• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.05a
• /
• pp.101-106
• /
• 2000

자동화 기기 분야에서 컴퓨터의 적용 및 응용은 하드웨어 발달에 따라 매우 빠르고 민감하게 반영되어왔다. 이는 컴퓨터 하드웨어의 빠른 개발 주기에 맞춰 저 가격, 고 효율성, 높은 신뢰성, 호환성 등의 장점을 가진 PC가 현대의 컴퓨터 흐름을 주도하게 되면서 자동화 산업분야 또한 이를 적용하여 왔기 때문이다. 이에 따라, 자동화 기기 분야에서는 고 가격, 긴 개발기간 등을 필요로 했던 과거와 달리 저 가격, 짧은 개발기간, 다양한 개발환경 등을 이룰 수 있었다. 또한, 생산량 증가에만 의존하던 과거와 달리 현대에 이르러서는 시스템의 최적화, 효율의 극대화, 시스템의 안정성, 운용의 편리성, 호환성 등의 개념들이 도입되고 있는 것이다. 자동화 기기를 구성하는 요인으로는 크게 시스템의 틀을 이루는 기계부분과 이를 제어하는 제어 시스템부로 나뉠 수 있다. 제어 시스템에서는 기계부분의 동작을 제어하는 동작 제어부와 이에 관한 정보를 화면에 나타내는 GUI(Graphical User Interface)부분으로 나뉘게된다. 현재에는 이를 통합하여 하나의 하드웨어에서 제어부와 GUI를 모두 담당하는 방법이 연구 진행되고 있으나, 하드웨어를 둘로 나누거나 하나로 하여도 제어부와 GUI 사이의 통신부분은 빼놓을 수 없는 요소가 된다. 따라서, 본 논문에서는 시스템의 안정성을 위하여 두 시스템간에 송·수신되는 데이터를 추적할 수 있도록 하는 Emulate 기법을 구현 및 개발하고자 한다. 이는, 두 시스템간의 통신 데이터를 실시간으로 누적, 저장하여 사용자로 하여금 시스템의 운용상태를 분석할 수 있게 하였으며, 시스템 오류발생 시 Emulate 자료를 근거로 시스템의 운용상태를 파악할 수 있게 하였다.근 제한기능을 제공하며 각 클라이언트와 서버간의 실시간 연결 혹은 지연연결을 지원하는 독립적인 애플리케이션이다. 이러한 처방전달 메시징시스템을 구성하는 각 요소에 대해 정의하고 개념적 모델을 설계하고자 한다.에게 청구되며, 소비자에게 전송 되는 청구서는 사용자DB를 참조하여 사용자가 미리 정의한 원하는 형태로 변환되어 전달되며, 필요시 암호화 과정을 거치는 것이 가능해야 한다. 전송된 청구서는 전자우편의 경우, 암호해독이 가능한 전용 브라우저를 통해 열람 되며, 이는 다시 전용 브라우저를 통해 지불인증이 승인되어 청구 제시서버에게 전송된다. EBPP 시스템의 제어 흐름은 크게 기업이 청구 정보를 소비자에게 제시하는 흐름과 소비자의 지불 승인으로 인해 기업이 은행에 지불을 요구하는 흐름으로 구분할 수 있다. 본 논문에서는 통합 청구서버 및 정구 제시서버의 역할 및 구성 요소들에 대해 서술하고, EBPP 시스템과 연동하여야 하는 메일 서버와의 상호 작용에 대해 서술할 것이다. 본 시스템을 아직 구현이 되지 않은 관계로 시스템의 성능 등의 수치적 결과를 제시할 수 없는 상태다., 취약계층을 위한 일차의료, 의약관리), ${\circled}2$ 보건소 조직 개편 및 민간의료기관과 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was foun

• Journal of Astronomy and Space Sciences
• /
• v.17 no.1
• /
• pp.53-66
• /
• 2000

We developed low light CCD imaging system using thermoelectric cooling method collaboration with a company to design a commercial model. It consists of Kodak KAF-0401E(768$\times$512 pixels) CCD chip, thermoelectric module manufactured by Thermotek. This TEC system can reach an operative temperature of $-25^{\circ}C$. We employed an Uniblitz VS25s shutter and it has capability a minimum exposure time 80ms. The system components are an interface card using a Korea Astronomy Observatory (hereafter KAO) ISA bus controller, image acquisition with AD9816 chip, that is 12bit video processor. The performance test with this imaging system showed good operation within the initial specification of our design. It shows a dark current less than 0.4e-/pixel/sec at a temperature of $-10^{\circ}C$, a linearity 99.9$\pm$0.1%, gain 4.24e-/adu, and system noise is 25.3e-(rms). For low temperature CCD operation, we designed a TEC, which uses a one-stage peltier module and forced air heat exchanger. This TEC imaging system enables accurate photometry($\pm$0.01mag) even though the CCD is not at 'conventional' cryogenic temperatures(140k). The system can be a useful instrument for any other imaging applications. Finally, with this system, we obtained several images of astronomical objects for system performance tests.

• The Journal of Society for e-Business Studies
• /
• v.20 no.2
• /
• pp.73-91
• /
• 2015

Nowadays, 'books' are not limited to tangible items no longer, but can be intangible digital contents, along with advancement in e-Book technology and the growth of the markets. However, the role of e-Book viewers that links digital contents and readers has been rarely studied. In this study, therefore, we examined the effects of e-Book viewer's system quality (ease-of-use, functional diversity, interactivity) and design quality (convenient design, intuitive design, emotional design) on user satisfaction, and also tested if these relations are different by the content types (cartoon, novel, and learning contents). Research findings show that all the independent variables, except for interactivity, affect user satisfaction in overall groups. In viewing cartoon content, ease-of-use, convenient design, and emotional design were significant antecedents, and intuitive design and emotional design were found important factors in novel content, while functional diversity and interactivity affect user satisfaction in learning content. We expect these findings can provide useful insights to the providers of e-Book viewers.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.3 s.309
• /
• pp.76-83
• /
• 2006

A main objective of audio equalizer is for user to tailor acoustic frequency response to increase sound comfort and example applications of audio equalizer includes large-scale audio system to portable audio such as mobile MP3 player. Up to now, all the audio equalizer requires manual setting to equalize frequency bands to create suitable sound quality for each genre of music. In this paper, we propose an intelligent audio graphic equalizer system that automatically classifies the music genre using music content analysis and then the music sound is boosted with the given frequency gains according to the classified musical genre when playback. In order to reproduce comfort sound, the musical genre is determined based on two-step hierarchical algorithm - coarse-level and fine-level classification. It can prevent annoying sound reproduction due to the sudden change of the equalizer gains at the beginning of the music playback. Each stage of the music classification experiments shows at least 80% of success with complete genre classification and equalizer operation within 2 sec. Simple S/W graphical user interface of 3-band automatic equalizer is implemented using visual C on personal computer.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.8-14
• /
• 2020

Recently, there was an increasing demand for an integrated access control system which is capable of user recognition, door control, and facility operations control for smart buildings automation. The market available door lock access control solutions need to be improved from the current level security of door locks operations where security is compromised when a password or digital keys are exposed to the strangers. At present, the access control system solution providers focusing on developing an automatic access control system using (RF) based technologies like bluetooth, WiFi, etc. All the existing automatic door access control technologies required an additional hardware interface and always vulnerable security threads. This paper proposes the user identification and authentication solution for automatic door lock control operations using camera based visible light communication (VLC) technology. This proposed approach use the cameras installed in building facility, user smart devices and IoT open source controller based LED light sensors installed in buildings infrastructure. The building facility installed IoT LED light sensors transmit the authorized user and facility information color grid code and the smart device camera decode the user informations and verify with stored user information then indicate the authentication status to the user and send authentication acknowledgement to facility door lock integrated camera to control the door lock operations. The camera based VLC receiver uses the artificial intelligence (AI) methods to decode VLC data to improve the VLC performance. This paper implements the testbed model using IoT open-source based LED light sensor with CCTV camera and user smartphone devices. The experiment results are verified with custom made convolutional neural network (CNN) based AI techniques for VLC deciding method on smart devices and PC based CCTV monitoring solutions. The archived experiment results confirm that proposed door access control solution is effective and robust for automatic door access control.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.691-697
• /
• 2009

Hardware dedicated off-the-shelf maritime differential GPS RSIM lacks the open architecture to meet all the minimum maritime user requirements and to include future GNSS improvements after recapitalization. This paper carries out a study to replace existing hardware dedicated differential GPS RSIM with software differential GPS RSIM in order to make up the weak point of hardware dedicated off-the-shelf maritime differential GPS RSIM. In this paper, the architecture of software RSIM is proposed for maritime DGPS recapitalization. And the feasibility analysis of the proposed software differential GPS RSIM is performed as the first phase to realize the proposed architecture. For the feasibility analysis, the prototype RF module and DSP module are implemented with properties as wide RF bandwidth, high sampling frequency, and high speed transmission interface. This paper shows that the proposed architecture has the possibility of real time operation of software RSIM functionality onto the PC-based platform through the analysis of computation time. Finally, this paper verifies that the L1/L2 dual frequency software differential RSIM designed according to the proposed method satisfies the performance specifications set out in RTCM paper 221-2006-SC104-STD.

• Journal of East Asia Management
• /
• v.1 no.1
• /
• pp.65-87
• /
• 2020

In recent years, with the rapid development of network live streaming, with the popularization of mobile Internet and mobile terminal equipment, the live streaming industry has ushered in great development. A sudden outbreak of the COVID-19 makes the PC end live streaming which has been developed for many years enter a new era, giving birth to the rapid development of mobile end live streaming. Not only because of the expansion of the live streaming industry market, the rise of the trend of the national live streaming, but also because the mobile live streaming is more and more valued by the brand, becoming an important tool for brand communication and product promotion. It is because of its unique communication characteristics that some scholars believe that the era of precision marketing has been opened by live network. Mobile live from the initial fans to reward and promote the brand, to now in the form of live marketing, consumers can "buy while watching". The time period from the understanding of the goods to the final completion of the purchase behavior has been greatly shortened. It is conducive to improving sales volume and brand awareness. Marketing communication through mobile live platform has become a popular way of brand marketing. This paper mainly studies the current situation, methods, problems and development strategies of brand marketing activities with the help of live streaming platform under the background of mobile internet. Taking Tmall live streaming platform as an example, this paper analyzes several ways of brand marketing with the help of live streaming and some universal characteristics of live streaming marketing by using the relevant theories of marketing. In view of the problems existing in live streaming brand marketing, it puts forward relevant Improvement measures. First of all, the paper puts forward the innovation in content and form. Second, the paper suggests that we should make full use of new technologies such as AR and VR to effectively combine with mobile live broadcasting. Third, the paper explores the integration of multiple channels to create intelligent marketing, and further optimize the live interface of mobile terminals. Finally, the paper emphasizes that the government departments and the platform itself should jointly supervise the mobile network live streaming platform and establish a good live broadcasting environment for mobile terminals. With the help of mobile live streaming, the marketing mode has an important impact on the promotion of brand marketing. How to make better use of this business mode and accurately use mobile live broadcast to promote brand marketing, so that enterprises can create greater profits, is also of profound research significance.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1145-1156
• /
• 2002

We propose a web document transcoding technique that translates existing web pages designed for desktop computers into an appropriate form for hand-held devices connected to the wireless internet. By defining a content block based on a visual separation and using it as a minimum unit for analyzing and converting processes, we can get web pages converted more exactly. We also apply the reallocation of the content block and the generation of new index in order to provide convenient interface without left-right scrolling in small screen devices. These methods, compared with existing ways such as text level summary or partial extraction method, can provide efficient navigation and a full recognition of web documents. To gain those transcoding benefits, we propose the Layout-Forming Tag Analysis Algorithm that analyzes structural tags, which motivate visual separation and the Component Grouping Algorithm that extracts the content block. We also classify and rearrange the content block and generate the new index to produce an appropriate form of web pages for small display devices. We have designed and implemented our transcoding system in a proxy server and evaluated the methods and the algorithms through an analysis of transcoded results. Our transcoding system showed a good result on most of popular web pages that have complicated structures.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.12
• /
• pp.3275-3284
• /
• 1998

In this paper, we deseribe a Medical Image Information System. Our system stores and manages 5 dimensional medical image data and provides the 3 dimensional medical data via the Internet. The Internet standard VR format. VRML(Virtual Reality Modeling Language) is used to represent the 3I) medical image data. The 3D images are reconstructed from medical image data which are enerated by medical imaging systems such ans CT(Computerized Tomography). MRI(Magnetic Resonance Imaging). PET(Positron Emission Tomograph), SPECT(Single Photon Emission Compated Tomography). We implemented the medical image information system shich rses a surface-based rendering method for the econstruction of 3D images from 2D medical image data. In order to reduce the size of image files to be transfered via the Internet. The system can reduce more than 50% for the triangles which represent the surfaces of the generated 3D medical images. When we compress the 3D image file, the size of the file can be redued more than 80%. The users can promptly retrieve 3D medical image data through the Internet and view the 3D medical images without a graphical acceleration card, because the images are represented in VRML. The image data are generated by various types of medical imaging systems such as CT, MRI, PET, and SPECT. Our system can display those different types of medical images in the 2D and the 3D formats. The patient information and the diagnostic information are also provided by the system. The system can be used to implement the "Tele medicaine" systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.429-436
• /
• 2012

In this paper, an RFID system for the automatic preparation system of positron emission tomography (PET) radiopharmaceuticals is developed. Since the preparation system uses radioactive isotope, the preparation system is generally placed in lead-shielded hot-cell. Disposable cassettes including tubes and valves are used in the preparation system, since they are easily contaminated by radioactivity during preparation of radiopharmaceuticals. Currently, a system for preventing re-use of the cassette and managing the information about the preparation precess and result independently from the PC which control the preparation system is highly required for preventing danger from the radiation accident. Since RFID can store and re-write relatively large amount of information, it is suitable for the purpose. However, it is hard to read multiple cassettes' information using antennas installed on the metallic surfaces with current RFID systems. For the problem, we improve RFID system in two directions. First, the interface of the RFID reader is changed then it is possible that multiple readers can be daisy-chained. Also, antenna is tuned while inserting in a metallic coated antenna case, then the effect from the metallic surface of the preparation system is minimized. The test result using the developed system shows that the developed RFID system can read multiple tags using the antennas which are attached on the metallic surface.