• Korean Journal of Microbiology
• /
• v.44 no.2
• /
• pp.130-134
• /
• 2008

Modern automated culture systems have increased the isolation rate of microorganisms and shortened the time to detection, reducing experimental errors in diagnosis of infecting agents. BacT/ALERT 3D system is based on the colorimetric detection of $CO_2$ produced by the growing microorganisms. In order to evaluate the efficiency of the detection system, sterility test were performed using 6 bacteria. With standard aerobic and anaerobic bottles containing the liquid media, both three aerobic bacteria (P. aeruginosa, M. luteus, B. subtilis) and a facultative bacterium S. aureus were detected up to 1 CFU in 31.44 hr. In addition, growth of anaerobic C. sporogenes was recognized up to 1 CFU in 15.96 hr. The slowly growing bacteria P. acnes was detected up to 10,000 CFU in 129.36 hr. In comparison with conventional culture method, BacT/ALERT 3D automated culture system was more sensitive and saved detection time up to$2\sim10$ hr. Therefore, this automated culture system enables to efficiently detect bacteria in clinical samples and biological medicines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.527-534
• /
• 2002

In this paper, efficiency in the acquisition of the PN code of the DS/CDMA system was analyzed by using the Nakagami-m probability density function that can model diverse fading channels. The system considers the fading environment that inevitably exists in the mobile communications channel environment. To analyze the efficiency of the system, the equations related to detection probability PD and false alarm probability PFA required for the acquisition of the PN code were induced by using the Nakagami-m probability density function. They were verified through simulation. For the DS/CDMA system an adaptive serial search technique was applied to acquire the PN code. To correct phase error, the equations related to detection probability PD and false alarm probability PFA that influence the time to acquire codes were induced after adding the PLL to each branch of the Rake Receiver. By using an induced equation, detection probability PD and false alarm probability PFA were verified through simulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.4
• /
• pp.319-324
• /
• 2011

This paper dealt with a partial discharge (PD) detection method for insulation diagnosis in cast-resin transformers. To detect PD pulse, a planar-capacitive probe was designed and fabricated. The probe has no insulation problem and can be installed on cast-resin transformers even in operation since it does not connect with high voltage conductor. The PD measurement system consists of the capacitive probe, a coupling network of 100 [kHz] low-cutoff frequency, and an amplifier with a gain of 40 [dB] and a frequency bandwidth of 500 [Hz]~45 [MHz]. A plane-needle and a plane-plane electrode system were fabricated to simulate insulation defects in a cast-resin transformer. Sensitivity of the PD measurement system, which is evaluated by a standard calibrator was 0.35 [mV/pC] for positive and 0.45 [mV/pC] for negative, respectively. The PD detection by the capacitive probe was less sensitive than that by a coupling capacitor according to IEC 60270, but we could analyze the magnitude and the phase distribution of PD pulse.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1977-1983
• /
• 2009

This paper described partial discharge(PD) patterns depending on types of insulation defects in CNCO-W cable(Concentric Neutral Closs-linked Polyethylene Insulated Polyolefin-Water Proof Sheathed Power Cable). The PD measurement system consists of a coupling network, a detection impedance, and a low noise amplifier. A 16 bit, 250 MS/s data acquisition system was used to analyze PD patterns. To simulate insulation defects in a power cable, a needle with the curvature radius of $10{\mu}m$ was inserted into the insulation part. We measured phase ($\Phi$), magnitude (q), and counts (n) of PD pulse for the defects, and classified PD patterns using the PRPD (phase Resolved Partial Discharge) method. From the analysis of acquired PD signals, we could find that a unique PD pattern is formed according to the types of defect.

• Proceedings of the KIEE Conference
• /
• 2004.05b
• /
• pp.136-139
• /
• 2004

It is widely known that the ultra high frequency (UHF) method that detects the electromagnetic wave of the PD pulses in the gas insulated space is one of the most competitive methods for its high sensitivity. From the above point of view, this paper describes the propagation characteristics of GIS PD signals measured with ultra wide band (UWB) GIS PD detecting system in which PD signals are detected into the dual UHF band. The UWB PD detection system consists of the UWB UHF coupler, the UWB low noise amplifier (LNA) and the oscilloscope. The dual bands for PD signals are 0.5-2GHz(full band) and 1-2GHz(high band). As results, propagation characteristics of GIS PD signals were measured in the mock-up GIS bus and it was found that the propagation characteristics of the high band showed a better result in accordance with the infernal configuration of the GIS bus than those of the full band.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.9
• /
• pp.727-731
• /
• 2012

This paper dealt with the measurement and analysis of electromagnetic waves radiated from a partial discharge (PD) source in insulation oil to apply condition monitoring of oil-immersed transformers. Two types of narrow-band monopole antennas with the resonant frequency of a 500 MHz and a 1 GHz were designed and fabricated. Also, a needle-plane electrode system was manufactured to simulate PDs and the curvature radius of the needle is 10 ${\mu}m$ and the diameter of the plane is 60 mm. Electromagnetic wave was measured by the PD measurement system with the monopole antennas. Detection sensitivity of the fabricated antenna was compared for the same PD magnitude; 620 $mV_{peak}$ for the 500 MHz antenna and 960 $mV_{peak}$ for the 1 GHz antenna to the PD magnitude of 74 pC. Consequently, the 1 GHz monopole antenna is more effective to detect PDs in oil-immersed transformers.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.7
• /
• pp.388-393
• /
• 2000

Hydrogen-sensing behaviors of Pd- and Pt-SiC Schottky diodes, fabricated on the same SiC substrate, have been systematically compared and analyzed as a function of hydrogen concentration and temperature by I-V and$\DeltaI-t$ methods under steady-state and transient conditions. The effects of hydrogen adsorption on the device parameters such as the barrier height are investigated. The significant differences in their hydrogen sensing characteristics have been examined in terms of sensitivity limit, linearity of response, response rate, and response time. For the investigated temperature range, Pd-SiC Schottky diode shows better performance for H2 detection than Pt-SiC Schottky diode under the same testing conditions. The physical and chemical mechanisms responsible for hydrogen detection are discussed. Analysis of the steady-state reaction kinetics using I-V method confirmed that the atomistic hydrogen process is responsible for the barrier height change in the diodes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.3
• /
• pp.229-235
• /
• 2012

This paper dealt with the fabrication of a partial discharge (PD) analyzer for insulation diagnosis of power facilities like transformers, cables and gas-insulated switchgears. An analytic algorithm for the phase (${\phi}$), the magnitude (q), and the pulse count (n) of PD pulse was designed and a time-frequency (TF) map algorithm was applied in the system to eliminate noises by analyzing the time and the frequency component of signals. All the algorithms were operated by a LabView graphical program. The detection circuit consists of a coupling capacitor, a detection impedance, and a low noise amplifier. A plane-plane and a point-plane electrode system were fabricated to simulate different types of insulation defects. In the experiment, we could easily understand the characteristics of PD pulses using the prototype PD analyzer.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.323-327
• /
• 2005

RT-PCR is an useful method to investigate the expression of target gene as detection tools. Although RT-PCR is the powerful detection method for tissues, it was difficult to amplify the target gene product using the single cell. To clarify the expression level of the genes related to Parkinson's disease (PD), I performed the laser dissection of single cell from Substantia nigra. I examined the mRNA expression level in the dopaminergic neuron isolated from the PD patients by the single cell RT-PCR method. It is known that tyrosine hydroxylase (TH), DOPA decarboxylase (DDC) are involved in biosynthesis of the catecholamine such as dopamine. Little has been known about the gene expression features of these enzymes in single dopaminergic neuron. I could detect the specific gene products in single cell level. The different expression was observed in PD-related gene products from the single neuron of PD patients. Interestingly, TH gene expression was significantly decreased with comparing the ratio of decrease in other PD-related genes. Hence, I represented data that indicate the RT-PCR method described in this report is an effective method in detecting a specific single-cell mRNA level related with diseases.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1562-1564
• /
• 1994

In this paper, we describe that the acoustic PD detection is examined in the various structures and position shapes of sensors. We find that the acoustic waves rate the complexity in various structures and position shapes of sensors may reduce the complexity of the acoustic wave in the PD detection of transformers.