• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.265-266
• /
• 2013

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.274.2-274.2
• /
• 2013

We described a simple and efficient fabrication method for generating microfluidic channels with a circular-cross sectional geometry by exploiting the reflow phenomenon of a thick positive photoresist. Initial rectangular shaped positive photoresist micropatterns on a silicon wafer, which were fabricated by a conventional photolithography process, were converted into a half-circular shape by tuning the temperature to around $105^{\circ}C$. Through optimization of the reflow conditions, we could obtain a perfect circular micropattern of the positive photoresist, and control the diameter in a range from 100 to 400 ${\mu}m$. The resultant convex half-circular photoresist was used as a template for fabricating a concave polydimethylsiloxane (PDMS) through a replica molding process, and a circular PDMS microchannel was produced by bonding two half-circular PDMS layers. A variety of channel dimensions and patterns can be easily prepared, including straight, S-curve, X-, Y-, and T-shapes to mimic an in vivo vascular network. To inform an endothelial cell layer, we cultured primary human umbilical vein endothelial cells (HUVECs) inside circular PDMS microchannels, and demonstrated successful cell adhesion, proliferation, and alignment along the channel.

• KSBB Journal
• /
• 제21권4호
• /
• pp.273-278
• /
• 2006

박테리아 패터닝을 위한 혼성 아가로즈젤 마이크로 스탬프는 PDMS 몰드를 이용한 replica moding 공정을 이용하여 제작하였다. 완성된 스탬프를 박테리아를 잉크로 사용한 후, $50{\mu}m$ 원 모양을 가지는 2차원 박테리아 어레이를 구현할 수 있었다. 또한, 상기 방법을 통하여 실험 목적에 적합한 다양한 모양을 가지는 패턴을 쉽게 만들 수 있다. 패터닝된 박테리아의 형광 세기는 스팟과 주변간에 매우 높은 대조비를 이루며, 각각의 스팟 및 스팟간의 형광 세기가 매우 균일함을 보여 프린팅 시 매우 균일한 패턴을 얻을 수 있었다. 박테리아 패터닝을 할 경우 큰 문제점인 낮은 젖음성과 미끄럽고 작은 아가로즈젤 마이크로 스탬프를 취급의 어려움을 본 연구에서 제안한 혼성 아가로즈젤 마이크로 스탬프를 이용하여 해결할 수 있었다. 상기 방법의 가장 큰 장점은 세포를 이용한 패터닝의 경우 세포의 활성을 유지시키는 것인데 다량의 수분을 포함하는 아가로즈젤을 사용할 경우 세포의 활성을 유지시키면서 패턴을 구현할 수 있으므로 매우 중요한 기술로 생각된다. 본 연구에서 제안된 방법은 매우 재현성이 높으며, 편리하고, 빠르게 구현할 수 있어서 미생물 생태학, 세포와 표면간의 상호작용 그리고 세포를 바탕으로 하는 스크리닝 시스템에 활용 되어 질것으로 기대된다.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1429-1434
• /
• 2004

Immunoassay is one of the important analytical methods for clinical diagnoses and biochemical studies, but needs a long time, troublesome procedures and expensive reagents. In this study, therefore, we propose the micro filter chip with microbeads for immunoassay, which has pillar structures. The advantage of the proposed micro filter chip is to use simple fabrication process and cheap materials. The mold was made by the photolithography technique with Si wafer and negative photoresist SU-8. The replica was made of PDMS, bonded on the pyrex glass. The micro filter chip consists of inlet channel, filter chamber and outlet channel. HBV (Hepatitius B virus) monoclonal antibody (Ag1) labeled with biotin were immobilized onto streptavidin coated beads of 30∼50 $\mu$m size. Fluorescein isothiocyanate (FITC)-labeled HBV monoclonal antibody (Ag8) was used to detect HBsAg (Hebatitis B virus surface Antigen), and fluorescence intensity was monitored by epi-fluorescence microscope. In this study, the immune response of less than 30 min was obtained with with the use of 100 $m\ell$ of sample.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1168-1170
• /
• 2005

Nanoimprint Lithography(NIL) has increasingly been recognized as a key manufacturing technology for nanosized feature. One of the most important task for nanoimprint lithography is to provide the imprinting stamp with low price. The Stamp fabricated with Si based material by e-beam lithography, RIE is extremely expensive and its throughput is very limited and PDMS replica is too soft to hold high imprinting pressure.(>5atm) In this study, we present the imprinting stamp which can be easily replicated from original mold and is based on PVC film. Replication of original Si mold to PVC film was done by Hot embossing technique, ($120^{\circ}C$ of Temperature, 20 atm applied) As small as 100nm patterns were successfully transferred into PVC film. The size of stamp was up to 100mm in diameter.

• 마이크로전자및패키징학회지
• /
• 제21권1호
• /
• pp.25-29
• /
• 2014

본 연구에서는 기존의 PCB의 한계를 극복할 수 있는 광 PCB에 대한 연구를 수행하였으며, 고효율 수동정렬을 위한 플러거블 렌즈구조를 제안하였다. 제안된 구조는 광 도파로 수동 정렬시 발생할 수 있는 렌즈와 도파로 간의 정렬 오차를 개선하고자 도파로와 렌즈를 합한 형태이다. 또한 탈착에 의해 손상되는 렌즈표면을 보호하기 위한 보호벽 형태를 지님으로써, 고효율의 수동정렬이 가능하게 하였다. 최적화 시뮬레이션을 통하여 구조를 설계하였고, 반복적 포토 리소그래피와 열적 리플로우 공정을 통하여 플러거블 렌즈 구조 제작을 위한 공정 연구를 수행하였다. 렌즈일체형 플러거블 접속구조의 광도파로를 PDMS복제공정으로 제작된 mold를 이용하여 임프린트 공정을 통해 제작하였다. 따라서 본 논문에서는 수동정렬이 가능한 광PCB접속용 플러거블 렌즈 구조의 제작이 가능함을 확인하였다.

• 한국광학회지
• /
• 제16권2호
• /
• pp.113-120
• /
• 2005

LCD-BLU(liquid crystal device-back light unit)에 사용되는 도광판의 미세 산란패턴을 만드는 새로운 방법으로서, 실리콘 웨이퍼의 비등방 식각에 의해 자연적으로 형성되는 3차원 결정면 구조를 이용하는 방법을 제안하였다. 실리콘 3차원 결정면을 갖는 도광판과 프리즘 시트의 원판을 설계 및 제작하였고, casting 공정을 통해 PDMS 재질로 복제된 도광판을 제작하여 특성을 분석하였다. 측정 결과, 기존 인쇄형 도광판에 비해 실리콘피라미드 패턴의 도광판이 $10\%$ 증가된 정면 휘도 효율을 가질 수 있음을 실험적으로 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.479-482
• /
• 2002

Riblets with longitudinal grooves along the streamwise direction have been used as an effective flow control technique for drag reduction. A flexible micro-riblet with v-grooves of peak-to-peak spacing of $300{\mu}m$ was made using a MEMS fabrication process of PDMS replica. The flexible micro-riblet was attached on the whole surface of a NACA0012 airfoil with which grooves are aligned with the streamwise direction. The riblet surface reduces drag coefficient about $7.9{\%}\;at\;U_o=3.3m/s$, however, it increases drag about $8{\%}\;at\;U_o=7.0m/s$, compared with the smooth airfoil without riblets. The near wake has been investigated experimentally far the cases of drag reduction ($U_o\;=\;3.3 m/s$) and drag increase ($U_o\;=\;7 m/s$). Five hundred instantaneous velocity fields were measured for each experimental condition using the cross-correlation PIV velocity field measurement technique. The instantaneous velocity fields were ensemble averaged to get spatial distribution of turbulent statistics such as turbulent kinetic energy. The experimental results were compared with those of a smooth airfoil under the same flow condition. The micro-riblet surface influences the near wake flow structure largely, especially in the region near the body surface

• Macromolecular Research
• /
• 제17권3호
• /
• pp.192-196
• /
• 2009

Recently, the multi-screening of target materials has been made possible by the development of the surface plasmon resonance (SPR) imaging method. To adapt this method to biochemical analysis, the multi-patterning technology of protein microarrays is required. Among the different methods of fabricating protein microarrays, the microfluidic platform was selected due to its various advantages over other techniques. Microfluidic devices were designed and fabricated with polydimethylsiloxane (PDMS) by the replica molding method. These devices were designed to operate using only capillary force, without the need for additional flow control equipment. With these devices, multiple protein-patterned sensor surfaces were made, to support the two-dimensional detection of various protein-protein interactions with SPR. The fabrication technique of protein microarrays can be applied not only to SPR imaging, but also to other biochemical analyses.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.1-5
• /
• 2022

We presented a micro hemi-sphere structure flexible film to improve the external quantum efficiency (EQE) in OLEDs. The micro hemi-sphere flexible film was fabricated with breath figure (BF) method and replica process. At 45 mg/mL of concentration, the size of the hemi-spheres was approximately 6.2 ㎛ were obtained which are the most circular shape. So, it was possible to yield the best performance with an improvement of 33 % in the EQE and the widest viewing angle ranging from 0° to 70°. As a result, the hemi-sphere film's size and distribution seem to play important roles in enhancing the EQE in OLEDs. Furthermore, the flexible hemi-sphere film based on polymeric materials could offer an effective, large-scale, mass-produced product and a simple process and approach to achieve high efficiency in flexible OLEDs.