• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.1
• /
• pp.16-21
• /
• 2024

Using electrochromic devices (ECD), smart window films that can change the colors from tinted state into transparent state by applying an external voltage were manufactured. Polyethylene terephthalate (PET) film was used as a substrate instead of conventional glass, and ECD modules having a total thickness of about 50 ㎛ were manufactured by sequentially introducing an ITO/Ag/ITO electrode layer, a WO3/TIC2 organic discoloration layer, and a Nafion fluorine electrolyte layer. Through a series of sputtering, bar coating, and thermal compression processes, a large scale smart window with a horizontal and vertical length of more than 80 mm was manufactured. When DC 3.5 V was applied, the transmittance decreased from 54 % to 24 % and moreover the color change could be confirmed even with the naked eye. Reversible color change capability at low external voltage implies that external sunlight can be selectively blocked which is effective in terms of energy saving.

• Journal of Bio-Environment Control
• /
• v.15 no.1
• /
• pp.69-77
• /
• 2006

The experiment was conducted to investigate the nutrition absorption pattern in the growth stage and develope the optimal nutrient solution hydroponically grown the cherry tomato 'Koko' in closed substrate culture system with the nutrient solution of National Horticultural Research Station in Japan into 1/2S, 1S, and 2S. When plant was grown in 1/2S, the growth and yield were high and the pH and EC in the root zone were stable. Suitable composition of nutrient solution for cherry tomato was $NO_3-N\;6.8,\;PO_4-P\;2.7,\;K 3.2,\;Ca\;3.6\;and\;Mg\;1.1\;me\;L^{-1}$ in the early growth stage, $NO_3-N\;7.3,\;PO_4-P\;2.2,\;K\;3.7,\;Ca\;3.6;and\;Mg\;1.1\;me\;L^{-1}$ in the late growth stage by calculating a rate of nutrient and water uptake. To estimate the suitability for the nutrient solution in a development of cherry tomato developed by Wongkwang university in Korea (WU), plant was grown in perlite substrate supplied with different solution and strengths(S) by research station for greenhouse vegetable and floriculture in the Netherlands (Proefstation voor tuinbouw onder glas th Mssldwijk; PTG) of 1/2S, 1S, and 2S, respectively. The growth was good at the PTG and WU 2S in the early stage and the PTG of 1S and WU of 1S and 2S in the late stage. The highest yield of cherry tomato obtained in the WU of 2S. pH and EC in root zone of WU of 2S were stable during the early and late growth stage. Therefore when cherry tomato plant was grown in WU of 2S of EC $1.6{\sim}2.0\;dS\;m^{-1}$in the nutrient solution, not only stable growth and yield but also fertilizer reduction can be obtained than that of PTG.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.21-29
• /
• 2024

In the rapidly advancing information society, electronic devices, including smartphones and tablets, are increasingly digitized and equipped with high-performance features such as flexible displays. This study focused on optimizing the manufacturing process for Transparent Conductive Films (TCF) by using the cost-effective conductive polymer PEDOT and transparent substrate PET as alternatives to expensive materials in flexible display technology. The variables considered are production speed (m/min), coating maximum temperature (℃), and PEDOT supply speed (rpm), with surface resistivity (Ω/□) as the response parameter, using Response Surface Methodology (RSM). Optimization results indicate the ideal conditions for production: a speed of 22.16 m/min, coating temperature of 125.28℃, and PEDOT supply at 522.79 rpm. Statistical analysis validates the reliability of the results (F value: 18.37, P-value: < 0.0001, R²: 0.9430). Under optimal conditions, the predicted surface resistivity is 145.75 Ω/□, closely aligned with the experimental value of 142.97 Ω/□. Applying these findings to mass production processes is expected to enhance production yields and decrease defect rates compared to current practices. This research provides valuable insights for the advancement of flexible display manufacturing.

• Journal of Sensor Science and Technology
• /
• v.28 no.2
• /
• pp.106-112
• /
• 2019

Flexible impact force sensors composed of piezoelectric PZT/PDMS composite sandwiched between Al/PET films were fabricated and their voltage signal characteristics were evaluated under varying impact forces for electronic mitt applications. The piezoelectric impact force sensor on an ethylene-vinyl acetate (EVA) substrate exhibited an output voltage difference of no greater than 40 mV a periodical impact test in with the impact load was increased by as much as 240 N by a restoration time of 5 s in a five-time experiment, implying good sensing ability. Moreover, the impact force sensor embedded four electronic mitts showed a reliable sensitivity of less than 1 mV/N and good repeatability under 100 N-impact force during a cycle test executed 10,000 times. This indicated that the fabricated flexible piezoelectric impact sensor could be used in electronic mitt applications. However, the relatively low elastic limit of substrate material such as EVA or poly-urethane slightly deteriorated the sensitivity of the impact sensor embedded electronic mitt at over 200 N-impact forces.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.4
• /
• pp.280-290
• /
• 2007

Purpose: Gender differences in personality are considered to have biological bases. In an attempt to understand the gender differences of personality on neurobiological bases, we conducted correlation analyses between regional brain glucose metabolism and temperament factors of personality in males and females. Materials and Methods: Thirty-six healthy right-handed volunteers (18 males, 33.8$\pm$17.6 y; 18 females, 36.2$\pm$20.4 y) underwent FDG PET at resting state. Three temperament factors of personality (novelty seeking (NS), harm avoidance (HA), reward dependence (RD)) were assessed using Cloninger's 240-item Temperament and Character Inventory (TCD within 10 days of FOG PET scan. Correlation between regional glucose metabolism and each temperament factor was tested using SPM2. Results: In males, a significant negative correlation between NS score and glucose metabolism was observed in the bilateral superior temporal gyri, the hippocampus and the insula, while it was found in the bilateral middle frontal gyri, the right superior temporal gyrus and the left cingulate cortex and the putamen in females. A positive HA correlation was found in the right midbrain and the left cingulate gyrus in males, but in the bilateral basal ganglia in females. A negative RD correlation was observed in the right middle frontal and the left middle temporal gyri in males, while the correlation was found in the bilateral middle frontal gyri and the right basal ganglia and the superior temporal gyrus in females. Conclusion: These data demonstrate different cortical and subcortical metabolic correlates of temperament factors of personality between males and females. These results may help understand biological substrate of gender differences in personality and susceptibility to neuropsychiatric illnesses.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.379-382
• /
• 2004

In this paper we fabricated a test panel for AMOLED on glass and PET substrate. The test panel consisted of the various size of OTFTs and OLEDs and the current driving capability of OTFTs for OLEDs has been investigated. OTFTs were made of the inverted staggered structure and employed polyvinylphenol (PVP) as the gate insulator and pentacene thin film as the active layer. The OTFTs produced the filed effect mobility of $0.3 cm^2/V.sec$ and on/off current ratio of $10^5$. OLEDs consisted of TPD for HTL and Alq3 for EML with 35nm thick, generating green monochrome light. We found that OTFT with channel length of 70${\mu}m$ and channel width of over 3.5mm provided the sufficient current to OLED to generate the luminescence of $0.3Cd/m^2$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.389.2-389.2
• /
• 2016

The flexible solid state device has been widely studied as portable and wearable device applications such as display, sensor and curved circuits. A zero-bias operation without any external power consumption is a highly-demanding feature of semiconductor devices, including optical communication, environment monitoring and digital imaging applications. Moreover, the flexibility of device would give the degree of freedom of transparent electronics. Functional and transparent abrupt p/n junction device has been realized by combining of p-type NiO and n-type ZnO metal oxide semiconductors. The use of a plastic polyethylene terephthalate (PET) film substrate spontaneously allows the flexible feature of the devices. The functional design of p-NiO/n-ZnO metal oxide device provides a high rectifying ratio of 189 to ensure the quality junction quality. This all transparent metal oxide device can be operated without external power supply. The flexible p-NiO/n-ZnO device exhibit substantial photodetection performances of quick response time of $68{\mu}s$. We may suggest an efficient design scheme of flexible and functional metal oxide-based transparent electronics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.372.1-372.1
• /
• 2016

Recently, there are a lot of diseases all around the world. Out of them, Atherosclerosis (AS) is the most common cause of stroke, cardiovascular mortality, and myocardial infarction. The macrophage-derived foam cell, which is formed by oxidized low-density lipoprotein (oxLDL), is the crucial marker for AS. In this study, we report a label-free capacitance imaging technique with multi-electrode array (MEA). The lipid-rich aorta arch lesions, which are derived from an apolipoprotein-E receptor-deficient (apoE-/-) mouse, exhibit higher capacitance than the lipid-free aorta arch, allowing the capacitance imaging of lipid region in atherosclerosis. To improve the contacts between MEA and tissue, polypyrrole(PPy)-coated multi walled carbon nanotubes (MWNTs) multi electrode array (PPy-MWNTs-MEA) was fabricated. Compared to TiN-MEA, PPy-MWNTs-MEA yielded lower contact impedance and better capacitance images. In addition, we have also developed a flexible MEA using single walled carbon nanotubes on a PET substrate. The lipid region could be discriminated in the capacitance images of the lipid-rich aorta arch lesions measured using flexible MEA, demonstrating a feasibility of in vivo applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.88.1-88.1
• /
• 2015

In recent printed electronics technology, Photo-Sintering, a technique for sintering materials using a light source, has attracted attention as an alternative to time-consuming high-temperature thermal processes. The key principle of this technique is the selective heating of a strongly absorbent thin film, while preventing the heating of the transparent substrate by the light source. Many recent studies have used a flash lamp as the light source, and investigated the material-dependent effect of the width or intensity of the pulsed light. However, the flash lamp for sintering is not suitable for industry yet, because of needing too high power to sinter for a large scale. In energy-saving and large-scale sintering, LED technologies would be very useful in the near future. In this work, we investigated a sintering process for silver nanoparticles using UV-LED array. Silver nanoparticles in ink were inkjet-printed on a $1{\times}1cm$ area of a PET film and photo-sintered by 365 nm UV-LED module. A sheet resistance value as low as $72.6m{\Omega}/sq$ (2.3 - 4.5 times that of bulk silver) was obtained from the UV-LED sintering at 300 mW/cm2 for 50 min.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1034-1037
• /
• 2004

In this paper we fabricated a test panel for AMOLED on glass and PET substrate. The test panel consisted of the various size of OTFTs and OLEDs and the current driving capability of OTFTs for OLEDs has been investigated. OTFTs were made of the inverted staggered structure and employed polyvinylphenol (PVP) as the gate insulator and pentacene thin film as the active layer. The OTFTs produced the filed effect mobility of 0.3$cm^2$/V.sec and on/off current ratio of $10^5$. OLEDs consisted of TPD for HTL and Alq3 for EML with 35nm thick, generating green monochrome light. We found that OTFT with channel length of 70${\mu}m$and channel width of over 3.5mm provided the sufficient current to OLED to generate the luminescence of 0.3Cd/$m^2$.