• Title/Summary/Keyword: PDN

Search Result 48, Processing Time 0.037 seconds

Impedance Calculation of Power Distribution Networks for High-Speed DRAM Module Design (고속DRAM모듈 설계에 대한 전원평면의 임피던스계산)

  • Lee, Dong-Ju;Younggap You
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.39 no.3
    • /
    • pp.49-60
    • /
    • 2002
  • A systematic design approach for Power distribution network (PDN) is presented aiming at applications to DRAM module designs. Three main stages are comprised in this design approach: modeling and simulation of a PDN based on a two-dimensional transmission line structure employing a partial element equivalent circuit (PEEC); verification of the simulation results through comparison to measured values; and design space scanning with PDN parameters. Impedance characteristics for do-coupling capacitors are analyzed to devise an effective way to stabilize power and ground plane Performance within a target level of disturbances. Self-impedance and transfer-impedance are studied in terms of distance between circuit features and the size of do-coupling capacitors. A simple equation has been derived to find the do-coupling capacitance values yielding impedance lower than design target, and thereby reducing the overall computation time. The effectiveness of the design methodology has been demonstrated using a DRAM module with discrete do-coupling capacitors and a strip structure.

Layout-Based Inductance Model for On-Chip Power Distribution Grid Structures (레이아웃 기반 온-칩 전력 분배 격자 구조의 인덕턴스 모델 개발 및 적용)

  • Jo, JeongMin;Kim, SoYoung
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.49 no.9
    • /
    • pp.259-269
    • /
    • 2012
  • With the lower supply voltage and the higher operating frequency in integrated circuits, the analysis of the power distribution network (PDN) including on-chip inductances becomes more important. In this paper, an effective inductance extraction method for a regular on-chip power grid structure is proposed. The loop inductance model applicable to chip layout is proposed and the inductance extraction tool using the proposed inductance model based on post layout RC circuits is developed. The accuracy of the proposed loop model and the developed tool is verified by comparing the test circuit simulation results with those from the partial element equivalent circuit (PEEC) model. The voltage fluctuation from the RLC circuits extracted by the developed tool was examined for the analysis of on-chip inductance effects. The significance of on-chip power grid inductance was investigated by the co-simulation of chip-package-PCB.

Design of Electromagnetic Band Gap Structure for Global Navigation Satellite Service (Global-Navigation Satellite Service를 위한 Electromagnetic Band Gap 구조체 설계)

  • Chung, Ki-Hyun;Jang, Young-Jin;Yeo, Sung-Dae;Jung, Chang-Won;Kim, Seong-Kweon
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.10 no.1
    • /
    • pp.27-32
    • /
    • 2015
  • In this paper, a mushroom typed electromagnetic band gap (EBG) structure to be inserted in the printed circuit board (PCB) inner layer in order to stabilize the PCB power line is proposed for global-navigation satellite service (GNSS). In designing the proposed EBG structure, the target stop-bandwidth was designed from 1.55GHz to 1.81GHz including GNSS and mobile communication-related frequency bandwidth. In this bandwidth, the insertion loss(S21) was observed below about -40dB. From the simulation results, it is expected that the stabilization of power delivery network (PDN) structure in the PCB circuit design should be improved and the effective correspondence to EMI will be helpful.

Analysis of Chip Performance by Core and I/O SSN Noise on DLL Board (DLL 보드 상에 코어 및 I/O 잡음에 의한 칩의 성능 분석)

  • Cho, Sung-Gon;Ha, Jong-Chan;Wee, Jae-Kyung
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.13 no.4
    • /
    • pp.9-15
    • /
    • 2006
  • This paper shows the impedance profile of PEEC(Partial Equivalent Electrical Circuit) PDN(Power Distribution Networks) including core and I/O circuit. Through the simulated results, we find that the core power noise having connection with I/O power is affected by I/O switching. Also, using designed $74{\times}5inch$ DLL(Delay Locked Loop) test board, we analyzed the effect of power noise on operation region of chip. Jitter of a DLL measure for frequency of $50{\sim}400MHz$ and compared with impedance obtained result of simulation. Jitter of a DLL are increased near about frequency of 100MHz. It is reason that the resonant peak of PDNs has an impedance of more the 1ohm on 100MHz. we present the impedance profile of a chip and board for the decoupling capacitor reduced the target impedance. Therefore, power supply network design should be considered not only decoupling capacitors but also core switching current and I/O switching current.

  • PDF

Glucocorticoids Impair the 7α-Hydroxycholesterol-Enhanced Innate Immune Response

  • Yonghae Son;Bo-Young Kim;Miran Kim;Jaesung Kim;Ryuk Jun Kwon;Koanhoi Kim
    • IMMUNE NETWORK
    • /
    • v.23 no.5
    • /
    • pp.40.1-40.14
    • /
    • 2023
  • Glucocorticoids suppress the vascular inflammation that occurs under hypercholesterolemia, as demonstrated in an animal model fed a high-cholesterol diet. However, the molecular mechanisms underlying these beneficial effects remain poorly understood. Because cholesterol is oxidized to form cholesterol oxides (oxysterols) that are capable of inducing inflammation, we investigated whether glucocorticoids affect the immune responses evoked by 7α-hydroxycholesterol (7αOHChol). The treatment of human THP-1 monocytic cells with dexamethasone (Dex) and prednisolone (Pdn) downregulated the expression of pattern recognition receptors (PRRs), such as TLR6 and CD14, and diminished 7αOHChol-enhanced response to FSL-1, a TLR2/6 ligand, and lipopolysaccharide, which interacts with CD14 to initiate immune responses, as determined by the reduced secretion of IL-23 and CCL2, respectively. Glucocorticoids weakened the 7αOHChol-induced production of CCL2 and CCR5 ligands, which was accompanied by decreased migration of monocytic cells and CCR5-expressing Jurkat T cells. Treatment with Dex or Pdn also reduced the phosphorylation of the Akt-1 Src, ERK1/2, and p65 subunits. These results indicate that both Dex and Pdn impair the expression of PRRs and their downstream products, chemokine production, and phosphorylation of signaling molecules. Collectively, glucocorticoids suppress the innate immune response and activation of monocytic cells to an inflammatory phenotype enhanced or induced by 7αOHChol, which may contribute to the anti-inflammatory effects in hypercholesterolemic conditions.

  • PDF

SDN based LTE/EPC Networks Model and Experiment for Mobility Management (이동성 관리를 위한 SDN 기반 LTE/EPC 네트워크 모델 제안 및 실험)

  • Lim, Hyun-Kyo;Heo, Joo-Seong;Kim, Ju-Bong;Han, Youn-Hee
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2017.04a
    • /
    • pp.113-116
    • /
    • 2017
  • 최근 급격히 증가한 모바일 기기와 Over The Top (OTT) 서비스의 활성화로 인하여 CMM 기반의 LTE/EPC 네트워크에 과다한 데이터/제어 트래픽의 수용이 힘들어지는 문제가 중요 이슈로 부각되고 있다. 이를 해결하기 위하여 IETF는 Distributed Mobility Management (DMM) 기반의 이동성 관리 방안을 제안하였다. 하지만 DMM 기술은 중앙의 트래픽 부하 분산에 초점을 두고 있어 단말의 이동과 관련하여 발생하는 과다한 제어 트래픽 수용에 관한 문제를 해결하기에는 부족하다. 따라서 본 논문에서는 이러한 문제를 해결하기 위하여 SDN 기반으로 CMM과 DMM을 함께 이용하는 HMM (Hybrid Mobility Management) LTE/ECP 네트워크 모델을 제시한다. 또한 HMM 기반의 LTE/EPC 네트워크 모델은 CMM 및 DMM 기법의 선택을 위해 단말의 이동성과 PDN 연결의 개수를 고려한 선택방안을 제시하며, 제안하는 HMM 기반의 LTE/EPC 네트워크 구조에서의 데이터 트래픽 부하량과 단말의 이동성과 PDN 연결 개수에 따라 제어 트래픽의 양을 비교하는 그래프를 제시하며 제안하는 네트워크 모델의 타당성을 입증한다.

The Tensile Properties for Powder-driven-nail Connections for Japanese Larch Small Round Timber

  • Shim, Kug-Bo;Lee, Do-Sik
    • Journal of the Korean Wood Science and Technology
    • /
    • v.33 no.2 s.130
    • /
    • pp.8-16
    • /
    • 2005
  • In an effort to encourage the development of value added engineered applications for small diameter round timber, research is being conducted to develop and verify design guidelines for connections with specific application to round timbers. The objective of this research is to provide potential users with a number of viable connection options applicable in the fabrication of engineered, round wood structural components and systems. Target uses include trusses, built up flange beams and space frames. This paper presents information on a mortised steel plate connection fabricated using powder driven nails in 6 cm diameter Japanese Larch. The design load for PDN connections are around 1.3 kN per nail with strip and 0.8 kN per nail without stripe. The design model for PDN connectors could be chosen by the number of nails. If the number of nails are more than the critical number between nail bearing and wood failure, the wood failure model could be the way to design the structure safely. The wood failure model needs to be studied more but the model could be the tensile and cleavage mixed failure model.

Effect of Lipopolysaccharide (LPS) on Mouse Model of Steroid-Induced Avascular Necrosis in the Femoral Head (ANFH)

  • Ryoo, Soyoon;Lee, Sukha;Jo, Seunghyun;Lee, Siyoung;Kwak, Areum;Kim, Eunsom;Lee, Jongho;Hong, Jaewoo;Jhun, Hyunjhung;Lee, Youngmin;Sobti, Anshul Shyam;Kim, Soohyun;Oh, Kwang-Jun
    • Journal of Microbiology and Biotechnology
    • /
    • v.24 no.3
    • /
    • pp.394-400
    • /
    • 2014
  • Avascular necrosis of the femoral head (ANFH) is commonly observed in patients treated with excessive glucocorticoid (GC). Single administration of lipopolysaccharide (LPS) has shown to induce immune stimulatory factors. However, the effect of repeated administration of LPS on GC-induced ANFH has not been studied. Thus, the purpose of this study was (i) to examine the cytokine profile induced by repeated LPS administrations and (ii) to test the effect of repeated LPS treatments on GC-induced ANFH. A mouse necrosis model of ANFH was designed by chronic GC administration with co-treatment of LPS. Mice body weights in the LPS/prednisolone (PDN) co-treated group were lower than that of the untreated control group, but spleen weights were greater than the control group. The levels of IL-6, $TNF{\alpha}$, and IL-33 in the liver and spleen of the LPS/PDN group were lower than the untreated control group, whereas $TNF{\alpha}$ level in the femoral head of the LPS/PDN group increased. Collectively, the effect of repeated LPS on the pathogenesis of GC-induced ANFH was associated with the $TNF{\alpha}$ level in the femoral head, but the pathogenesis did not correspond to cytokine levels in immune tissues.

On the Effects of Electric Noise due to the Slits in the PCB Power-Distribution Network with the Differential-Mode Signaling using a Rigorous Modal Analysis Method (정확한 모드해석방법을 이용한 차동모드 급전을 가지는 PCB 전력공급회로에서의 슬릿에 의한 전기잡음의 영향 연구)

  • Kahng, Sung-Tek
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.56 no.11
    • /
    • pp.1988-1991
    • /
    • 2007
  • This study investigates the performances of the signaling techniques including differential signals for the power-distribution network(PDN)s with and without the slit, using a rigorous evaluation method 'Modal Analysis', validated by being compared to the FDTD simulation up to 5 GHz.

Overview of 3-D IC Design Technologies for Signal Integrity (SI) and Power Integrity (PI) of a TSV-Based 3D IC

  • Kim, Joohee;Kim, Joungho
    • The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.24 no.2
    • /
    • pp.3-14
    • /
    • 2013
  • In this paper, key design issues and considerations for Signal Integrity(SI) and Power Integrity(PI) of a TSV-based 3D IC are introduced. For the signal integrity and power integrity of a TSV-based 3-D IC channel, analytical modeling and analysis results of a TSV-based 3-D channel and power delivery network (PDN) are presented. In addition, various design techniques and solutions which are to improve the electrical performance of a 3-D IC are investigated.