• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.818-825
• /
• 2001

Polycarbonate(PC)/montmorillonite (MMT) nanocomposites were prepared by solution and melt mixing methods. A d-spacing of the nanocomposites was measured by an X-ray diffractometer. Neat montmorillonite (MMT-Na) and MMTs modified by dodecyl ammonium (MMT-DA) or dimethyl hydrogenated tallow 2-ethylhexyl ammonium (MMT-25A) were used. The d-spacing value of PC/MMT-25A and PC/MMT-DA was higher than that of PC/MMT-Na. The d-spacing increased from around 12 to $37AA$ depending on the mixing method. PC was more readily introduced to the gallery of MMT as the molecular weight of PC reduced and the mixing time increased. PC/MMT-25A showed higher thermal stability by thermogravimetric analysis (TGA) than PC/MMT-DA and PC/MMT-Na.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.1
• /
• pp.135-137
• /
• 2005

A PC-based automatic system was developed for automatic titration in volatile basic nitrogen analysis by the microdiffusion method. The system used a CCD-type PC camera for the automatic detection of the titration end point. The camera checked whether the green value of a pixel on the red image of titrated solution became greater than the red value. The data from the automatic titration using the system were not significantly different (p>0.05) from those taken by manual titration. The agreement between means of data from manual titration and those from automatic titration was good.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.407-413
• /
• 1997

The crystallized CuPc(copper phthalocyanine) film on a p-type <100> Si substrate is prepared at the substrate temperature of $300^{\circ}C$ by thermal evaporation. X -ray diffraction analysis showed the CuPc film to have a-axis oriented structure. For the measurement of photovoltaic characteristics of the CuPc/Si film and the Si substrate, a transverse current-voltage (I-V) curve is observed. In the dark, the Au/Si junction is shown to be ohmic contact. However, under illumination, a photovoltaic effect is not observed. The I-V curve in the dark indicates that the CuPc film on Si may form an ohmic contact. Since the CuPc film is a p-type semiconductor, the CuPc/p-Si junction has no barrier at the interface. Under illumination, the CuPc/Si junction shows a large photocurrent comparing with that of the wafer. The result indicates that the CuPc layer plays an important role in the photocarrier generation under red illumination (600 nm). The CuPc/Si film shows the photo voltaic characteristics with a short-circuit photocurrent ($J_{sc}$) of $4.29\;mA/cm^{2}$ and an open-circuit voltage ($V_{oc}$) of 12 mA.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.694-699
• /
• 1997

Normal-phase HPLC was used to separate the useful phospholipids, PE, PI and PC in soybean lecithin. The mobile phase used in this experiments were haxane, isopropanol and methanol, the gradient mode was applied as the three components could not be separated by the isocratic mode. To find the optimum separation condition, the concentration profiles of effluents were calculated from the plate theory and the capacity factor in step-gradient mode. From the calculated results, PE was separated with hexane/isopropanol/methanol = 90/5/5vol.% in isocratic mode and PI and PC were resolved in the conditions of 10min gradient time and the second mobile phase of hexane/isopropanol/methanol=50/20/30vol.% in step-gradient mode. The agreement between the calculated concentration profile and experimental data was good, so the methodology developed in this work can be used to obtain the optimum separation condition in gradient mode.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.569-576
• /
• 2006

PC-type copolymers were synthesized using MPEG(polyethylene glycol methyl ether methacrylate, Mn=2080) to different mole ratios of mono-carboxylic acid(AA : acylic acid). The mole ratios of AA were 2, 3, 4 and PC-type terpolymers were synthesized using mono-, dicarboxylic acid(ITA : itaconic acid MAL : maleic acid) with the same graft chain. To investigate effects of PC-type co-, ter-polymers on the hydration of cement experiments involving FT-IR, XRD, DSC, SEM have been analysed with cement paste specimens to 1, 3, 28 day. The hydration reaction rate of cement paste was slightly delayed at 1 day, due to increase in molar ratio of [AA]/[MPEG], it was recovered in the days after and the copolymer was more active than the terpolymer, because of low carboxylic acid content PC-type copolymers applied 2AA-type were fastest copolymer on hydration reaction of cement paste to 3 day and the more AA mole ratios increased, the more hydration was retarded.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.52-56
• /
• 2008

컴퓨터 시스템을 대상으로 하거나 컴퓨터 시스템을 이용하는 범행의 상당수가 PC방에서 이루어지고 있다. 그러나 불특정 다수의 네티즌들이 이용하는 PC방은 관리상의 용이 등의 이유로 대부분 하드디스크 초기화 프로그램(복원)을 사용하고 있으며, 이와 같은 PC방의 관리 환경은 수사의 직접적인 목적인 증거수집 및 복구을 통하여 실체적 진실발견에 많은 어려움을 초래하고 있다. 본 논문에서는 이와 같은 복원 프로그램의 동작원리를 분석하고, 이를 바탕으로 인터넷 접속기록의 효율적인 복원 방법에 대한 논리적인 접근법을 제시하고, 프로그램 구현을 통한 정확한 디지털 증거수집의 실접근법을 제공한다.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.110-112
• /
• 2003

본 논문에서는 확률적인 전역 최적화 알고리즘인 유전 알고리즘과 경험적인 최적화 알고리즘인 타부 탐색법을 병렬화함으로써 최적해 탐색성능 및 탐색속도를 개선하는 방안을 개발하였다. 배전계통의 주변압기에서 고장이 발생한 경우에는 여러 정전구역에 대한 복구문제가 되어 매우 복잡하고 많은 연산량을 수반한다. 따라서 제안한 고장복구 알고리즘은 PC 클러스트링을 이용하여 각 프로세서별로 유전 알고리즘 또는 타부 탐색법을 사용하여 최적해를 탐색한 후 일정 기간 이후에 해를 교환함으로써 배전계통에서의 주변압기 고장발생시 최적해 탐색에 소요되는 시간을 단축하였으며 고장복구 지원시스템의 성능개선을 도모하였다. 제안한 알고리즘의 유용성을 입증하기 위하여 한전의 실 배전계통 주변압기 고장복구 문제에 적용함으로써 제안한 알고리즘이 해의 탐색속도 및 해의 성능면에서 우수함을 입증하였다.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.193-198
• /
• 2008

Now days with the significant grows of internet and PC hardware/software, most of the business, include small size business and soho, is worked by PC/Network. However these critical changes, all the PC/Network system or service is identical and these make user a inconvenient experience and unpleasant aspect to PC/Network. This research is to segment the user bases on the user context of using PC and all this segmentation was done in contextual design process. From Contextual Interview, all data of user context of environment, use case, needs, voices, break downs were captured and these data were interpreted and filtered to affinity notes and user modeling. After the interpretation, the consolidation was being held by affinity diagram, which could make ready to segment the user. For the result, 3 segmentation was evaluated and which are the 'Holistic Networker', 'Unplugged Controller' and 'Passive Reactor'.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.24-33
• /
• 2004

Advances in remote sensing technologies are resulting in the rapid increase of the number of spectral channels, and thus, growing data volumes. This creates a need for developing faster techniques for processing such data. One application in which such fast processing is needed is the dimension reduction of the multispectral data. Principal component transformation is perhaps the mostpopular dimension reduction technique for multispectral data. In this paper, we discussed the processing procedures of principal component transformation. And we presented and discussed the results of the principal component transformation of the multispectral data. Moreover principal components image data are classified by the Maximum Likelihood method and Multilayer Perceptron method. In addition, the performances of two classification methods and data reduction effects are evaluated and analyzed based on the experimental results.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.11 no.1
• /
• pp.103-122
• /
• 1993

A cause and counterplan of the increase in dark decay rate of$\varepsilon$-CuPc/PVCz photoreceptor which is consist of the carrier generation layer (CGL) of$\varepsilon$type copper phthalocyanine ($\varepsilon$-CuPc) thin film by an aqueous coating method and the carrier transport layer (CTL) of polyvinylcarbazol (PVCz) by spin coating, are studied in this paper. Electrochemical deposition of CGL was accompanied by an increase in work function of the aluminium substrate during the processes and the enhanced work function 5.3 eV rose above the ionization potential 5.16 eV of $\varepsilon$-CuPc. This resulted in the increased injection of holes from substrate into CGL and a fast dark decay rate. Improved photoreceptor, an electron-transport $\varepsilon$-CuPc/TNF photoreceptor, led to lowing of dark decay rate and increasing of photosensitivity. The carrier generation efficiency (ηg), carrier injection efficiency (ηi) and xerographic gain (G) of the $\varepsilon$-CuPc/TNF photoreceptor were obtained by XTOF method and PIDC.