• 제목/요약/키워드: PET Fiber

검색결과 465건 처리시간 0.024초

고양이의 직장질루가 병발한 Type III 선천성 항문무형성증의 수술적 교정 (Surgical Correction of Congenital Type III Atresia ani with Rectovaginal Fistula in a Cat)

  • 김민경;황용현;최우;이재훈
    • 한국임상수의학회지
    • /
    • 제30권5호
    • /
    • pp.376-379
    • /
    • 2013
  • 4주령의 0.6 kg 암컷 스콧티쉬 폴드 고양이가 예방 접종을 위해 내원하였다. 신체 검사에서 수양성 분변이 질에서 나오는 것이 확인 되었고 항문은 폐쇄되어 있었다. 방사선 양성 조영 검사에서 직장질루, 확장된 결장이 확인 되었다. 영상 검사에 기초하여 Type III 의 항문 무형성과 직장 질루가 병발한 것으로 최종 진단 하였다. 수술적인 직장 질루의 폐쇄와 항문의 재건이 실시되었다. 수술 후 소화능력을 향상시키기 위해서 락툴로즈와 식이요법을 실시 하였고, 고양이는 수술 후 2주에 배변 조절이 가능해졌으며, 8개월 후 추적조사에서 합병증 없이 배변조절 상태가 유지 되었다.

자동차용 소리, 진동 차단성 소재기술 (Materials Technology for Car Sound and Vibration Barriers)

  • 김기석;최경은;류정석;권영민;강창기;윤우원;박수진
    • Elastomers and Composites
    • /
    • 제46권1호
    • /
    • pp.10-21
    • /
    • 2011
  • 최근 자동차 산업의 발전과 더불어 수요자의 요구가 다양화, 고급화됨에 따라 차량의 흡/차음에 대한 관심이 크게 증가하고 있다. 일반적으로 차내의 소음과 진동을 줄일 수 있도록 하기 위하여 섬유재료(펠트, 유리섬유), 폴리우레탄 foam, PET 섬유재료 등과 같은 소음진동 흡수재료를 사용되고 있다. 이러한 소음 진동을 위한 흡/차음재료들은 자동차에 장착되어 다양한 부분에서 발생하는 소음 및 진동을 차단하여 쾌적한 승차감을 주는 주요한 부품으로 자리잡고 있다. 또한, 차량의 소음 진동 제거를 위한 자동차용 흡/차음재료의 요구는 최근들어 더욱 높아지고 있으며 소음 진동 저감 이외에 연비개선을 위한 경량화, 비용절감 등도 함께 고려되고 있다. 따라서 본고에서는 자동차 내장 흡/차음재료의 필요성과 더불어 관련기술에 대하여 중심으로 살펴보도록 하겠다.

음향방출법을 이용한 평판형 압전 복합재료 작동기의 파괴거동 해석 (Analysis of the Fracture Behavior of Plate-type Piezoelectric Composite Actuators by Acoustic Emission Monitoring)

  • 우성충;구남서
    • 비파괴검사학회지
    • /
    • 제26권4호
    • /
    • pp.220-230
    • /
    • 2006
  • 3점 굽힘 하중을 받는 단일 PET 및 평판형 압전 복합재료 작동기(PCA)의 파괴거동을 음향방출(AE) 법을 이용하여 살펴보았다. 단일 PET의 경우 최대 굽힘하중에서 발생한 AE신호는 고진폭 및 긴 유지시간을 갖는 특징을 보였으며 FFT에 의한 지배 주파수 대역을 확인한 결과 $100{\sim}230kHz$의 비교적 저주파수 대역이었다. PCA의 경우, stage 1에서 발생한 80dB이상의 고진폭 및 $170{\sim}223kHz$의 저 지배 주파수 대역을 갖는 신호는 PZT층에서의 취성파괴 및 PZT층과 인근 섬유층 사이의 층간분리에 의한 것으로 추정되었다. 상기의 AE거동 해석결과와 광학현미경 및 주사전자현미경에 의한 손상관찰에 근거하여 비대칭으로 적층된 PCA의 파괴거동과 관련한 AE특성을 규명하였다.

폴리카보네이트 성분을 포함하는 수분산 폴리우레탄의 제조와 인공피혁 함침가공에의 응용 (Preparation of Waterborne Polyurethanes Containing Polycarbonate Component and Their Applications to the Impregnation Finishing for Artificial Leathers)

  • 이경우;고재훈;심재윤;김영호
    • 폴리머
    • /
    • 제33권2호
    • /
    • pp.175-182
    • /
    • 2009
  • Isophorone diisocyanate(IPDI)를 이소시아네이트 화합물로 사용하고, poly (tetramethylene glycol)(PTMG)과 polycarbonate diol(PCD)을 혼합한 폴리올을 사용하여 선형 수분산성 폴리우레탄(WPU)을 합성하고, 이들을 필름으로 캐스팅하여 폴리카보네이트(PC) 함량 변화에 따른 기계적 특성과 염색성, 내알칼리성 변화를 분석하였다. WPU 필름에 PC 성분의 함량이 증가함에 따라 인장강도는 증가하고 파단신도는 감소하였으며, 분산염료에 대한 겉보기 염착량이 감소하였지만, 내알칼리성은 영향이 없었다. 합성한 WPU 용액을 PET 섬유 인공피혁용 함침가공제로 사용한 결과, PTMG 만을 폴리올로 사용한 WPU 수지로 처리한 경우보다 인공괴혁의 마찰견뢰도, 일광견뢰도, 내세탁성 등 염색견뢰도를 크게 증가시킬 수 있었다.

숯을 이용한 대두직물의 염색 (Dyeing of Soybean Fabrics using Charcoals)

  • 이솔;이신희
    • 한국의류산업학회지
    • /
    • 제18권4호
    • /
    • pp.531-539
    • /
    • 2016
  • Charcoal dyed fabrics have been widely used in home textiles and functional clothing due to their anti-statics, antibacterial, deodorization, far infrared emitting and anion releasing. Soybean fiber were regenerated from soybean. Soybean fiber have biodegradable, microbiocidal, non-allergic, and anti-ageing properties. The purpose of this study is to investigate the dyeing characteristics of soybean fabric using charcoal as colorants. Soybean fabrics were dyed with charcoal solution according to concentration of charcoal, dyeing temperature, and dyeing time. To improve washing fastness and investigate mordanting condition, soybean fabric and dyed soybean fabric with charcoal were mordanted by mordanting agents such as $CH_3COOH$(acetic acid), NaCl(sodium chloride) and $AlK(SO_4)_2{\cdot}12H_2O$(Aluminium Potassium Sulfate). Dyeability and color characteristics of charcoal dyed soybean fabric were obtained by computer color matching and SEM morphology analysis. Particle size of charcoal and color fastness were also investigated. The results obtained were as follows; Mean average diameter of charcoal was $1.39{\mu}m$. The dyeability of soybean fabric using charcoal as colorants was increased gradually with increasing concentration of charcoal dyeing solution and saturated at about 8%(o.w.b.). The optimum dyeing temperature and dyeing time were $90{\sim}105^{\circ}C$ and 60~90 minutes respectively. The overall wash fastness at dyeing concentration 2~4%(o.w.b.) and 6~10%(o.w.b.) were 4 degree and 3-4 degree respectively. The fastness to washing according to mordanting method indicated good grade result as more than 4 degree in all conditions. On the other hand, the staining of adjacent fabrics, i.e. PET, Acryl, Wool, Acetate, Nylon and Cotton was found to be of grade 4 or 4-5 in all conditions.

시판세제의 세정성과 Rolling-up의 상관성에 관한 연구 (A study on the Correlationship between Detergency of Commercial Detergents and Rolling-up)

  • 이경미;차옥선
    • 한국의류학회지
    • /
    • 제10권3호
    • /
    • pp.27-36
    • /
    • 1986
  • The purpose of this study was, to estimate the detergency of commercial detergent and to examine the interrelationship between detergency and detergent characteristics, detergent concentration, fiber characteristics, and Rolling-up phenomenon which is the major removal mechanism of oily soil. A mixture of oleic acid-olive oil was used as oily soil. The detergency was estimated by analysis of oleic acid on cotton ana polyester fabrics before and after washing by means of liquid scintillation counting. The Rolling-up of oily soil from PET film was observed and change of contact angle and removal time were measured. The results were as follows ; 1. In the case of soaps and powder synthetic detergents, the optimum concentrations we-re about $0.2\~0.3\%$. And detergencies of liquid synthetic detergents were considerably low, and the detergency was continually increased up with increasing concentration to $0.5\%$, which seemed to be caused by the lower pH than that of soap and powder synthetic deter-gent solutions. 2. As the effect of external or internal fiber structure; the detergency of cotton was lower than that of polyester. 3. In the observation of Rolling-up, the contact angle increased and the Rolling-up time became shorter with increasing detergent concentrations ($0.05\~0.5\%$). And it was confirmed that detergency was increased with Rolling-up effect. In addition, the study on the actual laundry condition was studied using the questionaire. From the results, about $76\%$ of households used the concentration of detergent roughly or excessively and housewives were highly concerned on the recommended dose, but grade of practice were very low.

  • PDF

전기방사를 이용한 리그닌 나노섬유의 제조 (Fabrication of Lignin Nanofibers Using Electrospinning)

  • 이은실;이승신
    • 한국의류학회지
    • /
    • 제38권3호
    • /
    • pp.372-385
    • /
    • 2014
  • Lignin is an abundant natural polymer in the biosphere and second only to cellulose; however, it is under-utilized and considered a waste. In this study, lignin was fabricated into nanofibers via electrospinning. The critical parameters that affected the electrospinnability and morphology of the resulting fibers were examined with the aim to utilize lignin as a resource for a new textile material. Poly(vinyl alcohol) (PVA) was added as a carrier polymer to facilitate the fiber formation of lignin, and the electrospun fibers were deposited on polyester (PET) nonwoven substrate. Eleven lignin/PVA hybrid solutions with a different lignin to PVA mass ratio were prepared and then electrospun to find an optimum concentration. Lignin nano-fibers were electrospun under a variety of conditions such as various feed rates, needle gauges, electric voltage, and tip-to-collector distances in order to find an optimum spinning condition. We found that the optimum concentration for electrospinning was a 5wt% PVA precursor solution upon the addition of lignin with the mass ratio of PVA:lignin=1:5.6. The viscosity of the lignin/PVA hybrid solution was determined as an important parameter that affected the electrospinning process; in addition, the interrelation between the viscosity of hybrid solution and the electrospinnability was examined. The solution viscosity increased with lignin loading, but exhibited a shear thinning behavior beyond a certain concentration that resulted in needle clogging. A steep increase in viscosity was also noted when the electrospun system started to form fibers. Consequently, the viscosity range to produce bead-free lignin nanofibers was revealed. The energy dispersive X-ray analysis confirmed that lignin remained after being transformed into nanofibers. The results indicate the possibility of developing a new fiber material that utilizes biomass with resulting fibers that can be applied to various applications such as filtration to wound dressing.

In Vivo Measurement of Site-Specific Peritoneal Solute Transport Using a Fiber-Optic-based Fluorescence Photobleaching Technique

  • Lee, Donghee;Kim, Jeong Chul;Shin, Eunkyoung;Ju, Kyung Don;Oh, Kook-Hwan;Kim, Hee Chan;Kang, Eungtaek;Kim, Jung Kyung
    • Journal of the Optical Society of Korea
    • /
    • 제19권3호
    • /
    • pp.228-236
    • /
    • 2015
  • Fluorescence recovery after photobleaching (FRAP) is a well-established method commonly used to measure the diffusion of fluorescent solutes and biomolecules in living cells or tissues. Here a fiber-optic-based FRAP (f-FRAP) system was developed, and validated using macromolecules in water and agarose gels of different concentrations. We applied f-FRAP to measure the site-specific diffusion of fluorescein (NaFluo) in peritoneal membranes (PMs) on the liver, cecum, and kidney of a living rat during peritoneal dialysis. Diffusion of fluorescein in PM varied in a time-dependent manner according to the type of organ ($D_{PM\;on\;Liver}/D_{NaFluo}=0.199{\pm}0.085$, $D_{PM\;on\;Cecum}/D_{NaFluo}=0.292{\pm}0.151$, $D_{PM\;on\;Kidney}/D_{NaFluo}=0.218{\pm}0.110$). The proposed method allows direct quantitative measurement of the three-dimensional diffusion in local PM in vivo, which was previously inaccessible by peritoneal function test methods such as peritoneal equilibration test (PET) and standardized PM assessment (SPA). f-FRAP is promising for local and dynamic assessments of peritoneal pathophysiology and the mass transport properties of PMs, presumed to be affected by variation of tissue structures over different organs and functional changes of the PM with years of peritoneal dialysis.

Comparative evaluation of nutritional values in different forage sources using in vitro and in vivo rumen fermentation in Hanwoo cattle

  • Lee, Hu Seong;Lee, Sung Dae;Lee, Seul;Sun, Sangsoo;Kim, Minseok;Choi, Hyuck;Lee, Yookyung;Baek, Youl-Chang
    • 농업과학연구
    • /
    • 제47권4호
    • /
    • pp.941-949
    • /
    • 2020
  • This study evaluated the nutritional value of Italian ryegrass (IRG) as a forage source for Hanwoo. The nutritional value of IRG was assessed and compared to that of rice straw, oat hay, and timothy hay using two different methods: 1) in vitro ruminal fermentation 2) in vivo total tract digestibility. In vitro DM digestibility was lower in rice straw compared to the other three forage sources after both 24 and 48 h of incubation (p < 0.01). Among the four forage sources, IRG had a higher NH3-N concentration after both 24 and 48 h of incubation (p < 0.01). In the in vivo digestibility trials, four different substrates were used: 1) 80% concentrate with 20% rice straw, 2) 80% concentrate with 20% oat hay, 3) 80% concentrate with 20% IRG, and 4) 80% concentrate with 20% timothy hay. The dry matter, crude protein, non-fiber carbohydrate, and detergent fiber digestibility were the greatest in the C80-IRG20 among the four forage groups. In summary, IRG had a similar level of energy efficiency compared to oat hay and timothy hay. Furthermore, the result of the chemical composition analysis showing a higher ammonia concentration in the in vitro fermentation experiment and the high protein digestibility in the in vivo experiment indicate that IRG is a good source of protein compared to oat hay and timothy hay.

고감성 의류용 직물의 수분이동특성 -섬유소재와 실 특성 및 실험방법에 따른 수분이동특성- (Moisture Transmission Characteristics of Fabric for High Emotional Garments -Moisture Transmission Characteristics according to Fiber Properties, Yarn Characteristics and Test Method-)

  • 김승진;김현아
    • 한국의류학회지
    • /
    • 제41권1호
    • /
    • pp.28-42
    • /
    • 2017
  • Moisture transfer characteristics of high emotional garments are important to evaluate wear comfort. Wicking and drying measurement methods are also critical for perspiration absorption and quick dry fabric made of high functional fibers. In this study, the wicking and drying properties of high emotional fabrics made from hybrid composite yarns using CoolMax, Tencel, Bamboo staple fibers and PP. PET CoolMax filaments were also measured and analyzed according to various measuring methods. The wicking property of hybrid composite yarn fabrics by Bireck method was mostly influenced by the structure of hybrid yarns than the absorption rate of constituent fibers; however, both the hygroscopicity of fibers and the composite yarn structure affected the wicking property of the fabrics in the drop method. Concerning drying properties, the KSK 0815B method measuring distilled moisture weight was more relevant to explain the drying characteristics of hybrid yarn fabrics than the KSK 0815A method measuring the time to drying. This study revealed that the drying properties of hybrid yarn fabrics were influenced by the hygroscopicity of constituent fibers, wicking properties of constituent yarns and structure of composite yarns.