• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.77-80
• /
• 2003

Switching Mode Power Supply(SMPS) is widely used in many industrial fields. Power factor improvement and harmonic reduction technique are very important in SMPS. In this paper, we propose the circuit applied Flying Capacitor Snubber for improving power factor of boost converter on fast switching state. Snubber circuit consists of a inductor, two diodes and a capacitor. The losses of switching are reduced by inserting a snubber inductor in the series path of the boost switch and the rectifier diode to control the di/dt rate of the rectifier during it's turn-off. Prior to actual experiment, the circuit analysis Is implemented by PSPICE simulation.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1442-1447
• /
• 2012

In this paper, direct power control system for three-phase PWM AC/DC converter without the source voltage sensors is proposed. The sinusoidal input current and unity effective power factor are realised based on the estimated flux in the observer. Both active and reactive power calculated using estimated flux. The estimation of flux is performed based on the Reduced-order flux observer using the actual currents and the command control voltage. The source voltage sensors are replaced by a flux estimator. The active and reactive powers estimation are performed based on the estimated flux and Phase anble. The proposed algorithm is verified through simulation and experiment.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.106-110
• /
• 2005

In this paper, LED traffic signal lamp's operating circuit using Flyback converter and PFC IC has been presented. Most power conversion circuits use PFC IC for Power Factor Correction. The design parameter's value of Flyback converter has been proposed and the error amplifier which regulates the output voltage has been designed Besides, the under voltage protection circuit and the over voltage protection circuit for protecting the operating circuit kin unbalance of common electric power source and the temperature compensation circuit for fixed optical output power have been proposed.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1090-1094
• /
• 2013

In this paper, a method to cope with short-term interruption is proposed. The proposed method uses a capacitor bank consisting of supercapacitors. A supercapacitor is a good means for energy storage for short-term usage. The proposed circuit is simple and accordingly easy to construct and to control. A prototype of 360 W single-phase PFC ac-dc converter is constructed and experimental results are presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.231-233
• /
• 2008

본 논문은 전류경계영역(Boundary Conduction Mode:BCM) 역률개선(Power Factor Correction:PFC) 플라이백 Converter의 전류 대신호 모델을 제시하였다. 역률개선 플라이백 Converter의 Small Signal Model을 확립하였으며, 60W급 전원회로의 구현을 통해 제안된 모델링의 유용성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.34-38
• /
• 2006

A low cost PDP sustain power supply is proposed based on flyback topology. By using Boundary Conduction Method(BCM) to control input current regulation, DCM condition can be met under all load conditions. Another feature of the proposed method is that a excessive voltage stress due to the link voltage increase can be suppressed by removing link capacitor and suggest new 'Level-shifting switch driver'. this new gate driver is improved 66% of efficiency than switching loss of a existed push-pull amplifier. The proposed converter is tested with a 400W(200V-2A output) prototype circuit.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.62-67
• /
• 1998

An arc welding machine using single switched PFC converter is presented in this paper. First, the basic operation and principle is reviewed. Controller design is intended to force voltage ripple to minimize, and dynamic response to enhance, Feed-forward strategy for arc welding machine is developed, and that is verified by simulation. The improved power factor characteristics of arc welding machine known as low power factor system with nonlinear property, are shown and evaluated compared to conventional one.

• 전력전자학회논문지
• /
• 제23권1호
• /
• pp.59-65
• /
• 2018

A new single-stage flyback power converter with PFC for electrolytic capacitor-less LED driver is proposed in this study. This method minimizes the peak-to-average ratio of the LED driving pulsating current by adding the LED driving current near the LED current valley area, as well as the third harmonic component injection into the input current. The reduced peak current value of the LED drive current minimizes the thermal stress of the LED itself, thereby increasing the reliability of the LED, as well as achieving a long lifetime. Simulation and experimental results show the usefulness of the proposed topology.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.327-334
• /
• 2011

Single-phase power factor correction (PFC) converter circuits are non-linear systems due to the contribution of their multiplier. This non-linearity causes difficulties in analysis and design. Models that reduce the system to a linear system involve considerable approximation, and produce results that are susceptible to instability problems. In this paper a piecewise affine (PWA) system is introduced for describing the nonlinear averaged model. Then robust output feedback controllers are established in terms of the linear matrix inequality (LMI). Simulation and experiments results show the effectiveness of the proposed control method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.325-326
• /
• 2015

본 논문에서는 입력 직류링크 전해 캐패시터와 power factor correction(PFC) 회로 없이 고효율과 고역률을 갖는 단일 전력 변환 직렬 공진형 AC-DC 컨버터를 제안한다. 제안된 컨버터의 1차측은 절연형 single-ended primary-inductor converter(SEPIC) 컨버터와 스위치의 서지 전압을 최소화하고 영전압스위칭을 위한 능동 클램프 회로로 구성되어 있다. 2차측은 큰전압 이득을 위한 배전압 회로로 구성되어 있으며 직렬 공진을 이용하여 다이오드의 영전류 스위칭을 달성함으로써 역방향 회복 문제를 해결 할 수 있다. 또한 별도의 PFC 회로와 입력 직류링크 전해 캐패시터 없이 제안된 역률개선 제어 알고리즘을 이용하여 간단한 구조로 고역률을 달성할 수 있다. 본 논문에서는 제안된 회로의 이론적 해석 및 시작품의 실험을 수행하여 타당성을 검증하였다.