• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.21-24
• /
• 2008

더블T 공법(DTS)의 취약점을 개선하기 위하여 개발한 와플 형상을 가지는 PC 슬래브(이하 WAS라 칭함)의 접합성능을 검증하기 위하여 역T형 보(ITB)와 접합된 실험체를 제작하고 실험을 수행하였다. 실험체는 PC 공장에서 ITB에 WAS를 걸친 후 충전재료를 채워 넣어 조립한 후 충전재료를 타설하는 방식으로 총 3개 제작하였고, 변수는 전단키의 폭과 충전재료의 종류(덧침 콘크리트, 무수축 모르타르)로 하여 동일한 조건에서 재하 실험을 수행하였고, 접합성능 실험체의 변위 및 내력을 비교하였다. 본 연구에서의 결론은 다음과 같다. 전단키 폭은 접합성능에 큰 영향을 미치지 않는 것으로 나타났다. 따라서 충전재료의 다짐이 충분한 최소한의 전단키 폭으로 설계하여도 내력에 큰 영향을 미치지 않을 것으로 사료된다. 또한 두 부재간의 접합 부분 충전재료로 덧침 콘크리트와 무수축 모르타르를 사용한 결과, 두 재료 모두 내력을 확보하고 있는 것으로 나타나 덧침 콘크리트를 사용하여 시공의 편리성을 확보하는 것이 유리할 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.131-138
• /
• 2001

Total number of seven experimental specimens of size 4.6m$\times$2.4m are designed in full scale with due considerations given to the constructability as well as economic applications. Each specimen is made with different shapes of trusses or hooks along the interfacial surface between precast panel and topping concrete to maintain appropriate shear resistance. Structural performances in terms of strength and ductility under flexural load are examined for each specimen with different types of interfacial shear resistance reinforcements. Experimentally obtained flexural strength are also compared with those of analytical predictions. Based on experimental and analytical studies, design equations are suggested for the developed precast prestressed concrete half-slab systems.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.85-88
• /
• 2011

우리나라의 주택환경에 적합하게 개발된 MRS공법을 기본으로 하여, 현장의 여건에 맞추어 4층1절 기둥을 활용함으로써 원가절감, 공기단축 등의 유형적 성과와 함께 현장의 작업환경 개선을 통한 시공성 향상이라는 무형의 성과를 함께 얻을 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.955-960
• /
• 2000

This paper evaluates the serviceability of vibration that is induced by people's walking and running when the long span hollow core slab is used. The dynamic characteristics like a natural frequency and a ramping ratio are found by impact loading test on the mock-up structures. Also, the human induced loading test output is evaluated by the various serviceability criteria. As the various serviceability criteria satisfy with this result, the vibration problem of relevant slab caused by people's behavior does not matter.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 봄 학술발표회 논문집
• /
• pp.30-35
• /
• 1994

In order to investigate on the behavior of one-way slab with Kaiser. Truss, such as flexural strength, failure mode, and ductile capacity, a total of twenty specimens have been tested and compared with the R.C slab without Kaiser Truss. The major variables are Kaiser Truss intervals(30, 40, 60cm), half slab thickness. Test results showed that support interval of half pc slab can be determined by the flexural strength which causes the concrete crack and there are horizontal cracks between upper concrete and half slab in the connection of the specimen with kaiser truss interval 60cm.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.161-162
• /
• 2020

Cracks are caused by drying shrinkage between the upper part of the underground parking lot and the apartment wall. As a result of the investigation, the distance between the apartment and the apartment is more than 45m, and the top slab of the underground parking lot is usually flat when there is not with steps. Therefore, the crack occurs more when the underground parking lot is a PC slab than a RC slab. In this study, the reduction of cracks was conducted by extending the slab, expanding the beam size, increasing the wall thickness, and installing a delay joint on slab. In each case, a finite element analysis was performed to examine the crack reduction method.

• 한국재난정보학회 논문집
• /
• 제14권4호
• /
• pp.492-500
• /
• 2018

연구목적: 본 논문에서는 이와 같은 배경을 근거로 충격하중 재하시 신소재 섬유로 보강한 콘크리트 슬래브 거동을 연구하는 것을 주 목적으로 알루미늄 섬유를 이용한 AFRP로 보강한 콘크리트 슬래브 중앙의 강재를 자유낙하 시켰을 때 충격실험을 검토하고자 한다. 연구결과: 신소재를 콘크리트 부재의 보강재로 이용하는 연구는 정적 하중하에서 휨 및 전단에 관한 연구나 반복하중 하에서 피로하중에 관한 연구와 PC 보에서의 적용에 관한 연구 등이 많이 보고 되고 있다. 결론: 신소재를 콘크리트 부재의 보강근으로 이용하는 연구의 일환으로 본 논문에서는 알루미늄 섬유로 보강된 조립상 AFRP 로트를 이용한 콘크리트 슬래브를 설치하여 동적거동에 대해서 실험을 실시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.71-72
• /
• 2016

Most of studies on PC method aim at the structural analysis and development of PC members, and studies on the construction management aspect are insufficient. Therefore, this study tries to investigate 'hallow PC column composite method(HPC composite method)' from the viewpoint of construction management and analyze the construction cost of the composite method. On the assumption that each comparative method was applied to the zone, the difference in construction cost between the two methods was analyzed. As a result, HPC composite method increased the initial investment cost because of its factor technology, but reduced transport cost, lifting cost, and installation cost through lightweight columns. This study analyzed only the difference in construction cost of HPC composite method so that it has the limitation in evaluating its economy. Therefore, to evaluate the economy of HPC composite method, it is considered to research more the construction cost of HPC composite method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.307-310
• /
• 2005

The PCS system, which consists of precast concrete column and steel beam, has been under development. Experimental test has been carried out to investigate the structural performance of the system under earthquake. Two types of test specimens of beam-column joints are designed in order to compare the performances. One is the system with reinforced concrete slab and the other is without slab. It is found that the system with slab could satisfy all of the requirements from ACI Criteria such as strength, stiffness degradation and energy dissipation capacity except initial stiffness. It is also investigated that the stiffness of the joint is belong to rigid joint type according to Bjorhovde criterion. And it is observed that the partial-composite system between beam and slab is more effective than full-composite system in the respect of the energy dissipation capacity of the system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1223-1228
• /
• 2007

Since KHSL 2nd phase was adapted as a main track design, the interests of concrete slab track system have been gradually increased in the division of rail track engineering and many engineering companies have been trying to adapt a concrete slab track system at this moment. Advantages of this system proved in advanced country, japan and Germany etc. are excellent maintenance, track stability and increasing of buckling resistance This developed turnout is same with the KHSR 1st phase's design and applications rules, components and signaling system since it observes KTX specification. Comparing it with the former turnout, High-elasticity pad, lubrication-free roller slide plate and Rheda2000 PC sleeper are only different. The purpose of this study is the development of high speed turnout on concrete slab track and its application on site. Now these studies are going to show the verification and confidence about the interface between ballast-track and concrete slab track by finding and solving the possible problems when it is installed on site and to make these turnouts applied perfectly and completely on concrete slab track. Its first trial construction in korea had been successfully completed at Sangju-station on July 20th ,2007 thanks to KORAIL and KR. Hereunder Sampyo E&C trys to introduce all of turnout technologies on concrete slab track system with Rheda 2000 sleeper