• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.322-328
• /
• 2009

Emulsion polymerization of octamethylcyclotetrasiloxane (OMCTS) was conducted under ultrasonic irradiation. Two sources of ultrasound with different intensities and frequencies of 20 KHz and 40 KHz were used for horn and bath type reactor, respectively. A combined process of horn and bath was also investigated. The effectiveness of the reaction systems was investigated by measuring conversion as well as intrinsic viscosity of the products. The influence of reaction temperature and sonication time on the progress of sonochemical polymerization was examined. It was found that conversion of greater than 80% and high viscosity were achieved within a few minutes of sonication in a horn type reactor, however, conversion and viscosity showed maximum values depending upon the sonication time. In a bath type reactor where a relatively weak intensity was maintained, longer duration time of more than one hour of sonication was required to reach a high level of conversion and viscosity. Compared with the horn type system, the conversion and viscosity in the bath type reactor were increased along with the sonication time. When the polymerization was carried out in a combined system of horn and bath, the evolution of conversion and molecular weight was quite different from the other cases. For the given geometry of reaction system, acoustic analysis using a commercial software was carried out and the results were correlated with experimental observation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.265-273
• /
• 2012

The business environment is changing rapidly because of the global crisis. In order to survive and enhance competitiveness in the global market, global manufacturing companies are trying to overcome the crisis through the convergence of production infrastructure and IT technology. The importance of systems to support the integration of manufacturing processes, collaboration in product development, and information integration of providers and producers is therefore increasing. In this paper, research is conducted on the design and implementation of a collaboration system to support a power-boat manufacturing company in this situation of increased demand for collaboration and information integration. The system was designed through product-structure and production-process analysis, support product data management, and enterprise contents management. The company involved in the power-boat development project is expected to show an improvement in productivity through the integrated management of information and collaboration provided by this system.

• Proceedings of the CALSEC Conference
• /
• 1998.10b
• /
• pp.585-594
• /
• 1998

이미 전자상거래(EC)가 시간적ㆍ공간적 제약을 극복하고 국경을 초월한 새로운 교역시장 (Cyber Market)으로 등장하고 있으며 세계 자동차 산업은 표준부품의 공동개발 및 조달을 통해 중복투자 방지, 신차개발기간 단축 등 전략적 제휴를 통한 공조ㆍ공생체계 구축을 경쟁적으로 추진하고 있으나 국내 자동차업계는 제품개발, 부품조달, 판매 및 A/S 등 모든 부문을 독자적으로 해결함으로써 경쟁력 제고에 역행하는 경향이 있다. 또한 자동차 선진국과는 달리 국제 경쟁력 강화를 위한 CALS/EC 정보 기반 기술의 실질적인 활용이 미흡한 실정이다. 이러한 현실을 개선하기 위해 최근에 자동차공업협회(KAMA)와 현대, 대우, 기아 자동차 3사는 자동차 산업 CALS 추진 모델(Autopia)의 구축을 추진하고 있다. 추진 내용은 자동차 산업의 전체 Life-Cycle인 제품기획 단계부터 설계, 생산, 구매/조달, 고객지원 단계등 전 분야를 3개 부문(신차개발 프로세스, 구매조달 프로세스, 고객지원 서비스)으로 구분되어 있다. 신차개발 프로세스 부문은 차세대 PDM을 통하여 제품개발 사이클 단축을 추구하며 STEP을 통한 범용적 설계정보 교환 체계 구현이 기반이 된다. 또한 업무 흐름의 불투명성으로 인한 업무의 불균형 현상 타파와 설계 변경의 효율적 대응을 위하여 Workflow Management가 동시공학에 바탕을 두고 도입 적용되어야 한다. CAD 데이터를 비롯한 방대한 데이터의 효율적 관리를 위해서는 각 프로세스별로 독립된 정보를 체계적으로 관리할 수 있는 통합 환경(Integrated Data Environment)을 구성하여 각 프로세스에 걸쳐 데이터의 처리효율을 증대하여야 한다. 신차개발 부문의 핵심 기술이면서도 현업 적용이 초기 단계인 Digital Mockup과 Virtual Reality의 적용을 위해서는 3D 모델링이 기본 설계 방법으로 적용되어야 하며 이를 통한 어셈블리 및 부품구조의 관리가 이루어져야 한다. 구매조달 프로세스 부문은 자동차 업계의 공통 EDI/EC 네트워크 구축을 통한 경제적인 인프라 구조와 함께 부품 조달 체계의 간소화를 추구함으로써 자동차 산업의 대외 경쟁력 강화가 이루어 질 수 있다. 공개구매 시스템의 구축을 통하여 완성차별로 전속 계열화된 수직적인 부품조달 체계와 업체간 정보공유의 폐쇄성을 제거할 수 있고 완전 경쟁에 의한 우량 협력업체 발굴 기회의 확대가 용이하다. 이를 통하여 궁극적으로는 Global Vendor망의 구축이 실현될 것이다. 종합물류 시스템이 구현되면 판매는 경쟁체제, 물류는 공동화가 됨으로써 국가적으로 물류 비용의 절감이 엄청날 것으로 예상된다. 전국에 산재되어 있는 1,000여개의 대리점과 7,000여개의 정비업소를 대상으로 한 정비부품 EDI/EC 시스템이 구축되면 고객 서비스의 효율 향상과 함께 정비업소의 물류 및 재고 비용의 감소, 조달 속도의 향상, 조달 업무의 간소화 등의 효과를 보게 될 것이다. 고객지원 서비스는 정비정보 시스템, 산업정보 시스템, 쇼핑몰 시스템, 등록대행 시스템등을 통하여 일반 국민들이 피부로 느낄 수 있는 시스템으로 구축 되어야 할 것이다.

• KSBB Journal
• /
• v.23 no.3
• /
• pp.263-270
• /
• 2008

A poly-(dimethylsiloxane) (PDMS) surface modified by the successive deposition of the polyelectrolytes, poly-(allylamine hydrochloride) (PAH), poly-(diallyldimethylammoniumchloride) (PDAC), poly-(4-ammonium styrenesulfonic acid) (PSS), and poly-(acrylic acid) (PAA), was presented for the application of selective cell immobilization. It is formed via electrostatic attraction between adjacent layers of opposite charge. The modified PDMS surface was examined using static contact angle measurements and fourier transform infrared (FT-IR) spectrophotometer. The wettability of the PDMS surface could be easily controlled and functionalized to be biocompatible through regulation of layer numbers. The modified PDMS surface provides appropriate environment for adhesion to cells, which is essential technology for cell patterning with high yield and viability in the patterning process. This method is reproducible, convenient, and rapid. It could be applied to the fabrication of biological sensing, patterning, microelectronics devices, screening system, and study of cell-surface interaction.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.71-80
• /
• 2016

PERT(Project Evaluation and Review Technique) is typical method in order to probabilistically establish the schedule plan for large scale complex project or mega project. PERT technique is impossible to estimate relationship of each activity probabilistically when there are overlapping relationships because it is limited to Finish-to-Start(FS) relationship. In order to overcome this kind of limitation of PERT technique, PLET(Probabilistic Linkage Evaluation Technique) has been suggested to probabilistically estimate project duration for various overlapping relationships for each activity. However, estimating project duration by PLET technique only considers uncertainty of relationship between activities and not activity time, thus it is not the perfect duration estimating method. The main objective of this research is to propose the integration model of PERT and PLET and verify its probabilistic validity. By verifying application of time calculation method of integration model in practical case, this research will suggest probabilistic project duration estimating method in schedule plan of high-risk construction industry.

• Membrane Journal
• /
• v.19 no.1
• /
• pp.83-88
• /
• 2009

Poly(ether block amide) (PEBA)/poly(dimethyl-siloxane) (PDMS) blend membranes (PEBA : PDMS = 5 : 2, 6 : 1 wt%) were prepared through the solution-casting and phase inversion process in order to demonstrate their superior performance in carbon dioxide separation. PDMS and PEBA (4033) were also prepared by the same method using n-butanol as a solvent. To study the gas permeation properties, the membranes were characterized with SEM and tested with carbon dioxide and nitrogen at $35^{\circ}C$ and pressure ranging from 3 to 5 atm. In conclusion, PEBA/PDMS blend membranes were shown to have selectivity for $CO_2/N_2$ separation that is 4 to 5 magnitudes greater than that of PDMS membrane at 3 atm.

• Membrane Journal
• /
• v.25 no.4
• /
• pp.352-357
• /
• 2015

To determine the pervaporation separation characteristics of 1-butanol/water mixtures, PEI/PDMS hollow fiber membrane module commercialized by Airrane Co. was subjected to both lab and pilot tests. The 1% 1-butanol of 1-butanol/water feed mixture was used. The flux of $133g/m^2hr$ and separation factor of 23.4 at $30^{\circ}C$ were obtained whereas the $505g/m^2hr$ and 5.1 were measured at $50^{\circ}C$. When compared with the performance of the hollow fiber PDMS membrane by Nagasep Co., the higher flux of $10{\sim}20g/m^2hr$ was obtained by the module of Airrane Co. In order to realized the durability of Airrane Co. module, the long-term test of 35 days has been conducted and as a result, the flux $510{\sim}520g/m^2hr$ and separation factor 20~25 were maintained with the initial values.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.54-64
• /
• 2011

Almost 40 years have been passed since the CPM was introduced to the construction industry in Korea. However most of construction projects in Korea do not prepare the CPM schedule neither operate it after established manually, as well as still depend on the Bar-chart schedule only. One of these reasons is because the CPM schedule does not reflect the site works realistically, it makes so difficult to recognize the actual progress clearly in visual format, and it is impossible to integrate and manage the time and cost oriented work progresses effectively. This paper proposes new concept of progress management that is able to integrate and manage the time oriented schedule progress and earned value oriented cost progress while maintaining the merits of CPM although the CPM schedule summarized automatically within a schedule hierarchy by the BDM that is a new CPM technique. We expect that this concept could make the applications of CPM technique to the domestic construction industry popular and help the advancement of the construction management in Korea as well.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.673-677
• /
• 2016

Recently, engineering applications have started to adopt solutions inspired by nature. The peculiar adhesive properties of gecko skin are an example, as they allow the animal to move freely on vertical walls and even on ceilings. The high adhesive forces between gecko feet and walls are due to the hierarchical microscopical structure of the skin. In this study, the effect of metal coatings on the adhesive strength of synthetic, hierarchically structured, dry adhesives was investigated. Synthetic dry adhesives were fabricated using PDMS micro-molds prepared by photolithography. Metal coatings on synthetic dry adhesives were formed by plasma sputtering. Adhesive strength was measured by pure shear tests. The highest adhesion strengths were found with coatings composed of 4 nm thick layers of Indium, 8 nm thick layers of Zinc and 6 nm thick layers of Gold, respectively.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.71-76
• /
• 2012

Biofouling by marine organisms such as algae and barnacles causes lots of significant problems in marine systems such as a rise of the maintenance-repair cost for the ship and the marine structures. In this work, a fluoropolymer, perfluoropolyether (PFPE), was applied as an anti-biofouling coating material that prevents the adhesion of marine organisms and facilitates the removal of them. Water contact angles of various surfaces were tested to examine the hydrophobicity of the PFPE-modified surface. The PFPE-modified surface showed the water contact angle of $64.5^{\circ}$ which is a remarkable rise from $46.7^{\circ}$ of amine-treated surface. When the substrate was treated with PFPE, the adhesion on the of the barnacle and other marine organisms were repressed around 15% by the enhanced hydrophobicity. In addition, the removal the of the adhered marine organisms were better comparing to that of the surface prepared by PDMS. Surfaces of the substrate treated by PFPE were characterized through physical and chemical methods to analyze the biofouling results. Degree of biomolecular adhesion to the substrate was quantified by the measurement the fluorescence intensity of marine organisms dyed with green fluorescence. PFPE is expected to be applicable not only to anti-biofouling systems but also to medical devices where the prevention of protein adhesion is required.