• Journal of the Korean institute of surface engineering
• /
• v.19 no.1
• /
• pp.13-19
• /
• 1986

Manganese in the Anode slime and the paste-positive material of waste-dry cell was recovered by leaching with the hydrochloric acid solution. The impurities (Zn, Fe, Pb), co-leached with manganese were removed from the leached solution prior to electrolysis by hydrometallurgical techniques such as the neutralization with ammonium hydroxide and cementation on manganese powder. The electrodeposition of manganese from the purified chloride solution with sodium selenate was performed. Cathode current efficiency was found to be affected significantly by the concentration of sodium selenate and ammonium chloride salt, bath temperate, current density and PH. The current efficiency of about 88.7% was obtained by electrolysis manganese chloride solution with sodium selenate (0.1/g) at 10$^{\circ}C$.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.119-124
• /
• 2013

Generally, the characteristic of nanofiltration membranes were catagorized into charged membrane, sieve effect, interaction between membarnes and target solutes. This study aims to investigate the effect item of heavy metal separation with view of charge nanofiltration membranes. The experiments of nanofiltration were conducted by nanofiltration set-up with operational pressure of 0.24 MPa at $25^{\circ}C$ by using synthetic wastewater containing 0.1mg/L of Cr, Fe, Cu, Zn, As, Sn, Pb. Nanofiltration membranes rejected heavy metals much better than chloride, sulfate and TOC, of which concentration in synthetic wastewater was higher than that of heavy metals. To consider rejection characteristics of various metals by nanofiltration membranes, separation coefficient, which is the molar conductivity ratio of the metal permeation rate to the chloride ion or TOC permeation rate, was introduced. In spite of different materials and different nominal salt rejection of nanofiltration membrane used, the separation coefficients of metals were nearly the same. These phenomena were observed in the relationship between the molar conductivity and the separation coefficient for heavy metals.

• Current Research on Agriculture and Life Sciences
• /
• v.5
• /
• pp.81-88
• /
• 1987

This study was conducted to determine the contents of heavy metals in Jeotkals (salted-fermented fish and shellfishes) and to investigate the major factor of their contamination. The results were as follows : Average contents of heavy metals in Jeotkals were Hg 0.076 ppm, Pb 0.677 ppm, Cd 0.112ppm, As 1.025ppm, Cu 3.540ppm, Zn 11.230ppm and Mn 2.041ppm, those in fish and shellfishes were Hg 0.051ppm, Pb 0.425ppm, Cd 0.071ppm, As 0.632ppm, Cu 2.ppm, Zn 8.052ppm, Mn 1.178ppm and Hg ND, Pb 0.05ppm, Cd 0.01ppm, As 0.02ppm, Cu 0.087ppm, Zn 0.068ppm and Mn 0.044ppm in salts. During the fermentation of the salted anchovy (Engraulis Japonicus) in each containers, the contents of Hg and Cd had little difference with control, but Pb was high in pottery and iron container and As was in iron and regenerated plastic container. During the fermentation of the salted anchovy in iron container, the contents of heavy metals increased and was to determined more at the later stage of fermentation than at the early stage. Most contents of heavy metals increased in elution experiment of containers, but Hg and Cd did not detected. The concentration of salt did not affect to the elution of heavy metals.

• Resources Recycling
• /
• v.10 no.5
• /
• pp.36-43
• /
• 2001

The chlorine component in fly ash from municipal solid waste incineration ash was removed by water washing for the purpose of recycling fly ash as a raw material of ordinary portland cement. The samples were a different kind of 리y ashes using $Ca(OH)_2$and NaOH as media of wet scrubber for flue gas cleaning. The content of soluble salts of fly ash using $Ca(OH)_2$and NaOH was 32.8%, 50.1% and the content of chlorine component, 22.9% and 26.0% respectively, which was KCl, NaCl, CaC1OH mainly. When each fly ash was washed using water under conditions of a agitation speed of 300 rpm, a liquid to solid ratio of 10, most soluble salts in fly ash were dissolved within 30 minutes and the content of chlorine component in ash was diminished to the content of 4.4%, 2.O% at $20^{\circ}C$ and 1.7%, 0.8% at $50^{\circ}C$ respectively. And the main compound of residual chlorine component in ash after water washing was friedel`s salt ($3CaO.A1_2$$O_3$.$CaCl_2$.$10H2$O). From analysis results of water quality for wastewater by water washing, the components exceeding discharged wastewater standard were only Pb and Cd. But As pH was controlled to 10 with addition of $CO_2$(g) or $Na_2$$_CO3$in water, the concentration of heavy metals such as Pb and Cd was also under discharged wastewater standard.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.773-778
• /
• 1993

Poly(vinyl chloride)(PVC) membrane electrodes based on the lipophilic neutral carrier, dibenzo-18-crown-6(DB18C6) and benzo-15-crown-5 (B15C5) as the active sensors for Tl$^+$ ion have been prepared and tested in different content of the potassium tetrakis(4-chlorophenyl)borate (KTClPB) as lipophilic salt. Dioctyl adipate (DOA), 2-nitrophenyl phenyl ether (NPPE) and o-nitrophenyl actyl ether (NPOE) were used as plasticizing solvent mediators. Electrodes exhibited good linear responses of 40∼55 mV decade$^{-1}$ for Tl$^+$ ion within the concentration ranges 10$^{-1}$∼10$^{-5}$M TlNO$_3$. Selectivity coefficients of interfering ions (alkali metal, alkaline earth metal and some transition metal ions) for Tl$^+$-ISE were determined by separate solution method and were sufficiently small for most of them. These crown ether type ion-selective electrodes are suitable for use with aqueous solution at pH > 3.

• Journal of Environmental Science International
• /
• v.26 no.11
• /
• pp.1297-1306
• /
• 2017

This study identified physical characteristics and aerosol particle sources of $PM_{10}$ and $PM_{2.5}$ in the industrial complex of Busan Metropolitan City, Korea. Samples of $PM_{10}$, $PM_{2.5}$ and also soil, were collected in several areas during the year of 2012 to investigate elemental composition. A URG cyclone sampler was used for collection. The samples were collected according to each experimental condition, and the analysis method of SEM-EDX was used to determine the concentration of each metallic element. The comparative analysis indicated that their mass concentration ranged from 1% to 3%. The elements in the industrial region that were above 10% were Si, Al, Fe, and Ca. Those below 5% were Na, Mg, and S. The remaining elements (1% of total mass) consisted of elements such as Ni, Co, Br and Pb. Finally, a statistical tool was applied to the elemental results to identify each source for the industrial region. From a principal components analysis (SPSS, Ver 20.0) performed to analyze the possible sources of $PM_{10}$ in the industrial region, five main factors were determined. Factor 1 (Si, Al), which accounted for 15.8% of the total variance, was mostly affected by soil and dust from manufacturing facilities nearby, Factors 2 (Cu, Ni), 3 (Zn, Pb), and 4 (Mn, Fe), which also accounted for some of variance, were mainly related to iron, non-ferrous metals, and other industrial manufacturing sources. Also, five factors determined to access possible sources of $PM_{2.5}$, Factor 1 (Na, S), accounted for 13.5% of the total variance and was affected by sea-salt particles and fuel incineration sources, and Factors 2 (Ti, Mn), 3 (Pb, Cl), 4 (K, Al) also explained significant proportions of the variance. Theses factors mean that the $PM_{2.5}$ emission sources may be considered as sources of incineration, and metals, and non-ferrous manufacturing industries.

• Korean Journal of Community Nutrition
• /
• v.7 no.6
• /
• pp.833-843
• /
• 2002

This study was carried out to investigate the effect of hygiene education on the microbiological changes of processing utensils and the environmental in the manufacture of cereals and to evaluate the Cd, Pb contents and nutrient compositions of 11 cereals. The result of microbiological evaluation was that fungi, coliforms and staphylococcus species were detected in employees, on equipment, utensils and environments in the first inspection. Fungi were detected in most of the cereals, staphylococcus species were detected in soybeans, perilla seeds and sea tangle How, and bacillus cereus was detected in sorghum and black sesame seeds. The water content of rice, barley, glutinous rice, brown rice and carrot flour in packaged products, and in carrot flour, angelica keiskei, carrot, sea mustard and potato in bulk products was in excess of 8.0%. The Pb content of cereals was 0.14-0.51 mg/kg and Cd was not found. The acid value of Job s tears flour and black sesame seed flour was higher than 5.0 mg/g oil. Cereals were manufactured from 41 different cereals and grains, legumes, seeds and nuts, vegetables, potatoes, seaweeds, fruits, glucose and salt. The average content of cereals and grains, legumes, and seeds and nuts in cereals was 75.75%, 16.19% and 4.93%, respectively. The mean nutrient content per 100 g of cereals was calories 365.8kcal, protein 13.3 g, fats 5.9 g, carbohydrates 63.4 g, Ca 91.8 mg, p 269.9 mg, Fe 3.15 mg, Na 76.2 g, K 421.8 mg, Zn 2.33 mg, Vit. A 12.5 R.E., Vit. B$_1$0.23 mg, Vit. $B_2$ 0.16 mg, Vit. $B_6$ 0.46 mg, Niacin 3.5 mg, Vit. C 1.36 mg, folic acid 62.3 $\mu$g and Vit. E 1.24 mg. When nutrients value of 48 g of cereals and 200 $m\ell$l of milk was compared to 1/3 of the RDA, the values were below than 60% of 1/3 of the RDA except Na, K, Vitamin $B_1$ and C contents. The average carbohydrate : protein : fat ratio of energy intake was 54.27 : 17.45 : 28.28, respectively. Therefore, a training program consisting of the education of the staff in surveillance and standard operating procedures, the elimination of dangerous procedures, sanitation checklist, the implementation of Preparation methods and standard recipes for cereals is required.

• Ocean and Polar Research
• /
• v.44 no.4
• /
• pp.297-310
• /
• 2022

To understand the chemical composition of aerosols in the Cheju-Korea Straits and their contribution to the ocean by deposition, aerosol samples were collected on board R/V Eardo from November 1997 to May 1999. The average concentrations of Al, NO₃^-, non-sea-salt (nss)-SO₄^2-, and NH₄⁺ in aerosols were 2.19, 5.59, 6.16 and 2.08 ㎍ m^-3, respectively. The Al concentration in the high yellow dust period was about 100 times higher than that in the non-yellow dust period. The concentration ratio of NO₃^-/nss-SO₄^2- ranged between 0.47 and 1.5, indicating that the aerosols in the Cheju-Korea Straits are under the effects of NO_x and SO_x emitted from China, Korea and Japan. The equivalent concentration ratio of [NH₄⁺]/[nss-SO₄^2-+ NO₃^-] with the average of 0.58±0.29 indicates that nss-SO₄^2- and NO₃^- are not neutralized by NH₄⁺. A high activity concentration of ²¹⁰Pb with 1.13-1.23 mBq m^-3 was observed during the high yellow dust period, indicating that ²¹⁰Pb is easily adsorbed in the yellow dust originating from the continent of Asia. The distribution of ⁷Be and NH₄⁺ concentrations showed a strong negative linear correlation during the low yellow dust period, April 1998. The total mineral dust flux in the Cheju-Korea Straits was estimated to be 1.21×10⁶ tons yr^-1, accounting for about 12% of the annual sediment discharge via the Nakdong River. The combined annual deposition of NH₄⁺ and NO₃^- was 0.103 mole N m^-2 yr^-1 was estimated to support 4% of the annual primary productivity in the East China Sea.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.4
• /
• pp.31-37
• /
• 2001

Deicers have used for melting snow on the road during winter season, but they have largely influenced on environment and public assets and human health. The pollution level of snow and soil contained deicer was analyzed and evaluated the characteristics of deicers. The results were as follows 1. In the result of measurement of pollutants in snow contained deicer, the pH was a little higher than a comparative group and the concentration of $Cl^{-}$ ranged from 0.5% to 0.87%, and the electric conductivity ranged 12.4 to 24.6 mmho/cm. The concentration of Cd, As, and Hg was not detected, but those of Cu, Pb, Cr was higher than a comparative group. 2. In soil of the road spreaded with deicer, the pH is getting alkalized and the concentration of $Cl^{-}$ was high in January and returned the level of a comparative grout) in November by physical and chemical reaction with deicer, but the concentration of heavy metals were not connected with deicers. 3. In comparison of deicing efficiency, the concentration of $Cl^{-}$ was 3.3~5times high in spreading with deicer before snowing than after snowing. The concentration of $Cl^{-}$ in NaCl was higher than $CaCl_2$, but the deicing efficiency of Nacl was better than that of $CaCl_2$. Moreover, the new deicer have no salt, but deicing efficiency of new deicer was less than that of NaCl and $CaCl_2$.

• Journal of Environmental Science International
• /
• v.13 no.4
• /
• pp.435-440
• /
• 2004

The thiophene or furan-containing hexadentate ligands 1, 12-bis (2-theophene )-2,5,8,ll-tetraazadodecane(Thiotrien ㆍ 4HCl) and 1,12-bis (2-furan)-2,5,8,11-tetraazadodecane(Furatrienㆍ4HC1) were synthesized as their tetrahydrochloride salt and characterized by EA, IR, NMR, and Mass spectrum. Their protonation constants (logK$_{nH}$) and stability constants (logK$^{M}_{L}$ for Cd$^{2+}$, Pb$^{2+}$, $Zn^{2+}$ and Cu$^{2+}$ ions were determined in aqueous solution by potentiometry and compared with 1, 12-bis(2-pyridyl)-2,5,8, 11-tetra-azadodecane(Pytrien) of pyridyl-containing ligand. The effect stability constants of ligands and metal ion for removal of heavy metals in aqueous solution were described.