• 제목/요약/키워드: PCD

검색결과 186건 처리시간 0.027초

다결정 다이아몬드의 와이어방전가공에 관한 연구 (The Study on the WEDM of Polycrystalline Diamond)

  • 김창호;강재원;오장욱;서재봉
    • 한국기계가공학회지
    • /
    • 제7권3호
    • /
    • pp.67-74
    • /
    • 2008
  • Polycrystalline diamonds(PCD) tools are widely used in machining a large variety of advanced materials. However, the manufacture of PCD tool blanks is not an economical process. The shaping of PCD blanks with conventional machining methods(such a grinding) is long, labor-intensive process. This paper reports experimental investigation of the influence of electrical machining conditions on the metal removal rate of WEDM of PCD. Experimental results show that the longer pulse-on time and the shorter pulse-off time increase the metal removal rate and worsen the surface quality. The smaller grain size of diamond yields the metal removal rate and shows the better surface quality. Higher electrical conductivity of water yields worse surface roughness.

  • PDF

Al합금 PCD 선산가공에서 회귀분석에 의한 표면거칠기 예측 (Prediction of Surface Roughness on the PCD Tool Turned Aluminum Alloys by using Regression Analysis)

  • 이선우;이동주
    • 한국기계가공학회지
    • /
    • 제11권3호
    • /
    • pp.41-47
    • /
    • 2012
  • Surface roughness is widely used as an index for processing degree of accuracy. Recently, regression analysis to predict the machining results are actively used to characterize a cutting operations. In the past, diamond machining had been used for ultra precision cutting operation, but now industrial diamond tools like PCD(Polycrystaline Diamond) has been widely used in ultraprecision machining of nonferrous metals. In this study, the authors focus on the effect of PCD tool property on the surface roughness of different types of aluminum alloy after cutting process by CNC operated lathe. Based on the regression analysis approach on a surface roughness data obtained by experiment, predictive analysis of surface roughness is effective to achieve better surface quality.

Al5083 PCD 선삭가공에서 회귀분석에 의한 표면거칠기 예측 (A Prediction of Surface Roughness on the PCD Tool Turned Al5083 by using Regression Analysis)

  • 이선우;이동주
    • 한국기계가공학회지
    • /
    • 제11권6호
    • /
    • pp.69-74
    • /
    • 2012
  • Surface roughness is widely used as an index for processing degree of accuracy. Recently, regression analysis to predict the machining results are actively used to characterize a cutting operations. In the past, diamond machining had been used for ultra precision cutting operation, but now industrial diamond tools like PCD(Polycrystalline Diamond) have been widely used in ultraprecision machining of nonferrous metals. In this study, the authors focus on the effect of PCD tool property on the surface roughness of Al5083 aluminum alloy after cutting process by CNC operated lathe. Based on the regression analysis approach on a surface roughness data obtained by experiment, predictive analysis of surface roughness is effective to achieve better surface quality.

CFRP 드릴링에서 TiAlN DLC 코팅과 PCD의 공구마모 비교 (Comparison of TiAlN DLC and PCD Tool Wear in CFRP Drilling)

  • 백종현;김수진
    • 한국기계가공학회지
    • /
    • 제21권5호
    • /
    • pp.77-83
    • /
    • 2022
  • A high-hardness tool material is required to reduce extreme abrasive wear when drilling carbon fiber reinforced plastic (CFRP). Single-crystal diamond is the hardest material in the world, but it is very expensive to be used as a cutting tool. Polycrystalline diamond (PCD) is a diamond grit fused at a high temperature and pressure, and diamond-like carbon (DLC) is an amorphous carbon with high hardness. This study compares DLC coatings and PCD inserts to conventional TiAlN-coated tungsten carbide drills. In fiberglass and carbon fiber reinforced polymer drilling, the tool wear of DLC-coated carbide was approximately half that of TiAlN-coated tools, and slight tool wear occurred in the case of PCD insert end drills.

농흉 및 합병된 부폐렴성 흉막 삼출 환자에서 Pigtail 도관 배액의 유용성 (Efficacy of Pigtail Catheter Drainage in Patients with Thoracic Empyema or Complicated Parapneumonic Effusion)

  • 박정우;유승민;설원종;백은기;이규훈;서준범;정성환;안창혁;임영희;박정웅
    • Tuberculosis and Respiratory Diseases
    • /
    • 제54권2호
    • /
    • pp.219-229
    • /
    • 2003
  • 배경 및 목적 : 농흉과 합병된 부폐렴성 흉막 삼출의 치료에서 가장 중요한 것은 적절한 항생제 투여와 빠른 배액이다. 흉관 삽관은 소방이 형성되는 경우나 접근이 어려운 경우 성공률이 낮으며, 혈흉, 장기손상, 횡격막 파열, Hornor 증후군 등의 합병증이 보고되는 침습적 술기로, 최근에는 영상 유도에 의한 pigtail 도관 배액술(pigtail catheter drainage, PCD)이 시행되고 있다. 이에 저자 등은 농흉 및 합병된 부폐렴성 흉막 삼출 환자에서 PCD의 유용성을 알아보고자 후향적 연구를 시행하였다. 대상 및 방법 : 1998년 1월부터 1999년 6월까지 가천 의대 길병원에서 농흉 및 합병된 부폐렴성 흉막삼출로 진단되어 PCD시술을 받은 45명을 대상으로, 진단 당시 증상, 음주 및 흡연력, 혈액 검사 소견, 흉수 검사 소견, 방사선 소견(도관 삽관시, 도관 제거시, 도관 제거 한달 후), 삽관 후 24시간 배액량, 삽관 기간, 삽관 후 입원 기간, 외과적 처치여부 등을 조사하여 다음과 같은 결과를 얻었다. 결 과 : 대상환자의 남녀비는 42 : 3, 연령은 중앙값 52세(21~74)이었다. 농흉 환자는 23명, 합병된 부폐렴성 흉막 삼출 환자는 22명이었고, 이 중 PCD만을 시행받았던 4명(3명 : 부폐렴성 흉막삼출, 1명 : 농흉)의 환자가 추적관찰에서 탈락되었다. 이들을 제외한 나머지 환자들 중 36명(80%)에서 PCD 또는 PCD와 유로키나제 사용으로 배액이 가능하였으며, 농흉 환자 23명 중 5명(27.1%)만이 외과적 수술을 시행받았고(흉막 박피술 1명, 개방성 흉강 배액술 3명), 이 중 1명이 사망하였다. PCD만 시행 받은 환자군과 PCD와 유로키나제를 사용한 환자군에서 삽관 기간, 삽관 후 재원 기간 및 24시간 평균 배액량은 유의한 차이가 없었다. PCD만 시행 받은 환자군과 수술적 처치를 받은 군 간에 24시간 평균 배액량의 유의한 차이는 없었으며, 삽관 기간($9.4{\pm}5.25$일 vs. $19.2{\pm}9.42$일, p<0.05), 삽관 후 재원 기간($15.9{\pm}10.45$일 vs. $38.60{\pm}11.5$일, p<0.01)이 수술적 처치를 받은 군에서 더 긴 것으로 나타났다. 또한 PCD와 유로키나제를 사용한 군과 수술적 처치를 받은 군 사이에서도 24시간 평균 배액량의 차이는 없었고 삽관 기간($11.1{\pm}7.35$일 vs. $19.2{\pm}9.42$일, p<0.05)과 삽관 후 재원 기간($17.5{\pm}9.17$일 vs. $38.6{\pm}11.46$일, p<0.01)에 유의한 차이가 있었다. PCD 단독 또는 PCD와 유로키나제를 병행하여 사용한 40명의 환자 중 추적관찰시 탈락된 4명을 제외하고 16명(44.4%)에서 도관 제거시 75% 이상 흉수가 감소하였으며, 17명(47.2%)에서는 50~75%, 1명에서는 25~50% 감소하였고, 2명에서는 25% 미만으로 감소하였다. 도관 제거 한 달 후에는 1명을 제외한 35명(97.2%)이 50% 이상의 호전을 보였다. 추적 관찰 기간 중 pigtail 도관 삽관시 특기할 만한 합병증은 없었다. 결 론 : PCD는 농흉 및 합병된 부폐렴성 흉막 삼출 환자에서 심각한 합병증 없이 효과적으로 조기에 배액할 수 있는 유용한 시술로 사료된다.

Interplay between autophagy and programmed cell death in mammalian neural stem cells

  • Chung, Kyung Min;Yu, Seong-Woon
    • BMB Reports
    • /
    • 제46권8호
    • /
    • pp.383-390
    • /
    • 2013
  • Mammalian neural stem cells (NSCs) are of particular interest because of their role in brain development and function. Recent findings suggest the intimate involvement of programmed cell death (PCD) in the turnover of NSCs. However, the underlying mechanisms of PCD are largely unknown. Although apoptosis is the best-defined form of PCD, accumulating evidence has revealed a wide spectrum of PCD encompassing apoptosis, autophagic cell death (ACD) and necrosis. This mini-review aims to illustrate a unique regulation of PCD in NSCs. The results of our recent studies on autophagic death of adult hippocampal neural stem (HCN) cells are also discussed. HCN cell death following insulin withdrawal clearly provides a reliable model that can be used to analyze the molecular mechanisms of ACD in the larger context of PCD. More research efforts are needed to increase our understanding of the molecular basis of NSC turnover under degenerating conditions, such as aging, stress and neurological diseases. Efforts aimed at protecting and harnessing endogenous NSCs will offer novel opportunities for the development of new therapeutic strategies for neuropathologies.

Poly(caprolactone) diol/Poly(ethylene glycol)을 기초로 한 폴리우레탄 마이크로겔의 합성 및 특성 (Preparation and Physical Properties of the Polyurethane Microgels Based on Poly(caprolactone) diol/Poly(ethylene glycol))

  • 임정수;김공수;이무재;이영근
    • 폴리머
    • /
    • 제25권1호
    • /
    • pp.41-48
    • /
    • 2001
  • 폴리카프로락톤디올(PCD) 및 폴리에틸렌글리콜(PEG), 디이소시아네이트 및 1,2,6-헥산트리올을 용액중합 방법으로 반응시켜 폴리우레탄(PU) 마이크로겔을 합성하였다. PCD/PEG의 몰비가 다른 마이크로겔의 임계 겔화농도의 성질과 생성에 영향을 주는 중요한 인자임을 알았다. 디이소시아네이트, PCD/PEG의 몰비 및 PEG의 분자량을 달리하여 제조한 PU 마이크로겔의 물리적 및 열적 성질을 실험하였다. PU 마이크로겔은 300nm 이하의 다분산성 구형의 작은 입자로 분포되어 있으며, 저점도 특성을 나타내었다.

  • PDF