the cluster analysis. To detect three-dimensional characteristics of each lower body type, horizontally sectioned overlap maps were obtained by the moire photography. The results obtained from this study were as follows: The lower body of Korean young women into five groups according to their lower body shapes. 1) Group 1(18.9% of the total) is characterized by a shorter and thinner lower body, no dropped hip with a close size between hip and waist. 2) Group 2(21.3% of the total) is characterized by longer lower body and average dropped hip with the most differences between hip and waist size. 3) Group 3(18.6% of the total) is characterized by their average hip and waist sizes but with the most dropped hip. 4) Group 4(22.9% of the total) is characterized by their comparatively fat lower body, almost average dropped hip and more differences between hip and waist size. 5) Group 5(19.2% of total) is characterized by the fattest and relatively longer lower body, least dropped hip with less differences between hip and waist sizes.

• Fashion & Textile Research Journal
• /
• v.22 no.4
• /
• pp.504-514
• /
• 2020

This study improves the dimensional suitability of nail tip products by reviewing the type of fingernail as seen among adult women in Korea. Subjects were 147 adult women ranging from age 20 to 40. Direct fingernails measurements were made using digital Vernier calipers and a curvature gauge. Data on various fingernail shapes were collected through indirect measurements using photography to reveal the shape characteristics of each fingernail types. In this sense, data were analyzed by statistical methods with the use of factor analysis. There were various factors considered to classify extracted fingernail types such as five factors (for the thumb), four factors (index, middle, and little fingers), and three factors (for the ring finger). The cluster analysis resulted in three types. Type 1 is a 'Square' shape characterized with wide fingernails, low height, flat, and low curvature of the cuticle line. Type 2 is 'U-round' shape characterized with narrow fingernails, high height, convex, and the highest curvature of the cuticle line. Type 3 is a 'Round' shape in which the fingernails are wide, high in height, convex, and characterized with a medium curvature of the cuticle line. The results are useful for companies that develop the free edge shape of fingernails for consumer products. The measured values of fingernail can be applied to the shape and lake setting of the nail tip product, depending on type of fingernail.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.3
• /
• pp.221-228
• /
• 2016

In this paper, we introduce our simulation software for EEG signal accuracy improvement. Users can check and train own EEG signal accuracy using our simulation software. Subjects were shown emotional imagination condition with landscape photography and logical imagination condition with a mathematical problem to subject. We use that EEG signal data, and apply Independent Component Analysis algorithm for noise removal. So we can have beta waves(${\beta}$, 14-30Hz) data through Band Pass Filter. We extract feature using Root Mean Square algorithm and That features are classified through Support Vector Machine. The classification result is 78.21% before EEG signal accuracy improvement training. but after successive training, the result is 91.67%. So user can improve own EEG signal accuracy using our simulation software. And we are expecting efficient use of BCI system based EEG signal.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.1-11
• /
• 2002

This study set up a purpose in the efficient utilization of security target objects. This purpose is the following: Firstly, this study analyzed problem about deleted areas for security described on aerial photography image. Secondly, this study made clustering and labeling to recognize censored areas of image. Finally, this study tried to maximize various utilizability of digital image data through postprocessing algorithm. Based on these courses, the results of this study appeared that brightness value of image increased depending on topography and quantities of topographic features. It was estimated that these was able to utilized by useful estimative data in judging information of topography and topographic features included in the total image. Besides, in the image recognition and postprocessing, the better result value was not elicited than in a mountainous region. Because it was included that a lots of topography and topographic features was similarly recognized with the process for deletion of the existing security target objects in urban and suburb region. This result appeared that the topography and quantities of topographic features absolutely affected the recognition and processing of image.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.123-135
• /
• 2014

Earthquakes can cause serious loss of life and significant property damage. Thus, the study of active faults is important in evaluating future fault activity and hazards caused by future earthquake events. Structural mapping and the tracing of active faults are the primary steps in studies of active faults. Until now, active faults in South Korea have been mapped using aerial photography, satellite images, and low-quality DEMs. Lineament analysis as a means of identifying active faults is relatively difficult in Korea due to geological characteristics (weak tectonic activity) and dense vegetation cover. In this paper, we introduce the basic concept of the LiDAR technique (a new prospective remote sensing method) and a data analysis method that can overcome these problems. This paper will contribute to a better understanding of the airborne LiDAR technique and its application to South Korea. Some preliminary results from Korean and USA LiDAR data show the usefulness of this technique for tracing lineaments, active faults, and terraces in South Korea.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.1-10
• /
• 2014

Recently, the value and the status of the digital archives that are built individually in the crossroads of oblivion and memory are due to big data has attracted attention globally is confusing. Video data that contains the cultural memory of the digital archive, such as culture, art, life, society, and social conditions of the time, it is a cultural heritage of national common expressed. Also, it remains a trace of history from the various media just like magazines, books, painting, photography, and film. Digital archive system is one of the best research results of media convergence and it has also a good opportunity to take full advantage of the new opportunities and cultural assets. The collection of infinite information of big data in perspective transient that exist at the same time compatibility of big data, it is trying to dismantle the cultural memory of us. It was asserted that must meet the criteria which can correspond to via the new digital era, will be applied to preserve the traditional media. The current image archive is necessary to accommodate proper two different directions.