• Preventive Nutrition and Food Science
• /
• 제14권4호
• /
• pp.349-353
• /
• 2009

The effects of packaging materials on preserving the functional component of pine bud beverage stored under UV (ultraviolet) light exposure conditions were studied. The order of UV light blocking properties of the selected packages was: opaque can> opaque PET (polyethylene terepthalate) with green lamination=transparent PET with 10% PEN (polyethylene naphthalate) blending> transparent PET, and did not depend on film thickness in specified range. At 20${^{\circ}C}$, the order of preserving degree of original color and endobornyl acetate, which is quality index of pine bud beverage, was the same as above. Exposure to UV light can cause of deterioration of functional food components, but green color lamination and blending of PEN materials with transparent PET help to preserve the UV sensitive pine bud beverage components. However, the treated PET bottles have poorer preservation capabilities than the opaque cans. Transparent PET with PEN blending, in particular, will be very useful packaging material for colorful functional beverage preservation by helping to protect the ingredients while attracting consumer attention.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1260-1261
• /
• 2008

Aluminium doped zinc oxide (ZnO:Al) thin film has emerged as one of the most promising transparent conducting electrode in flat panel displays(FPD) and in photovoltaic devices since it is inexpensive, mechanically stable, and highly resistant to deoxidation. In this paper ZnO:Al thin film was deposited on the polyethylene terephthalate(PET) substrate by the capacitively coupled r.f. magnetron sputtering method. Wide ranges of bias voltage, -30V${\sim}$45V, was applied to the growing films as an additional energy instead of substrate heating, and the effect of positive and negative bias on the film structure and electrical properties of ZnO:Al films was studied and discussed. The results showed that a bias applied to the substrate during sputtering contributed to the improvement of electrical properties of the film by attracting ions and electrons in the plasma to bombard the growing films. These bombardments provided additional energy to the growing ZnO film on the substrate, resulting in significant variations in film structure and electrical properties. The film deposited on the PET substrate at r. f. discharge power of 200 W showed the minimum resistivity of about $2.4{\times}10^{-3}{\Omega}-cm$ and a transmittance of about 87%.

• 한국식품과학회지
• /
• 제26권1호
• /
• pp.62-67
• /
• 1994

김치를 Ny/PE, Ny/CPP(PP tray+Ny/CPP cover), Cryovac BK-1, BK-4, PET/Al/PE film으로 포장하여 $5^{\circ}C$ (97%RH), $20^{\circ}C$ (76%RH)에서 저장 중 품질변화를 살펴보았다. 김치의 품질을 평가하기 위하여 포장내 가스조성, pH, 산도, 색도, 젖산균 수, 기호도를 기간별로 측정하였다. 포장내 가스조성은 PET/Al/PE film 포장김치가 저장초기에 산소농도가 높았고, 저장말기에 이산화탄소농도가 거의 100% 수준에 달하였다. Cryovac BK-1, BK-4로 포장된 김치는 발효가 진행되면서 이산화탄소농도가 증가하다가 가스투과성에 의한 이산화탄소의 방출과 외부공기의 유입으로 산소농도는 증가하고 이산화탄소농도는 감소하는 형태를 보였으며 저장말기까지 Ny/PE, Ny/CPP, PET/Al/PE와는 달리 포장의 팽배화 현상은 나타나지 않았다. pH 변화는 포장재질에 따른 차이가 크지 않았으나 Cryovac BK-1, BK-4가 저장중 다른 포장재질에 비하여 약간 낮은 pH를 나타냈으며, 산도는 약간 높았다. 저장중 김치의 색도변화가 포장재질에 따라 달랐으며, 포장재질별 젖산균수, 기호도 변화는 저장온도 모두에서 유의적인 차이가 없는것으로 나타났다. 이상의 결과를 종합하여 본 실험에 사용한 포장재질이 김치의 품질에 미치는 영향은 크게 다르지 않다고 여겨졌고, 저장 및 유통시 문제점인 팽배화현상을 방지하기 위해서는 현재 업체에서 사용하는 기체차단성이 높은 포장재보다는 상대적으로 이산화탄소의 투과도가 높은 포장재의 사용이 바람직하다고 사료된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.213-213
• /
• 2010

We investigated the RF sputtering conditions for the deposition of AZO (Al doped ZnO) transparent conducting film on PET using the roll to roll vacuum coater. AZO thin films, sputtered at the various RF powers and working pressures, were studied for their structural, electrical and optical properties.. From the X-Ray diffraction patterns, we calculated the lattice stress using the Bragg equation. The compressive stress tends to decrease with the increase in film thickness. AZO thin film with the thickness of 152nm (1400W, 0.4Pa) exhibit the resistivity of $3.92*10-3{\Omega}/cm$ and the transmittance of 96.9% at 550nm.

• 월간포장계
• /
• 통권144호
• /
• pp.62-65
• /
• 2005

• 월간포장계
• /
• 통권124호
• /
• pp.71-75
• /
• 2003

• 월간포장계
• /
• 통권229호
• /
• pp.42-45
• /
• 2012

• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.595-605
• /
• 2018

최근 우수한 유연성과 화학적 안정성 등을 가진 고분자 수지와 우수한 기계적 성질 등을 나타내는 무기 재료로 이루어진 나노 복합 시스템으로써 유-무기 하이브리드 코팅 필름에 관한 연구가 활발히 진행되고 있다. 아크릴레이트 단량체로써 사용된 o-phenylphenoxyethyl acrylate (OPPEA)는 1.576의 높은 굴절률을 나타내고, Bisphenol A ethoxylate diacrylate (BAEDA)는 굴절률은 낮지만 경화된 고분자의 경도를 향상시킨다. 또한, 무기 소재로써 사용된 지르코니아는 산화지르코늄으로써 우수한 내구성과 광학특성 등을 나타낸다. 본 연구에서는 광학 특성을 향상시키기 위한 목적으로 아크릴레이트 단량체 중 BAEDA의 함량을 조절하여 필름을 제조한 뒤 연필 경도계와 아베굴절계를 이용하여 광학 특성 변화를 확인하였고, UV-vis spectrophotometer을 이용해 투과도를 비교하여 최적의 조건을 확립하였다. 그리고 실란 커플링제인 ${\gamma}$-methacryloxypropyltrimethoxysilane (MPS)를 사용하여 지르코니아를 소수화 처리하여 아크릴레이트 단량체에 대한 분산성을 향상시키고, 개질 전후의 물에 대한 분산성 변화를 조사하여 물에 대한 친화력이 감소하였음을 확인하였고, FT-IR ATR spectrophotometer를 통해 MPS에 의해 도입된 $1716cm^{-1}$에서의 에스터 C=O 결합 peak의 존재를 통해 MPS에 의한 지르코니아 표면의 개질 반응이 진행되었음을 확인하였다. 또한, 지르코니아의 표면에 도입된 규소 원자의 존재는 X 선 형광법을 이용하여 확인하였다. 그리고 화학적으로 개질된 지르코니아를 아크릴레이트 단량체에 도입하여 광경화 필름을 제조하였을 때, 굴절률은 아크릴레이트 자체 필름보다 1.2% 향상되었음을 확인하였고, SEM/EDS mapping 분석을 통해 PET 필름에 코팅된 개질 후 지르코니아가 아크릴레이트 코팅층에 균일하게 분포되어 있음을 알 수 있었다.

• 한국재료학회지
• /
• 제14권3호
• /
• pp.203-210
• /
• 2004

Effects of various pretreatments on the adhesion of copper-coated polymer films were investigated. Copper-coated polymer films were prepared by an electron cyclotron resonance-metal organic chemical vapor deposition (ECR-MOCVD) coupled with a DC bias system at room temperature. PET(polyethylene terephthalate) film was employed as a substrate material and it was pretreated by industrially feasible methods such as chromic acid, sand-blasting, oxygen plasma and ion-implantation treatment. Surface characterization of the copper-coated polymer film was carried out by AFM(Atomic Force Microscopy) and FESEM(Field Emission Scanning Electron Microscopy). Surface energy was calculated by based on the value of the contact angle measured. The adhesion of copper/PET films was determined by a pull-off test according to ASTM D-5179. It was found that suitable pretreatment of the PET substrate was required for obtaining good adhesion property between copper films and the substrate. In this study the highest adhesion was observed in sand-blasting, and then followed by those of acid and oxygen plasma treatment. However, the effect of surface energy was insignificant in our experimental range. This is probably due to compensating the difference in surface energy from various pretreatments by exposing substrate to ECR plasma for 5 min or longer at the early stage of the copper deposition. Therefore, it can be concluded that surface roughness of the polymer substrate plays an important role to determine the adhesion of copper-coated polymer for the deposition of copper by ECR-MOCVD.

• 한국염색가공학회지
• /
• 제3권1호
• /
• pp.8-16
• /
• 1991

In order to investigate the fine structure of PET films, PET films were stretchd at various draw ratios (2, 3, 4, 5) below $T_g$ ($72^{\circ}C$) and then annealed at various temperatures (125, 150, 175, $200^{\circ}C$) under free-annealed (FA) and taut-annealed (TA) conditions. Such changes as thermal shrinkage, crystallinity, crystallite size, dynamic viscoelasticity and thermal behaviour were measured in relation to the draw ratio and annealing condition.The following results were obtained. 1. Thermal shirinkage increased with increasing annealing temperature and draw ratio, but decreased in case of draw ratio 4 (draw ratio 3 at $200^{\circ}C$) and above it. 2. The degree of crystallinity of FA samples were higher than those of TA samples. 3. Tan 5 of TA samples were less than those of FA samples, and storage moduli (E') and loss moduli (E") of FA samples were less than those of TA samples; moreover, maximum tan '||'&'||' temperature of FA samples were shifted toward higher temperature than those of TA samples. 4. The melting endotherm ($T_m$) and heat of fusion $(\DeltaH)$ of the PET film increased with the draw ratio and annealing temperature; in addition, premelting endotherm ($T_m$) and heat of fusion $(\DeltaH)$ of the local crystallization in the FA samples were larger than those of TA samples. 5. The X-ray diffraction pattern displayed sharp peaks gradually with the draw ratio and annealing temperature. 6. Crystallite sizes of FA samples were larger than those of TA samples.