• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.65-68
• /
• 2000

Polyethylene, has long history and is widely used, was researched due to good electrical properties by many authors. But PE under stress has the critical defects of space charge accumulation and tree growth, so various methods such as catalyst, additives and blend to improve these problems have been execute, of which we selected blending method. As in our previous papers we investigated electrical conduction, dielectric and AC dielectric breakdown characteristics, we did DC dielectric breakdown characteristics in this paper. We selected pure LLDPE, pure EVA and LLDPE films mixed with EVA as specimens, which were mixed with the weight percentages of 50, 60, 70 and 80[wt%] to be thin film. DC applying voltage speed was 500[V/sec]. The relation between dielectric breakdown characteristics and the variations of super structure due to mixing was investigated, and especially trap level at amorphous region, threshold energy increment of conductive electron at free volume were considered.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.59-69
• /
• 2005

일본의 농림수산성은 ${\ulcorner}$농업용 폐플라스틱${\lrcorner}$으로 호칭하고 있다. 연간배출량은 약 16 만톤에 이르고 있고, 이의 처리내용은 재생 38%, 매립 32%, 소각 11%, 등이다. 재생처리단계는 민간사업자가 기본으로, 처리내용은 일반적으로 PVC가 바닥재로써 쓰이고 PE가 서멀(연료)로써 쓰인다. 그러나 최근에 와서 비닐에 혼합되어 있는 이물질을 완전제거해 일정량의 버진과 배합함으로써 비닐을 반영구적으로 순환해 사용할 수 있는 기술이 개발되어 졌다. 이 싸이클시스템은 21 세기의 절약형사회에 적합한 것으로, 버진제품보다 저가에 공급되어 농업경영의 안정화에도 기여하고 있다. 한번 사용한 농업용 생산자재를 회수해 다시 생산자재로서 활용, 끝없이 순환한다는 개념이 뒷받침하는 이 기술은 향후 환경과 자원의 문제해결이라는 주목할 만한 가치가 있다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.175-176
• /
• 2009

연성 기판을 기초로 하는 플렉서블 디스플레이 등의 연성 소자에 적용되는 TCO, 투습방지막의 기계적 특성을 시험하였다. 실제 사용 환경에서의 기계적 특성을 평가하기 위하여 굽힘시험과 인장시험을 적용하였다. PET 기판위에 PE-CVD 공정으로 성장된 실리콘 산화물 ($SiO_x$) 박막과 그 위에 스퍼터링 공정으로 성장된 투명 전도성 산화물 (TCO, Transparent Conducting Oxide) 박막의 시험 결과, 균열 생성 임계 변형량은 TCO 박막에 의해서 결정됨을 알 수 있었다. 따라서 향상된 기계적 특성을 얻기 위해서는 TCO 박막의 특성 제어가 필요하다.

• Korean Journal of Materials Research
• /
• v.13 no.9
• /
• pp.598-605
• /
• 2003

The optimized conditions for the cross-sectional TEM sample preparation using tripod polisher and ion-beam miller was confirmed by AFM and TEM. For the TEM observation of interfaces including InGaN layers like InGaN/GaN MQW structures, the sample preparation by the only tripod polishing was useful due to the reduction of artifacts. On the other hand, in case of the thick nitride films like ELO, PE, and superlattice, both tripod polishing and controlled ion-beam milling were required to improve the reproducibility. As a result, the ion-beam milling with the $60^{\circ}$modulation showed the minimum height difference between film and sapphire interface and the ion-beam milling of the $80^{\circ}$modulation showed the broad observable width.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.313-318
• /
• 1999

This study is basic research to improve quality of asphalt concrete mixture, to preserve environment, and to recycle waste vinly. The mixing method and proper content of waste vinyl were determined through preliminary mix design. This study performed mix designs using 2 type gradations of aggregate in addtion content of wate vinly. Marshall stability at optimum asphalt content of asphalt concrete mixture addtin wate vinly was satisfied with the specification of the Ministry of Construction and Transportation , and its values indicated that dense grade asphalt concrete mixture containing waste vinyl were higher than common dense grade mixture (control). From this study, it was confirmed that addtion of waste vinyl improved quality of asphalt concrete mixture.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.6
• /
• pp.53-57
• /
• 1985

Comparisons and analyses were made of the properties of double or triple passivation layer structures composed of APCVD SiOt or PSG and PECVD SiN films with various layer combinations and layer thicknesses. As a result of the analyses of the pro.peHics such as threshold-voltage shift, crack resistance, pinhole density, and moisture reslstancei a con-clusion was reached that the proper passivation layer structure is the double layer consisting of a 4,00$\AA$ or thicker PSG film and a 6,000$\AA$ SiN film.

• Journal of the Korean Society of Safety
• /
• v.4 no.1
• /
• pp.5-14
• /
• 1989

Deterioration induced by partial discharge was investigated for low-density polyethylene samples. Under an electrical field, a cold-drawn PE film was stretched perpendicularly to the direction of the original drawing. The starting voltage of the discharge shows a minimum at the draw ratio of 1.2 to 1.8. Around the same draw ratio, the elastic modulus and mechanical loss factor (tan S) of the sample exhibit a minimum and a maximum, respectively. According to the X-ray analysis, the size itf microcrystals decreases with increasing draw ratios. Reorientation of the ru01ecular chains was observed above a draw ratio of 1.5 by the IR method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.65-68
• /
• 2000

Polyethylene, has long history and is widely used, was researched due to good electrical properties by many authors. But PE under stress has the critical defects of space charge accumulation and tree growth, so various methods such as catalyst, additives and blend to improve these problems have been execute, of which we selected blending method. As in our previous papers we investigated electrical conduction, dielectric and AC dielectric breakdown characteristics, we did DC dielectric breakdown characteristics in this paper. We selected pure LLDPE, pure EVA and LLDPE films mixed with EVA as specimens, which were mixed with the weight percentages of 50, 60, 70 and 80[wt%] to be thin film. DC applying voltage speed was 500[V/sec]. The relation between dielectric breakdown characteristics and the variations of super structure due to mixing was investigated, and especially trap level at amorphous region, threshold energy increment of conductive electron at free volume were considered.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.185-191
• /
• 2012

This study was performed to screen fallow crops during winter period for improvement of soil quality and utilizing as mulching material in watermelon cropping system during winter period. Five fallow crops, mainly, hairy vetch, barley, rye, oat and wheat, were sown in early November. They were mowed for covering the soil surface instead of polyethylene (PE) film before watermelon planting in early April the following year. The highest absorbed nutrients and dry matter yield were found in rye. Bulk density in plots with fallow crop was lower than control plot. There was observed no significant differences among the fallow crops. However, porosity was the lowest in control plot. Soil EC reduced to 12%, 13%, 14%, 16% and 22%, respectively, by cultivation of hairy vetch, oat, wheat, barley and rye. Microbial biomass carbon and dehydrogenase activities were higher in soil treated with gramineous crops, such as barley, rye and oat. The growth of watermelon was more affected by regeneration of fallow crop than the occurrence of weed, especially in plots treated with rye or oat. Also, the fruit damage by aphid was found severe in these treatment plots. The fruit yield in plots treated with hairy vetch and barley was increased 5.7% and 2.6%, respectively, compared to that of PE films. The present experiment findings implied that these fallow crops had significant beneficial effects on improvement of soil qualities and could be utilized for mulching materials in watermelon cropping system.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.3
• /
• pp.205-212
• /
• 1999

This study was carried out to examine the effect of polyethylene film color and removing time of the mulching film in yacon (Polymnia sonchiiolia Poepp. & Endl.). The plant height on nonmulching was smaller about 10 cm or larger with 112cm than on other mulches ranged with $134{\sim}139$ cm at harvesting, and other characters examined were similar to that of plant height. The weight of tuberous root per plant was heavier on mulches ranged with $0.79{\sim}0.91$ kg than on non-mulching with 0.61 kg. Among the kind of mulches, plant height was the tallest with 139 cm in combination and declined in order of transparent, green and black polyethylene films. Yields among colored polyethylene films were the heaviest with 0.91 kg per plant in combination, 0.88 kg in black and 0.84 kg in green. In growth and yield full mulching untill harvesting was more effective than the other removed mulching treatments. It was effected on growth promotion at early growth stage, soil temperature and water preservation.