• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.177-178
• /
• 2020

In the construction industry, expectations for the Precast Concrete(PC) construction method are rising due to demands for high quality and productivity and social and environmental issues. However, although technical problems that occurred in the early stages of technology introduction have been solved, research related to proper construction management for PC construction methods has been relatively neglected and the advantages of PC construction methods have not been fully utilized. In this study, each group involved in PC works was surveyed to identify important management tasks affecting productivity of PC works to improve PC contruction management system. Based on factor analysis, 22 tasks were calssified into 5 management groups. The results of this study will be used to present a framework for the application of automation and information technology to improve the productivity of PC works.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.293-294
• /
• 2023

In accordance with recent changes in construction trends, interest in introducing the OSC, such as the Precast Concrete, is increasing in apartment buildings. In domestic studies, studies on the prediction of the construction period of PC apartment buildings through simulation have been conducted, but there is no study on the comparison of the construction period according to the actual construction of Precast Concrete(PC) and Reinforced Concrete(RC). Therefore, this study seeks to grasp the technology of the current PC construction method and to secure the original technology of project management through comparison of the absolute time of frame construction for PC and RC buildings composed of the same plane.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.96-97
• /
• 2013

PC(Precast Concrete) technology has been widely used for reduction of construction period and manpower in domestic construction industry since it was introduced from advanced countries in the 1960s. But most of existing researches are shortage of research which proves the efficiency of PC methods quantitatively. Therefore, this study analyzed productivity targeting construction site workers who are working on projects using the PCF(Precast Concrete Frame) system out of PC methods that is used most typically in construction sites, and in order to provide basic data to prove the efficiency of PC project quantitatively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.163-164
• /
• 2009

Recently, RC construction method has needs of many construction expenses and previous by accessory construction progress in construction field. On the other hand, Shell PC column reduces construction expenses and previous. Therefore, the purpose of this study is to the analyze the economical propriety about Centrifugal Formed Shell PC columns application of a field as compared with the RC and PC construction method.

• 정보화사회
• /
• s.6
• /
• pp.20-25
• /
• 1988

정보통신은 PC통신에 의해 꽃피워질 것이다. 특히 퍼스컴이 일반 전화망에 접속될 경우 그 이용도는 전화만큼이나 높아질 것이며, 활용은 부가가치 서비스에 의해 고도화될 것이다. 현재 정보통신이 앞서가는 나라들은 PC통신을 어느 정도 궤도에 올려놓고 있다. 우리 나라에서도 한국전기공사가 전화망을 이용한 퍼스컴통신을 계획하고 있어 PC통신에 대한 기대가 고조되고 있다. 비약적 발전이 기대되는 Pc통신과 망구성과 망의 종류, 이를 통한 서비스 내용들을 알아본다.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.89-100
• /
• 2022

The development of the Construction Production Rates System for appropriate construction cost calculation has recently come to the fore as a means of invigorating OSC based PC structure which currently needs institutional frameworks. PC structure based construction expenses consist of the factory-built assembly, transportation and on-site installation. Recently, in the field of transportation and site installation, research on product structure development is being conducted, such as presenting the standard product calculation system reflecting the results of field survey for each subsidiary materials (Lee et al., 2021). On the other hand, there is no ongoing research on estimating construction expenses of Factory-built assembly. This study suggests Construction Production Rates System which can be used for PC subsidiary materials based Factory-built assembly cost estimations. For the research, work types for the construction procedures have been categorized, and the standard input manpower suitable for the corresponding work characteristics has been derived from analyzing the associated Construction Standard Production Rates for each work type. Also, as the research referred PC subsidiary materials (such as columns, beams, walls, and slab, as well as on-site installation) and the standard number of workforce based on work types, one can calculate direct labor cost, using what the research shows. In addition, it suggests that the size of individual subsidiary materials be the extra cost factor, by using the characteristics that productivity changes depending on the size(m³) of subsidiary materials. It is expected that the research can contribute to objectively verifying factory-built assembly cost through of PC structure, which currently relies on estimates.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.34-42
• /
• 2012

Green frame technology intended to facilitate the remodeling of apartment housing complexes in Korea and extend their service life has been developed. Green frame design is a Rahmen structure using composite precast concrete members and, unlike a bearing-wall structure, lifting and installing structural members accounts for major steps of structural construction. Therefore, if green frame structure construction is to be scheduled appropriately, systematic lifting plan needs to be developed in advance. Development of lifting plan also requires unit lifting process of composite PC members (columns and beams) that consist of green frame to be analyzed first. Therefore, this study attempts to analyze the lifting process of composite PC members used in green frame structure. To that end, lifting procedure and time of composite PC column and beam are estimated and applied to a project case to analyze the lifting cycle of reference floor. Outcomes produced herein will be used as key data for development of lifting plan in subsequent green frame structure construction.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.96-106
• /
• 2021

The PC structure based on the OSC (Off-Site Construction) is mentioned as a representative method of innovation in the construction industry that converts the existing construction environment from site-centered to factory production-transportation-site assembly. However, recent research on PC method has focused on improving the functions of subsidiary materials and improving the production system to increase productivity and institutional / policy R&D that can be universally applied to the life-cycle stage of ordering / design /construction is insufficient. In particular, the absence of standardized cost calculation standards makes it difficult to calculate and verify of objectified appropriate construction cost. So which is an obstacle to the activation of the PC method. In this study, the standards for construction costs of domestic and foreign PC method were surveyed and similar Construction Standard Production Rates were analyzed to confirm the product structure suitable for PC method. Subsequently, the construction procedures and input resources for each PC subsidiary materials were identified through on-site surveys to derive component for subsidiary materials, and the factors of change in the product according to the construction characteristics(height, weight of subsidiary material) were verified. As a result the standard product calculation system suitable for the site installation of the PC method for apartment was presented.

• 월간 기계설비
• /
• s.295
• /
• pp.57-68
• /
• 2015

내전 후 전쟁 상처를 복구 중에 있는 이라크는 주택, 인프라, 사회 서비스망 구축의 필요에 따라 지난 2010년 이라크 기획청(Ministry of Planning, MOP)이 이라크의 삶의 질 개선을 위한 국가개발계획(Iraq National Development Plan, 2010 ~ 2014)을 수립하고 15개 주정부와 쿠르드 자치정부 지역에 100만호 주거 시설 제공을 위한 국가 주택 프로그램을 발표했다. 이에 따라 2017년까지 주택과 교통인프라, 에너지, IT, 의료, 보안 등에 걸쳐 총 2,750억불(약 300조원)을 이라크 재건사업에 투자할 계획이다. 또 2030년까지는 에너지 분야에 5,000억불 투자 등 정유공장, 발전소, 도로, 인프라, 공공시설 및 군시설 등 다양한 분야에 최소 7,000억불에 달하는 예산을 투입할 예정이다. 한화건설은 지난 2012년 80억 달러 규모의 이라크 비스마야 신도시 건설공사를 수주해 우리나라 해외건설 역사상 최대 규모의 프로젝트 기록을 세웠다. 또한 이 계약으로 우리나라 해외건설 누적 수주액 5,000억 달러 돌파에 크게 기여했다. 윤창기공(주)(대표 백종윤)는 비스마야 현장에서 PC 플랜트 현장의 기계설치공사와 하우징 현장의 기계설비 및 소방공사를 담당하고 있다. 본지는 이라크 현장에 있는 윤창기공(주) 정몽준 소장과 김용우 소장을 이메일로 만나 보았다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.95-96
• /
• 2023

The purpose of this study is to derive the limitations of the existing management system by analyzing the characteristics of the PC process to improve the PC construction project management system process. To overcome the limitations derived, we present a process of managing integrated information from the design-production-construction stage using QR codes and clouds. This is expected to help develop a PC construction project management system.