• 대한가정학회지
• /
• 제30권1호
• /
• pp.311-324
• /
• 1992

The purpose of this study is to take precautions against smoking behavior and delinquent by investigating the relation between smoking behavior and delinquent, analysing variables influence smoking behavior and delinquent. For the data set 1522 boys' high school students living in Pusan were chosen. The data were analyzed with the SPSS PC+ statistical package using Pearson's correlation and multiple regression. The main results are as follows: First, the rate of smoking is 39.4% among 1522 boys' high school students. First grade is 22.0%. Second grade is 44.5%. Third grade is 53.4%. Second, Delinquent experiences are in the order of going to game room(92.7%), drinking(89.4%), going to the prohibited movies(74.2%), thief(39.8%), going to discotheque(32.8%), kiss(29.8%). Third, smoking behavior and delinquent have positive correlationship. Forth, among the independent variables, grade, scholastic attainments, pocket-money, relegion, intimate friend's smoking, number of smoking friend, number of smoking family, family's thought on smoking have influence on smoking behavior. Fifth, among the sociopopulational variables, pocket money, scholastic attainments, club have influence on delinquent experience. Among enviornmental variables, intimate friend's smoking, number of smoking friend, girl friend, girl friend's smoking have influence on delinquent experience. Number of smoking family, parents' smoking, sibling's smoking, family's thought on smoking have partially influence on delinquent experience.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.214-215
• /
• 2008

Zinc-oxide(ZnO) films were deposited on PC(polycarboanate) and PES(polyethersulphone) substrates by using RF(radio-frequency)sputter with various rf sputtering Power at a room temperature. The effects of rf sputtering Power on the structural and optical properties of ZnO films were investigated by using atomic force microscopy, X-ray diffraction, and UV spectrophotometer. The most excellent structural and properties of a ZnO film are obtained in the condition of an rf-power of 150 W. This film shows larger Grain size and lower surface roughness and a higher optical transmittance of over 80 % in the visible range than other films deposited in the different conditions of rf- power. Regardless of substrate types, The presence of a strong diffraction peak indicates that films have a (0 0 2) preferred orientation associated with the hexagonal phase.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1542-1545
• /
• 2009

For the application of flexible substrate to future display and new transparent devices, indium tin oxide (ITO) thin film was formed on polycarbonate(PC) substrate at room temperature by in-line sputter system. During the ITO sputtering, Ar and $O_2$ reaction gas were fixed at a constant value and the process pressure was varied from 3 to 7 mtorr. From the electrical and the optical properties of sputtered ITO films, the sheet resistances of as-deposited ITO films varied with a different pressure and the optical transmittances of the ITO films at visible wavelength were maintained above 85%. The results are considered to be due to the saturation of $O_2$ atoms from reaction in ITO film.

• Child Health Nursing Research
• /
• 제5권3호
• /
• pp.349-357
• /
• 1999

Injuries are important causes of death and disability. The Purpose of this study was to determine how often preschoolers have injuries and what factors affect the injury occurrences. The sample consisted of 360 Preschoolers who were registered at eight nurseries located in Sedaemoongu. Seoul. The data were analyzed using the SAS PC statistical package. The results of the study are as follows: During last 12 months 73.1% of 360 preschoolers had accidental injuries In an analysis of the location where the injury took place, showed that the most places were in the nursery(17.3%) and around home(14.4%), and the most place inside home were in the bedroom(13.9%) and living room(13.9%). There were the diverse and injurious risks inside the home as well as around home. The most frequent type of injury was abrasion(27.5%) and most children injured their legs(28.3%). They were treated most frequently at home(52.8%) and usually emergency treatment was performed by family members with disinfection being the main type of first aid To identify factors related to injury occurrence, multiple logistic regression was performed and the main factors were the age of child, active tendency, and mother's education level.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2004년도 춘계학술대회 발표 논문집
• /
• pp.179-184
• /
• 2004

This paper is an overview of the experimental work using a Planar Magnetic Levitation Stage System structure proposed by Dr. Won-Jong Kim in his PhD thesis. Based on his results, we built an Experimental Test Stand (ETS), which enabled us to get accustomed with the new technology and to create new control structures and algorithms. The ETS is controlled by a powerful controller made of 4 DSPs mastered by a PC. This controller structure increases the controller bandwidth up to 10 kHz leading to a better emulation of an analog controller and leaving enough room for further development. Based on analyzing all the factors that can affect the performances of the system, we achieved a great accurate positioning performance of sub-nanometer RMS value.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.267-270
• /
• 2004

A silver indium sulfide($AgInS_2$) epilayer was grown by the hot wall epitaxy method, which has not been reported in the literature. The grown $AgInS_2$ epilayer has found to be a chalcopyrite structure and evaluated to be high qualify crystal. From the photocurrent measurement in the temperature range from 30 K to 300 K, the two peaks of A and B were only observed, whereas the three peaks of A, B, and C were seen in the PC spectrum of 10 K. These peaks. are ascribed to the band-to-band transition. The valence band splitting of $AgInS_2$ was investigated by means of the photocurrent measurement. The crystal field splitting, $\ddot{A}cr$, and the spin orbit splitting, $\ddot{A}so$, have been obtained to be 0.150 eV and 0.009 eV at 10 K, respectively. And, the energy band gap at room temperature has been determined to be 1.868 eV. Also, the temperature dependence of the energy band gap, $E_g(T)$, was determined.

• 대한간호학회지
• /
• 제49권5호
• /
• pp.562-574
• /
• 2019

Purpose: The purpose of this study was to identify the response patterns of nursing unit managers regarding workplace bullying. Methods: Q methodology was used to identify the response patterns. Thirty-six Q samples were selected from the Q population of 210 that included literature reviews and in-depth interviews with clinical nurses and nursing managers. Participants were 30 nursing unit managers who had experience managing workplace bullying and they classified the Q samples into a normal distribution frame measured on a nine-point scale. The data were analyzed using the PC-QUANL program. Results: Five types of response patterns were identified: (1) sympathetic-understanding acceleration, (2) harmonious-team approach, (3) preventive-organizational management, (4) passive observation, and (5) leading-active intervention. The preventive-organizational management type was most frequently used by the nursing unit managers. Conclusion: The results of this study indicated that nursing unit managers attempted to prevent and solve workplace bullying in various ways. Therefore, it is necessary to develop and conduct leadership training and intervention programs that appropriately address the response patterns of nursing unit managers, such as those identified in this study.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.4177-4185
• /
• 2012

LED는 환경 친화적인 광원으로 에너지 절약을 위해 기존 조명등을 빠른 속도로 대체하고 있다. 최근에는 에너지 소비가 많은 빌딩의 설계와 옥 내외 광고를 제작함에 있어서 LED를 적극 채택하여 그린 빌딩 및 고효율 저비용 백라이트 도입에 박차를 가하고 있다. 특히 기존의 형광등을 이용했던 실내등과 광고판용 백라이트 분야는 전력소비가 많을 뿐 아니라 SMPS(switched mode power supply)에 의한 부피, 무게 및 수명제한의 제약이 있었다. 그러므로 본 논문에서는 SMPS가 필요 없는 $12{\times}12$ FLB(flexible LED board)와 실내등용 LED 면조명을 위한 AC 직결형 구동기를 개발하였다. 제안 시스템은 고역율의 LID-PC-R101B 칩셋을 포함하고 고효율을 위한 LED 스위치 회로들로 구성되어 있다. 정교한 시스템 디자인을 통해 고효율, 높은 안정성 및 낮은 에너지 소비의 장점을 가지게 한다. 제안된 FLB는 크기 $450{\times}450$ mm, 두께 4 mm 그리고 무게 280 g의 초슬림 구조를 가진다. 최종적으로 제안시스템의 성능검증을 위해 교류 직결형 구동 회로를 채택한 FLB와 면조명의 시제품을 제작하여 실험하였다.

• 대한화장품학회지
• /
• 제40권2호
• /
• pp.163-170
• /
• 2014

Phosphatidylcholine (PC) 인지질로 이루어진 모델 지질막은 세포막을 대신하여 지질막과 여러 분자간의 상호 작용을 연구하는 생물리 연구에 흔히 이용된다. 이들 모델 지질막을 제조하는 과정에서 지질 분자나 지질막과 작용하는 분자를 용해하는데 여러 가지 유기 용매가 이용된다. 용해 과정에 사용된 용매는 물론 제거되거나 소량 사용되기 때문에 실험 결과에 미치는 영향이 미미한 것으로 간주되어 보통 무시된다. 하지만 용매의 종류에 따라 소량의 용매가 용질 분자에 남아서 실험 결과에 영향을 미칠 수 있다. 본 연구에서는 시차열분석기와 인($^{31}P$) 고체 핵자기 공명 실험을 통하여 유기 용매가 지질막의 상변이와 지질막의 물리적 성질에 미치는 영향을 조사하였다. 클로로폼에 용해한 지질의 경우 비교적 쉽게 제거되었으며, 에탄올, trifluoroethanol(TFE) 또는 trifluoroacetic acid (TFA)에 용해한 분자들의 경우 용질에 잔류하여 지질과 용질의 상호작용시 지질의 물리적 성질에 영향을 미치는 것이 확인되었다. 따라서 지질막과 상호작용하는 분자들의 연구에서 용매의 선택이 중요하며 비록 미량이 사용되었을지라도 시료 제조와 실험 결과의 해석에 각별한 주의가 필요함을 보여 준다.

• 콘크리트학회논문집
• /
• 제17권3호
• /
• pp.329-334
• /
• 2005

폴리머콘크리트는 시멘트 콘크리트에 비해 강도와 내구적 성능 등 여러면에 있어 우수하여 건설현장에서의 벽체용 패널, 통신용 맨흘, 기계설비의 기초, 지하연결박스 등 다양한 용도로 개발되고 사용되어지고 있다. 그러나 폴리머콘크리트는 그 결합재로 쓰이고 있는 수지의 비용이 높아 경제적인 면에서 불리하여 기존 수지를 대체할 수 있는 결합재에 관한 연구가 필요하다. 여기서, PET를 재활용한 폴리머콘크리트는 산업폐기물을 재활용한 것이므로 경제적인 건설 소재가 될 수 있으며, 친환경적인 효과를 가져올 수 있기 때문에 현재 연구가 활발하게 이루어지고, 사용 영역이 확대 될 것으로 전망된다. 하지만 아직까지 PET재활용 폴리머콘크리트의 응력-변형률 거동에 관해서는 기초적인 연구상태에 있다. 따라서, 본 연구에서는 폐 PET를 합성한 불포화 폴리에스터 수지를 폴리머콘크리트의 결합재로 이용하여 콘크리트를 제조하였으며, 수지량, 골재의 최대치수, 양생방법에 변화를 주었다. 그리고 변위제어가 가능한 M.T.S 장비를 사용하여 응력-변형률 곡선을 관찰하였다. 그 결과 PET 재활용 폴리머콘크리트의 압축강도는 수지의 함량, 굵은골재의 크기변화, 양생방법에 모두 영향을 받는 것으로 나타났다. 탄성계수의 변화는 수지의 함량이 크게 좌우하였으며, 굵은골재의 최대치수와 양생방법에서 크게 영향을 받지 않았다. 최대응력에서의 변형률은 수지의 함량과 굵은골재의 최대치수에 영향을 많이 받는 것으로 나타났다.