• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권10호
• /
• pp.431-435
• /
• 2003

It is very difficult and dangerous to measure PD(Partial Discharges) from high voltage equipments in outdoor situation. But that is very important thing for preventing them from more serious accident by defects made by insulating degradation. This paper provides useful method to detect PD signals easily without any dangerous situation. Electric field sensor by the principle of capacitor can detect PD signals without direct connection between sensor and high voltage equipment and has very wide frequency range suitable for noise rejection. Electric field sensor and related circuit for processing PD signal show good performance as a PD sensor when it is applied to simulated high power equipment generating PD pulses.

• 한국수소및신에너지학회논문집
• /
• 제8권4호
• /
• pp.145-154
• /
• 1997

Pd, Pd-Rh 게이트 MOS센서의 $H_2$, $H_2S$ 검지특성과 Pd박막의 중착조건이 감지특성에 미치는 영향에 대해서 조사하였다. rf power의 증가와 증착온도의 증가는 모두 센서의 감도와 초기반응속도를 감소시켰으며 rf power의 변화보다는 증착온도의 변화에 의한 효과가 현저하였다. Pd-Rh 센서의 경우 순수한 Pd 센서에 비해 감도가 낮았으며 Rh의 양이 증가할수록 감도는 감소하였다. Pd-Rh 센서에서 $H_2$가 $H_2S$보다 더 뛰어난 감도를 보여주었다. rf power, 증착온도, 기판의 변화가 MOS센서의 감도나 초기반응속도 등의 센서특성에 영향을 미친다는 사실을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.922-924
• /
• 1998

In this paper, an optical fiber sensor(OF sensor) utilizing the principal of Mach-Zehnder interferometer were proposed to detect the partial discharge signals in insulating oil. At first the AC breakdown signals were detected to check the response of the OF sensor. The detected signals from OF sensor was consistent with that from current probe. After the response checking, simultaneous measurements and continuous recording were made of electrical and the OF sensor signals from partial discharge(PD) produced by IEC(b) electrode system immersed in insulating oil. The continuous recording made it possible to extract basic quantities of PD from the OF sensor signals, such as pulse phase and pulse amplitude distribution. Through the signal analysis, the absolute peaks of the OF sensor PD signal was found to be increased with the amplitude of electrical signals, and these results mean that there is a strong correlation between OF sensor and electrical PD signals. It was demonstrated that the OF sensor in this research had a possibility to detect the PD signals in power apparatus.

• 센서학회지
• /
• 제6권3호
• /
• pp.221-227
• /
• 1997

Pd/NiCr 게이트 MISFET 센서는 변압기 절연유중 용존수소를 감지하기 위해 제조되었다. 센서의 안정성과 고농도 감지성의 향상을 위해 Pd/NiCr 2중 촉매 금속 게이트가 사용되었다. 수소유입에 의한 게이트 전압의 드리프트를 줄이기 위해, 2개의 FET 게이트 절연층을 실리콘 산화막과 실리콘 질화막의 2중 구조로 하였다. Pd/NiCr 게이트 MISFET 센서의 수소 감응 감도는 Pd/Pt 게이트 MISFET 센서의 감도에 비해 약 0.5배이나, 안정성이 좋고, 1000 ppm까지의 고농도까지 측정할 수 있었다.

• 센서학회지
• /
• 제29권6호
• /
• pp.394-398
• /
• 2020

In this paper, we report the sensing performance of H₂ gas sensors composed of Pd/carbon nanotube (CNT) buckypaper at room temperature. The CNT buckypaper was made using a simple filtration process and subsequently deposited with Pd as the sensing material. The sensitivity of the sensor increased with respect to the gas concentration. To investigate the effect of Pd thickness, Pd layers of different thickness were deposited on the buckypaper, and the response of the sensor was evaluated. The proposed sensor exhibits excellent sensing properties with optimized Pd thickness at room temperature (25℃). Pd nanoparticles significantly impact the sensitivity and selectivity of the sensor because of the spillover effect. In addition, the sensor is highly suitable for bendable and wearable devices owing to its structural flexibility.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1480-1481
• /
• 2006

It is very difficult and dangerous to measure partial discharge from high voltage equipment in outdoor situation. But that is very important thing for preventing serious accidents from defects which originated in insulating degradation. This paper provides useful method to detect PD signals easily without any dangerous situation. Electric field sensor by the principle of capacitor detect PD signals without direct electrical connection between sensor and high power equipment and has very wide frequency range suitable for noise rejection. Electric field sensor and related circuit for processing PD signal showed good performance as a PD sensor when it is applied to simulated high power equipment generating PD pulse.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권2호
• /
• pp.83-90
• /
• 2004

This paper describes investigations of the UHF(Ultra High Frequency) PD(Partial Discharge) measuring technology designed for monitoring of PD in high power apparatus. Based on the spiral antenna theory, the hole type sensor for GIS with metal flange spacer and injection type sensor for oil filled transformer are developed. The experimental results show measurement characteristics of the PD sensor for several artificial defects in gas-insulated system(GIS) and oil transformer. Moreover, we proposed the new $\phi$-f-q method for the purpose of condition assessment of high power apparatus.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.356-361
• /
• 2018

고온에서 이용 가능한 수소 센서에 관해 연구하였다. 센서는 $Pd/Ta_2O_5/SiC$으로 구성된 MOS 구조로 제작되었으며, $Ta_2O_5$ 박막은 급속 열 산화법(RTO)법으로 형성하였다. 본 연구에서는 3가지 다른 패턴의 팔라듐(Pd) 전극으로 만든 센서를 제작하여, Pd 전극의 형태가 응답 특성에 미치는 영향을 고찰하였다. 그 결과, 센서는 Pd 전극의 채워진 면적이 클수록, 정전용량의 응답특성이 개선됨을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.442-445
• /
• 1999

In this work, to detect of hydrogen in DI water in the generator area of nuclear power plants was fabricated Pd/Pt gate MISFET sensor using Pd membrane. $H_2$ permeation through Pd accounts for external mass transfer, surface adsorption and desorption, transitions to and from the bulk metal, and diffusion within the metal. The identification of pinholes in the generator area of plant is an important safety consideration, as hydrogen build-up gives rise to explosion. For this type of application the sensor needs to be isolated in DI water, accordingly, a Pd membrane was used to separate the DI water. The hydrogen in the DI water was then absorbed on the Pd thin film and diffused into the oil through the thin film. The Pd/Pt gate MISFET sensor, encapsulated by oil, will thereby detect permeated hydrogen.

• 센서학회지
• /
• 제32권4호
• /
• pp.219-222
• /
• 2023

Partial discharges (PD) have long been recognized as a major contributing factor to catastrophic failures in high-power equipment. As the demand for high voltage direct current (HVDC) facilities continues to rise, the significance of on-line and real-time monitoring of PD becomes increasingly prominent. In this study, we have designed, fabricated, and characterized a highly sensitive and cost-effective PD sensor comprising a pair of copper electrodes with different arc lengths. The key advantage of our sensor is its non-invasive nature, as it can be installed at any location along the entire power cable without requiring structural modifications. In contrast, conventional PD sensors are typically limited to installation at cable terminals or insulation joint boxes, often necessitating invasive alterations. Our PD sensor demonstrates exceptional accuracy in estimating PD location, with a success rate exceeding 95% in the straight sections of the power cable and surpassing 89% in curved sections. These remarkable characteristics indicate its high potential for realtime and on-line detection of PD.