• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1692-1701
• /
• 2001

This study describes the combustion characteristics under various condition of air excess ratio and ignition timing in a 2-valve SI optically accessible engine with swirl control valve(SCV). It adapted three different types of SCV(open ratio 72.5%, 78%, 59%) to strengthen a swirl flow. Pressure data were acquired using pressure sensor to investigate the effect of swirl flow on combustion, and from these pressure data, IMEP(indicated mean effective pressure) and MFB(mass fraction burnt) were calculated to explain burn rate and flame speed. From acquired flame images, we inspected the flame propagation direction, flame area, and flame centroid. Flame propagation direction showed different tendency between with/without SCV, and flame area with SCV was faster and larger than that of conventional engine. Finally, the representative flame images at each crank angle were acquired by PDF method to verify flame growth process. It is found that strengthened swirl flow is more beneficial for faster and stable combustion.

• 한국통신학회논문지
• /
• 제25권5B호
• /
• pp.797-808
• /
• 2000

이 논문에서는 강우 페이딩 환경하에서 Ka 밴드 위성을 사용하는 비대칭 8PSK 트랠리스 부호(Trellis-Coded Asymmetric 8PSK : TC-A8PSK)의 BER 상한을 제시한다. 대수정규분포 강우감쇠 모델을 이용하여 강우 페이딩 PDF를 새롭게 유도하고 Crane 모델의 강우강도 데이터에 근거하여 강우 페이딩 파라미터를 계산한다. 나아가 TCM 상태수와 CSI 유무에 따른 TC-A8PSK 시스템의 BER 상한을 각각 분석하고 그 성능을 비교한다. 과거 Divsalar와 Simon[9]에 의해 라이시안 페이딩 채널에서 2 상태 TCM 시스템의 BER 상한이 분석된 바 있으나 강우 페이딩 채널에서 TCM 시스템의 BER 상한을 분석한 것은 이 논문이 처음이다. 최종적으로 강우 페이딩 채널에서 TC-A8PSK 위성시스템의 BER 상한에 지배적인 영향을 미치는 요소는 사용주파수, 강우강도, 앙각, 신호전력대 잡음전력비, 비대칭 성좌각, 그리고 CSI 6가지로 요약 할 수 있다.

• 한국통신학회논문지
• /
• 제26권11B호
• /
• pp.1546-1555
• /
• 2001

일반적으로 CDMA 시스템의 해석에서 시스템의 대역폭에 관계없이 한 칩 구간 내에 일정한 평균 전력을 갖는 한 개의 다중 경로 성분만을 고려하고 있다. 그러나 본 논문에서는 고정된 채널 모델에서 시스템의 대역폭에 따라 한 칩 구간 내의 다중 경로 성분들의 수를 달리하고, 이 다중경로 성분들에 자기 상관 함수의 기울기와 상대적인 위상을 고려하여 페이딩의 영향을 해석하였다. 이러한 페이딩이 시스템에 미치는 영향을 알아보기 위해 출력 신호의 통계적 분포를 나타내는 출력 신호의 확률 밀도 함수를 구하였다, 그리고 이 출력 신호에 대한 조건부 에러 확률을 이용하여 사용자 수에 대한 평균 에러 확률을 유도하였다. 광대역 다중 경로 채널 모델로 실측 채널 모델인 JTC 채널 모델을 사용하고, 시스템의 성능 개선을 위해 MRC 레이크 수신기를 사용하였다. 그리고 W-CDMA 시스템의 대역폭에 따른 성능을 공정하게 비교하기 위해 사용자 수를 성능비교의 파라미터로 설정하고 동일한 주파수 대역폭 내에서 hybrid FDMA/CDMA 시스템을 가정하여 비교하였다. 모의 실험의 결과로부터 이용 가능한 많은 다중 경로 성분이 존재할 때 고정된 채널 모델에서 시스템의 분해능이 좋을수록 성능이 우수함을 알 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권9호
• /
• pp.3016-3033
• /
• 2014

The downlink performance of distributed antenna systems (DAS) with antennas selection is investigated in Rayleigh fading multicell environment, and the corresponding system capacity and bit error rate (BER) analysis are presented. Based on the moment generating function, the probability density function (PDF) and cumulative distribution function (CDF) of the effective signal to interference plus noise ratio (SINR) of the system are first derived, respectively. Then, with the available CDF and PDF, the accurate closed-form expressions of average channel capacity and average BER are further derived for exact performance evaluation. To simplify the expression, a simple closed-form approximate expression of average channel capacity is obtained by means of Taylor series expansion, with the performance results close to the accurate expression. Besides, the system outage capacity is analyzed, and an accurate closed-form expression of outage capacity probability is derived. These theoretical expressions can provide good performance evaluation for DAS downlink. It can be shown by simulation that the theoretical analysis and simulation are consistent, and DAS with antenna selection outperforms that with conventional blanket transmission. Moreover, the system performance can be effectively improved as the number of receive antennas increases.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.91-94
• /
• 2000

In this paper, the performance of the W-CDMA system with smart antenna is investigated. The realistic wideband channel is assumed, one of which is JTC(Joint Technique Committee) channel model. It is also assumed that multipaths are clustered. The beamforming-RAKE receiver structure of W-CDMA system is proposed, whose performance is analyzed on the assumption of perfect channel estimation. The probability density function (pdf) of SINR(Signal to Interference and Noise Ratio) for different number of antennas and users is presented, and the BER(Bit Error Rate) is presented based on that. As a result, the performance of the W-CDMA system with smart antenna in the realistic wideband channel has been considerably improved.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.115-123
• /
• 2001

This study describes the combustion characteristics under various condition of air excess ratio and ignition timing in a 2-valve gasoline optically accessible engine with swirl control valve(SCV). It adapted three different types of SCA(open ration 72.5%, 78%, 89%) to strengthen a swirl flow. Pressure data were acquired using pressure sensor to investigate the effect of swirl flow on combustion, and from these pressure data, IMEP(indicated mean effective pressure) and MFB(mass fraction burnt)were calculated to explain burn rate and flame speed. From acquired flame images, inspected the flame propagation direction, flame area, and flame centroid, Flame propagation direction was shown different tendency between with/without SCV, and flame area with SCV was faster and larger than that of conventional engine. Finally, the representative flame image at each crank angle were acquired by PDF method to verify flame growth process. It is found that strengthened swirl flow is more beneficial for faster and stable combustion.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 1부
• /
• pp.16-19
• /
• 2010

본 논문에서는 송신국과 릴레이에서의 오류확률을 고려한 복호 후 전달 릴레이(DF: Decoded and Forward) 시스템에 대하여 정확한 비트 오류율 분석을 수행하고자 한다. 성능 분석에서는 복호 후 전달 릴레이 시스템의 노드들 간의 채널을 상호 독립적인 레일리 페이딩 채널로 가정하고 변조 방식으로는 BPSK(Binary Phase Shift Keying)를 사용한다. 우선, 정확한 평균 오류율 분석을 위하여 송신국-수신국 링크와 릴레이-수신국 링크 결합시 릴레이노드의 복호결과 오류 유무에 따라 수신 SNR(Signal to Noise Ratio)을 각각 유도하고 복호결과가 오류일 때 수신 SNR이 양수인 경우와 음수인 경우를 고려하여 그에 대한 PDF(Probability Density Function)를 계산한다. 그리고 각각의 경우에 대한 평균 오류율을 유도하였다. 또한 모의실험 결과와의 비교를 통하여 제안된 성능 분석 기법의 정확성을 검증하였다.

• 한국인쇄학회지
• /
• 제22권1호
• /
• pp.65-74
• /
• 2004

This study analyzed the main bodies, sizes of litters, spaces between letters, Words, lines, length of lines, sizes of main body and margin, Position of the main bodies of PDF(Portable Document Format) in high schools and "the criteria of reading system for the textbooks" which was suggested by the Department of Education and Provided some suggestions for the improvement. First, it is judged that spaces of the main body of textbooks should be shrunken to make the ratio of 50:50 between the main body and space margin. Second, it is judged that the main body should be placed in the center of text page. Third, the results of the above findings showed that it would be difficult to deal with the task of deciding space and position or the main body and marginal space in a form of single project, because there are many variables involved and psychologically complicated elements which can not be measured objectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.667-670
• /
• 2001

For major structural components periodic inspections and integrity assessments are needed for the safety. However, many flaws are undetectable because sampling inspection is carried out during in-service inspection. Probabilistic integrity assessment is applied to take into consideration of uncertainty and variance of input parameters arise due to material properties and undetectable cracks. This paper describes a Probabilistic Fracture Mechanics(PEM) analysis based on the Monte Carlo(MC) algorithms. Taking a number of sampling data of probabilistic variables such as fracture toughness value, crack depth and aspect ratio of an initial surface crack, a MC simulation of failure judgement of samples is performed. For the verification of this analysis, a comparison study of th PFM analysis using a commercial code, mathematical method is carried out and a good agreement was observed between those results.

• 한국해양공학회지
• /
• 제13권3B호
• /
• pp.22-28
• /
• 1999

The purpose of this study is to investigate the NOx emission of turbulent diffusion flame formed in the after burner, which is located on the waste gas coming out from the test furnace. Three types of flame was tested and each of which was changed by adequate equivalence ratio. It is necessary to study more about NOx reduction effect in the after burner system.