• 한국염색가공학회지
• /
• 제8권5호
• /
• pp.68-75
• /
• 1996

Even if fibers are practically identical with respect to chemical composition and denier, the dyeabilities are freqently a little different in an industrial processing. It is difficult to interpret the numerical values of dye diffusion coefficients from a dye solution into fibers. The main reasons are the multicomponent nature of the diffusion process and the inhomogeneities of the substrate, so-called, various kinds of ordered and disordered regions of polymers, void and pores. The equilibrium dye adsorptions and dyeing rates of a disperse dye into the several PET fibers having the same denier were determined at various temperatures. The dyeability of examined samples was divided into two groups, that is, lower dye adsorption fiber and higher ones at the lower temperatures. This result was discussed with the degree of crystallinity, DSC diagram, X-ray diffractometry and Porosimetry of the PET fiber, and an appropriate model for fine structure of PET fiber was proposed.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.1024-1031
• /
• 2012

The thermal bonding PET fabrics were produced through high temperature steaming (HTS) of low melting PET yarn as warp and composite fancy yarn containing low melting PET yarn as weft. The low melting PET yarn of sheath-core structure consisted of a regular PET in core portion and low melting PET in sheath portion. The composite fancy yarn consisted of regular PET yarn as inner part and effect part and low melting PET yarn as binding part. This study was carried out to investigate the melting behavior of thermal bonded PET fabric, the effect of HTS on the thermal bonding, mechanical properties, and dyeing properties. The melting peak of low melting PET yarn showed two melting peaks caused by sheath-core structure. Almost the entire thermal bonding of the fancy PET fabrics containing low melting PET yarn has formed at $200^{\circ}C{\times}3min$ of HTS. The tensile strength in warp and weft direction of the fancy PET fabrics slightly decreased as temperature of HTS increased. The total K/S value of the fancy PET fabrics decreased slightly to $180^{\circ}C{\times}3min$ of HTS, while increased slightly above $200^{\circ}C{\times}3min$ of HTS. The changes in the hue angle ($H^{\circ}$) of the thermal bonded fancy PET fabrics dyed with disperse dyes hardly ever happened.

• 한국염색가공학회지
• /
• 제26권1호
• /
• pp.22-31
• /
• 2014

This study investigated the physical properties of warm up yarns and their knitted fabrics including the dye affinity and color fastness to washing of these knitted fabrics according to the various dyeing times and temperatures on dyeing process. The results were summarized as follows. The tenacity of Nylon/PP warm-up yarn was 4g/d and breaking strain was 4.5%. The wet and dry thermal shrinkages were higher than those of PET warm-up yarn. The maximum heat flow rate(Qmax) of Nylon/PP warm-up knitted fabric was lower than that of PET warm-up knitted fabric and heat keeping rate(a) of Nylon/PP warm-up knitted fabric was higher as 47% than that of PET warm-up knitted fabric. It was shown that the shape retention and wearing comfort of Nylon/PP warm-up knitted fabric were better than those of PET warm-up knitted fabric. The dye-affinity(K/S) of Nylon/PP warm-up knitted fabric showed maximum value at the dyeing condition of 40minute or 50minute dyeing time with $80^{\circ}C$ dyeing temperature, but PET warm-up knitted fabric showed maximum value at the 30minute or 40minute with $110^{\circ}C$ dyeing temperature. Finally, the color fastness to washing of Nylon/PP warm-up knitted fabric showed good value as between 4 and 5 grade.

• 한국의류학회지
• /
• 제3권2호
• /
• pp.37-41
• /
• 1979

In order to obtain tasic information for solvent dyeing, polyethylene terephthalate (PET) films was pretreated with water, tetrachloroethylene (TCE) and water/TCE emulsion for three hours at $140^{\circ}C$ for stabilizing the substrate. By film roll cyliderical method, Disperse Red 60, Disperse Yellow 42, and Disperse Blue 27 were diffused in the films and examined dyeing properties. The results are summarized as follows; 1) Diffusion coefficient increases in the order, waterTCE>water/TCE 2) A linear relationship between diffusion coefficient and shrinkage was Observed 3) The temperature dependence of the diffusion coefficient can't be expressed by WLF equation.

• 패션비즈니스
• /
• 제9권2호
• /
• pp.57-70
• /
• 2005

Chitosan pre-treatment of the fabrics prior to the dyeing processes has been reported to increase the uptake of natural dyestuffs. In this study, cotton, nylon, and PET fabric specimens were pre-treated with chitosan prior to the dyeing (Method 1), or the state of chitosan acid salt formation, coated on the yarn surface, was destroyed prior to the dyeing process by alkaline neutralization process (Method 2). In case of the acid salt formed cotton (Method 1), treated fabrics showed more yellowish color component of cochineal, while alkali-treated (Method 2) cotton showed more uptake of bluish color of cochineal.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.239-246
• /
• 2017

Recently fiber-reinforced thermoplastic composites have attracted great interest from industry and study because they offer unique properties such as high strength, modulus, impact resistance, corrosion resistance, and damping reduction which are difficult to obtain in single-component materials. The demand for plastics is steadily increasing not only in household goods, packaging materials, but also in high-performance engineering plastic and recycling. As a result, the technology of recycling plastic is also attracting attention. In particular, many paper have studied recycling systems based on recycled thermoplastics. In this paper, properties of Glass Fiber Reinforced Thermoplastic(GFRTP) materials were evaluated using recycled PET for injection molding bicycle frame. The effect on thermal and mechanical properties of recycled PET reinforced glass chop fiber according to fiber cross section and fiber content ratio were studied. And it was compared void volume and torque energy by glass fiber cross section, which is round section and flat section. Mechanical characteristics of resulting in GF/rPET has been increased by increasing fiber contents, than above a certain level did not longer increased. And mechanical properties of flat glass fiber reinforced rPET with low void volume were most excellent.

• 한국염색가공학회지
• /
• 제32권1호
• /
• pp.9-18
• /
• 2020

In this study, we conducted alkali hydrolysis on sea-island type PET ultramicrofiber tricot fabric and dyeing according to the various conditions with black disperse dye. Herein, we evaluated the weight loss rate and tensile strength according to the NaOH contents. The optimal alkali hydrolysis treatment conditions were set to 25 %omf NaOH with a treatment time of 60 min at 110 ℃, and average weight loss rate of the PET ultramicrofiber tricot fabric is about 23 %. The dyeing conditions were investigated with different dyeing temperatures(95-135 ℃), dyeing time(20-60 min), dye contents(2-10 %omf), dispersant contents(1-9 g/ℓ), pH buffer solution contents(1-9 g/ℓ), UV-absorbent contents(5-25 %omf) and reduction cleaning process conditions for black color. We obtained the optimum conditions of the dyeing with the dye contents of 8 %omf, the dispersant contents of 1 g/ℓ, the pH buffer solution contents of 1 g/ℓ, the UV-absorbent contents of 10 %omf, the dyeing temperature of 135 ℃ and the dyeing time of 40 min. The light colorfastness of dyed ultramicrofiber PET tricot fabric was good to excellent in the range of 4 to 5.

• 한국의류학회지
• /
• 제37권7호
• /
• pp.952-961
• /
• 2013

This study optimizes a suitable dyeing method for polylactic acid (PLA) fabrics using disperse dyes. For this, disperse red 60 (DR 60), disperse blue 56 (DB 56), and disperse yellow 54 (DY 54) were used and dyed on PLA fabrics dependent of dyeing temperature and time. The fastness of PLA fabrics dyed with three disperse dyes were evaluated; in addition, dye exhaustion, color strength (K/S value), and colorimetric properties of PLA fabrics were compared with PET fabrics. The experiments indicated optimum dyeability of PLA fabrics with disperse dyes. The dyeing temperature was $90^{\circ}C$ for every dye and the dyeing time were 20 min, 60 min, and 40 min for DR 60, DB 56, DY 54, respectively. PLA fabrics had good color fastness to washing, dry cleaning fastness, hot pressing fastness, rub fastness, and perspiration fastness by DR 60, DB 56, and DY 54. The dye exhaustion of PLA fabrics were lower than PET fabrics; however, K/S values were higher than PET fabrics.

• 패션비즈니스
• /
• 제9권1호
• /
• pp.57-66
• /
• 2005

In natural dyeing, a number of supplementary methods have been practiced since deep shades of the dyed fabrics are not developed satisfactorily. The methods include using the mordants effectively or subjecting the fabrics to reiterated dyeing processes. In this study, we obtained deep shades in the dyeing of fabrics using Rhusjara ica as the dyestuff and applied chitosan to the fabric specimens in order to diversify the colors. Silk fibers and PET(polyethylene terephthalate) fibers were pretreated using chitosan, and subsequently dyed using different types of mordants. As the mordanting agents, Al, Sn, and Fe were employed. Various shades have been resulted in since the interactions of the mordants are different toward the silk fibers and PET fibers. In this study, we investigated the effect of the chitosan treatment along with the change of the mordanting agents on the color change for the silk and PET fibers.

• 한국염색가공학회지
• /
• 제12권6호
• /
• pp.396-403
• /
• 2000

The purpose of this study was to investigate the dyeing properties of silk, wool, nylon and poly(ethylene teraphtlate)〔PET〕 fabrics dyed with Tumeric(Curcuma longa) extracts. The dyeing property and color fastness were investigated by using the extracts and the post mordanting with Aluminum, Copper and Iron salts. In the UV-visible spectra, the maximum absorption of wavelength of the extract with methyl alcohol appeared at 420nm, and that of the extract with distilled water was at 415nm. Increasing the dyeing temperature, the K/S values of dyed fabrics were increased. The optimum dyeing condition was 30∼60 minute of dyeing time at pH 5∼5.6. Surface colors of silk and wool became dark by using mordants compared to those of nylon and PET fabrics. The drycleaning fastness of fabrics dyed with the extracts was good. The laundering and light fastness were improved by using mordants.