• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.163-169
• /
• 2017

Although the strength of polyethylene terephthalate (PET) fibers which are generally used to make plastic bottles is low, the deformability of PET fibers is substantially high. Due to these material characteristics, a PET fiber can be used as a reliable strengthening material to resist a large deformation caused by earthquake and research pertinent to application of PET fibers is actively conducted in Japan. Therefore, in this study, experiments have been carried out to investigate the lateral confinement effect of PET fibers and to assess the applicability of PET fibers to construction fields by comparing the strengthening effect of PET fibers to that of carbon and glass fiber sheets. For this purpose, concrete cylinder specimens with parameters of different concrete strength and strengthening layers of carbon fiber sheets, glass fiber sheets, and PET fibers were respectively tested using two sets of cylinders for each parameter. As a result, specimens strengthened with carbon fiber sheets and glass fiber sheets failed due to sudden decrease of strength as with existing studies. However, specimens with PET fibers reached their maximum strength and then failed after gradual decrease strength without failure of PET fibers. In addition, although the strength of specimens with PET fibers did not significantly increase in comparison with that of specimens with carbon fiber sheets and glass fiber sheets, specimens with PET fibers indicated considerable deformability. Thus, a PET fiber can be considered as an effective strengthening material.

• Textile Coloration and Finishing
• /
• v.32 no.4
• /
• pp.208-216
• /
• 2020

In this study, C.I. Disperse Red 60 (DR60), C.I. Disperse Yellow 54 (DY54) dyes were used to investigate the washing fastness characteristics of PET fibers according to supercritical CO2 and aqueous dyeing process. The changes in K/S values and L⁎ values before and after washing of dyed PET fibers were observed according to the KS K ISO 105 washing fastness measurement method. In addition, it was confirmed by changing the ΔE⁎ and ΔL⁎ values of control PET fibers. Overall, it was confirmed that both the supercritical CO2 and aqueous dyeing process had excellent washing fastness ratings of 4-5 for DR60 and DY54 dyes. Comparatively, the K/S and L⁎ values for before and after washing of PET fibers with supercritical CO2 dyeing process was higher than that of the aqueous dyeing process and the ΔE⁎ and ΔL⁎ values of the control PET fibers were low. From the results, we observed that the supercritical CO2 dyeing process of PET fibers has better washing fastness characteristics than the aqueous dyeing process.

• Carbon letters
• /
• v.14 no.4
• /
• pp.243-246
• /
• 2013

In this work, electroless Ni-plating on polyethylene terephthalate (PET) ultra-fine fibers surfaces was carried out to improve the electric conductivity of the fiber. The surface properties of PET ultra-fine fibers were characterized using scanning electron microscopy, X-ray diffraction, and contact angle analyses. The electric conductivity of the fibers was measured using a 4-point testing method. The experimental results revealed the presence of island-like nickel clusters on the PET ultra-fine fibers surfaces in the initial plating state, and the electric conductivity of the Ni-plated fibers was enhanced with increasing plating time and thickness of the Ni-layers on the PET ultra-fine fibers.

• Textile Coloration and Finishing
• /
• v.11 no.6
• /
• pp.1-6
• /
• 1999

The porosities of PET fibers were investigated using a nitrogen porosimeter according to oxygen plasma treatment and dyeing with a disperse dye, and they were discussed in terms of the change of internal micro-structure of the PET fiber. The total pore volume, surface area and average pore size of the plasma treated PET fibers increased expectably compared with the untreated sample. The PET fibers treated with oxygen plasma and then dyed with a disperse dye were increased significantly in the surface area and the total pore volume comparing with those of plasma treated only, but decreased in the average pore size. The increase of the surface area, after dyeing, of the plasma treated PET fibers was due to addition of the surface area of the dye itself to that of the PET fiber. The increase of the total pore volume of the plasma treated PET fibers by dyeing, which is the opposite result to the general idea that the pore volume of fibers would be reduced by occupation of dye molecules in the pores, could be explained by the free-volume model. This is that the amorphous region in the fiber expanded by occupation of dye molecules, and the marginal space surrounding dyes was generated as many smaller pores, and the decrease of the average pore size of the dyed sample also could be explained The decrease of the average pore size was caused by the splitting of a larger pore into smaller pores.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3A
• /
• pp.401-406
• /
• 2008

This study can be used to produce structurally efficient recycled PET fiber from used waste PET bottles and evaluated the bond performance of the three type of recycled PET fiber and cement matrix. Also, the flexural tests were performed on concrete reinforced using the three type of recycled PET fibers. The test results showed that the recycled PET fiber was significantly increased bond strength. The flexural test results are demonstrated that recycled PET fibers improved the flexural toughness of concrete. Based on the bond and flexural test results, the bond and flexural performance of embossed type recycled PET fibers were significantly better than those of the other shape fibers.

• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.147-154
• /
• 2019

In this study, poly(ethylene terephthalate)(PET) fibres dyed with Disperse Red 167 using supercritical $CO_2$ technology. The purpose of this study was to investigate relationship between PET fibers and supercritical $CO_2$ during dyeing. The effects of temperature, pressure, dyeing time and mass ratio between the dye and PET in the dyeing chamber were considered. Thermal and mechanical properties of the fibers were investigated. Tensile strength of dyed PET fibers decreased at higher temperature and pressure conditions. DSC and DMA results indicated that the Tg and Tm values decreased significantly when compared to the pure PET fibers. However, uniformly dyed PET fibers were typically observed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.177-180
• /
• 2008

SHCC shows the high energy tolerance capacity due to the interfacial bonding of the fibers to the cement matrix. For effective material design and application of SHCC, it is needed to investigate the damage process and micro-fracture mechanism of cement matrix reinforced with different types of fibers. The objective of this paper is to investigate the direct tensile response of cement composites reinforced with single and hybrid fibers using acoustic emission(AE) technique. In this study, the correlations between AE signal and result of the direct tensile response of SHCC. For these purposes, three kinds of fibers were used: PET1.5%, PET1.0+PE0.5%, PET1.0%+PVA0.5%. The result of the direct tensile response of SHCC, for the same volume fraction of fibers, ultimate strength of PET-PE specimen was 2.7 times higher than specimens with PET fibers. And from AE signal value, AE event numbers and cumulative energy were different according to kind of fiber because of the different material properties of reinforced fiber.

• Textile Coloration and Finishing
• /
• v.9 no.2
• /
• pp.17-24
• /
• 1997

PET/PHE blends were prepared by the mixing of poly(ethylene terephthalate) and poly(hydroxyether of bisphenol A) at melt state above PET melting temperature and modified PET fibers having less than 5 wt% of PHE were also prepared by the melt spinning of the PET/PHE blends. The PET/PHE blends were able to prepare by means of physical mixing concept, except the chemical interaction between hydroxyl groups of PHE and ester groups of PET. It has been revealed that the modified PET fibers have some hydrophilic properties such as low contact angle and easy-dyeable characters.

• Journal of Fashion Business
• /
• v.9 no.1
• /
• pp.57-66
• /
• 2005

In natural dyeing, a number of supplementary methods have been practiced since deep shades of the dyed fabrics are not developed satisfactorily. The methods include using the mordants effectively or subjecting the fabrics to reiterated dyeing processes. In this study, we obtained deep shades in the dyeing of fabrics using Rhusjara ica as the dyestuff and applied chitosan to the fabric specimens in order to diversify the colors. Silk fibers and PET(polyethylene terephthalate) fibers were pretreated using chitosan, and subsequently dyed using different types of mordants. As the mordanting agents, Al, Sn, and Fe were employed. Various shades have been resulted in since the interactions of the mordants are different toward the silk fibers and PET fibers. In this study, we investigated the effect of the chitosan treatment along with the change of the mordanting agents on the color change for the silk and PET fibers.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.389-399
• /
• 2002

Poly (ethylene terephthalate) (PET) fibers were modified by deep UV irradiation which was produced by a low pressure mercury lamp. FT-IR and XPS analyses were used to elucidate the surface chemical composition of PET fibers treated with UV. Relative $O_{1s}$ intensity increased considerably and it was found that oxygen was incorporated in the form of COO on the fiber surface. FT-IR and XPS analyses proved the existence of carboxylic groups on the surfaces and the adsorption test of cationic compound further supported these results. The concentration of carboxylic acid group on the surface increased remarkably with Increasing irradiation time. XPS analysis and adsorption experiments proved that the surface structure of the UV-irradiated PET fibers were stable for 12 months. Antibacterial property and the deodorization rate of UV-irradiated PET fibers adsorbed with the berberine compound were investigated. Reduction rates of bacteria increased by about 21 to 99% compared to unradiated PET fiber. Deodorization rates of 23% for unradiated PET fiber increased to about 75% for 30 min irradiated samples.s.