• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.107-114
• /
• 2017

Pseudo capacitors belong to one group of super capacitors which are consisted with non carbon based electrodes. As such, conducting polymers and metal oxide materials have been employed for pseudo capacitors. Conducting polymer based pseudo capacitors have received a great attention due to their interesting features such as flexibility, low cost and ease of synthesis. Much work has been done using liquid electrolytes for those pseudo capacitors but has undergone various drawbacks. It has now been realized the use of solid polymer electrolytes as an alternative. Among them gel polymer electrolytes (GPEs) are in a key place due to their high ambient temperature conductivities as well as suitable mechanical properties. In this study, composition of a polyacrylonitrile (PAN) based GPE was optimized and it was employed as the electrolyte in a pseudo capacitor having polypyrrole (PPy) electrodes. GPE was prepared using ethylene carbonate (EC), propylene carbonate (PC), sodium thiocyanate (NaSCN) and PAN as starting materials. The maximum room temperature conductivity of the GPE was $1.92{\times}10^{-3}Scm^{-1}$ for the composition 202.5 PAN : 500 EC : 500 PC : 35 NaSCN (by weight). Performance of the pseudo capacitor was investigated using Cyclic Voltammetry technique, Electrochemical Impedance Spectroscopy (EIS) technique and Continuous Charge Discharge (GCD) test. The single electrode specific capacity (Cs) was found out to be 174.31 F/g using Cyclic Voltammetry technique at the scan rate of 10 mV/s and within the potential window -1.2 V to 1.2 V. The same value obtained using EIS was about 84 F/g. The discharge capacity ($C_d$) was 69.8 F/g. The capacity fade over 1000 cycles was rather a low value of 4%. The results proved the suitability of the pseudo capacitor for improving the performance further.

• 한국철도학회논문집
• /
• 제19권1호
• /
• pp.1-10
• /
• 2016

본 논문은 고속열차 객실 내 유리창의 차음 성능을 향상시키기 위한 기반연구로, 접합유리에 사용되는 고분자 필름의 물성과 음향학적 특성을 분석하여 그 상관관계를 살펴보고자 하였다. 기존에 사용되고 있는 PVB(polyvinyl butyal) 필름 및 다른 단량체 비율을 가지는 PVB 유도체, 그리고 유리 사이 차음재로 사용가능 한 PC(polycarbonate)의 동적기계적 특성을 분석(DMA)하였다. DMA 분석을 통해 상온에 가까운 온도범위에서 유리전이온도($T_g$)를 가지며 tan ${\delta}$(loss tangent) 값이 큰 것으로 나타난 PVB-HEMU 시편의 댐핑(damping) 성능이 가장 우수할 것으로 예측하고, 이를 고속철도 차량의 접합유리창과 동일한 구조에서의 투과손실 시험과 해석을 통해 검증하고자 하였다. 접합필름의 종류에 따른 유리창 투과손실 값을 투과손실 측정(인텐시티법)과 FE 해석을 이용해 도출하고, 고분자 필름의 물성과 음향성능 간 상관관계 분석을 위한 기초자료를 구축하였다.

• 디지털융복합연구
• /
• 제14권7호
• /
• pp.193-200
• /
• 2016

최근 들어 가정 내 태양광과 에너지저장시스템을 도입하여 에너지 자립도를 높이고자 하는 기술 개발이 활발히 이루어지고 있다. 낮에 생산된 전기를 에너지 저장 시스템에 충전해 두고 전기요금이 높을 때 사용함으로써 효율적인 에너지 관리를 수행할 수 있다. 국내에서는 아직까지 가정용 실시간 요금제가 이루어지고 있지 않지만 누진제 상의 일정 목표까지 전기 사용량을 낮출 수 있다. 가정 내 태양광을 도입하기 위해서는 전력 변환장치인 PCS를 필요로 한다. PCS는 직류로 생산된 전력을 교류로 변환하여 사용하고 에너지 저장 시스템의 충방전을 수행하도록 한다. 에너지 자립형 스마트 홈 시스템은 태양광, 에너지저장시스템에 대한 일반인들의 관심이 높아지면서 해외를 중심으로 시장이 형성되는 단계이다. 본 논문의 결과물은 실환경에 설치되어 검증을 수행하였으며 실시간 요금제를 가정하여 에너지 절감 효과를 분석하였다.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.351-356
• /
• 2014

A spherical $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor for use in white-light-emitting diodes was synthesized using a liquid-state reaction with two precipitation stages. For the formation of phosphor from a precursor, the calcination temperature was $1,100^{\circ}C$. The particle morphology of the phosphor was changed by controlling the processing conditions. The synthesized phosphor particles were spherical with a narrow size-distribution and had mono-dispersity. Upon excitation at 395 nm, the phosphor exhibited an emission band centered at 497 nm, corresponding to the $4f^65d{\rightarrow}4f^7$ electronic transitions of $Eu^{2+}$. The critical quenching-concentration of $Eu^{2+}$ in the synthesized $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor was 5 mol%. A phosphor-converted LED was fabricated by the combination of the optimized spherical phosphor and a near-UV 390 nm LED chip. When this pc-LED was operated under various forward-bias currents at room temperature, the pc-LED exhibited a bright blue-green emission band, and high color-stability against changes in input power. Accordingly, the prepared spherical phosphor appears to be an excellent candidate for white LED applications.

• 기본간호학회지
• /
• 제6권2호
• /
• pp.267-276
• /
• 1999

The purpose of this study was to identify risk factors predictive of alterations in skin integrity during the intraoperative period. The predictive risk factors were studied for intraoperative pressure sores from December 1998 through January 1999. A sample of 220 patients was selected from the operating room schedule of a University Hospital in Pusan. There were two criteria in including patients : the operation lasted longer than 2 hours and the absence of skin break-down according to NPUAP criteria. The data were analized by SPSS/PC, Stepwise multiple logistic regression was used to identify the variables which were predictive of alterations in skin integrity. Of the 220 patients studied, 41 patients (18.6%) developed stage 1 pressure sores in the immediate postoperative period. In relation to skin changes, three independent variables emerged from the stepwise multiple logistic regression as being significant (p<0.05). Factors predictive of pressure sore formation included low serum albumin(p=0.000), prone position while undergoing surgery(p=0.0004), time on the operating table(p=0.0165). Among the intrinsic factors, serum albumin was the most significant causal factor in pressure sores development in the intra-operative period. Pressure and shearing force were the most significant extrinsic factors in pressure sores development. From the results of this study we concluded that the primary nursing goal is the maintenance of the proper patient' position during the intraoperative period. Also imperative for sore prevention is the reduction of surgery time and improving preoperative nutritional status.

• 한국실내디자인학회논문집
• /
• 제27권2호
• /
• pp.68-76
• /
• 2018

A public library is changing into a place where people can freely acquire and make use of information in digital environment with the basic ideology of publicity. In spite of such changes, multimedia center is still biased with the function of computer room to use PC and is not used actively by many users. This study can be summarized and concluded as follows and spatial characteristics of digital data room of public library can make use of space planning elements by aspects as an analysis tool. First, designed characteristics focusing too much on the possession of seats for reading digital data. Therefore, spatial planning for users to choose necessary facilities according to the data they wish to read and type of users is needed. Second, interior tone of multimedia center is applied with identical color for all floors, walls, and ceilings, to create sense of unification. However, due to the arrangement of similar colors, while using identical brightness and chroma, some users felt difficult to realize shape or depth in space. It is more appropriate to apply distinctive color plan according to the characteristic of the data or space region, in order to create pleasant digital environment for visually weaker people or elderly. Third, psychological or technical factors of multimedia center is not sufficiently applied in space planning elements for users. In order for various digital service of public library to be technically implemented, it is necessary to organize open space by expanding the size of multimedia center to utilize high-tech facilities.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.87-95
• /
• 1990

본 연구에서는 고온기기의 구조용 부재로 널리 사용되고 있는 304스테인리스 강을 선택하여 상온, $538^{\circ}C$($1000^{\circ}$ F) 및 $593^{\circ}C$($1100^{\circ}C$ F) 고온하의 작은 표면노치 시험편 에서 발생한 표면 피로 균열의 성장거동을 레플리카법에 의하여 상세히 관찰측정하여 파괴역학적으로 해석 연구하고자 한다. 즉 피로균열의 성장특성을 ....$\DELTA\sigma^{n}$a의 매 개변수를 도입하여 정량적으로 평가하고, 수명예측을 실시하여 그 유용성을 비교검토 하였다. 또한 피로균열의 성장에 관한 실험결과 자료들을 PC를 이용하여 전산하고 도식화함으로써 파괴역학적 설계에 유용한 기초적 자료를 제시하고자 하였다.

• 한국전기전자재료학회논문지
• /
• 제23권9호
• /
• pp.708-713
• /
• 2010

In this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance light emitting diode (LED) for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area. And at the time of design of ring light, the characteristics of LED and the loss of light at the time of penetrating light diffusion PC were considered so that intensity of illumination for over 150 lx can be obtained. The result of measurement of the intensity of illumination of the ring light that was developed revealed that maximum intensity of illumination of 225.7 lx was obtained, while smoke index was measured to be maximum 78 Ra in the case of Red(50%) Green(100%) and Blue LED(60%). We could confirm that response speed was also very fast as 1.72 ms.

• 한국실내디자인학회논문집
• /
• 제25호
• /
• pp.142-148
• /
• 2000

The purpose of this study is to provide a practical guide for the actual conditions and the preference of student housing in a regional university. The data are collected through questionnaire surveys from the students of a regional university. 265 samples are collected, and are analyzed by using SPSS-PC. The results are as follows: 1) The actual conditions of student housing Most residents of student housing(76.3%) come from the Capital region. Most of student housing are located at 30 minute distance from the school. Most of house style are Offistel as one room style. Most of housing size are within 10 minute distance from the school. Most of house style are Offistel as one room style. Most of housing size are within 10py, and two people reside in one unit. The average hours of staying at the student housing are over 10 hours. The most inconvenient factor is the lack of soundproofing in the current student housing. 2) The preference of student housing The most preferred location is in the walking distance from the school, and the apartment is the most preferred housing style. The most preferred installation of inside is internet connection. When choosing student housing, students prefer the distance from the school as the most important factor. Most female students reside with a roommate within 10 py of housing size, cook for themselves, and consider rent and maintenance fee as the decision factors in choosing housing. The most preferred style of house is apartment, and they prefer to install basic furniture and kitchen system inside of housing. As students go up to higher grade, they prefer the apartment, and prefer to cook for themselves. More fresh men reside with a roommate compared to other grades. They prefer Offistel with meals service at a walking distance from the school.

• 한국가정과교육학회지
• /
• 제4권1호
• /
• pp.77-86
• /
• 1992

This thesis has two objects： Firstly, the arrangement of basic data and formulating a system of experiment and practice in home economics and Secondly, the groping the way of improving the problems raised in the home economics education spot. A questinaire is used as the research tools for the fitness of content, of experiment and practice in the home economics and SPSS/PC(sup)+ and Scheffe Test are used for investigation. The results are as follows. 1. Students recognize the importance of experiment & practice more than the teacher. In the type of middle school teachers engaged in the girl’s middle school recognize the importance of experiment & practice more than those of coeducation middle school. 2. The percent of the school which executes over the 50% of experiment & practice in the contents of text book is 70%. The most numerous in the sphere of guiding is ‘seperate practice of student’. The reason of not executing the experiment & practice are ‘the concentration of the theory education’and ‘the lack of equipment and tools’3. Practice room for cooking was mostly established, but practice room of sewing was established only 5.6%. The contents of textbook for clothing sphere can be executed by using the equipment & tools of school only 9.2%. 4. 40% of the students feel that the content level of experiment & practice is difficult. Most of the students feel that the content level of experiment & practice, especially in the sphere of clothing, in unproper on the level fitness of contents by grade. 5. Most of the students assent on the positive effect for the degree and the most important cause for its not contributing to the everday life is the lack of experiment & practice in school. 6. Most of the students feels positively on the interest degree of content and the students who though much of the experment & practice feels positively on the interest degree of content.