• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.3
• /
• pp.47-54
• /
• 1996

In this paper, the band pass filter was designed and constructed for personal communication services of information facilities. For the band pass filter design, after dielectric resonator structures were analyzed. J-inverter design theory and its simulation method were studied. The parameters obtained from design theory were practically applied to filter construction. The simulation results are well agreed with the measured result of constructed filter after fine tunings.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.56-59
• /
• 2002

In this study, new serial and parallel resistor and capacitor-frequency-dependent negative resistance configurations are implemented that use one plus type four-terminal floating nullor(FTFN) and three passive components. The values of simulated elements can be orthogonally adjusted without any matching condition. High pass filter designed with this FTFN and AD844. Computer simulation was performed using the AD844 macro model by HSPICE. Simulated results agree well with theoretical values.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.203-206
• /
• 2004

Wegmann's method has been known as the most efficient one for the Theodorsen equation that is needed to solve conformal mapping. It was researched in the earlier studies (1). However divergence was revealed in some difficult problems by numerical experiment using Wegmann's method. We analyzed the cause of divergence and proposed an improved method by applying a low frequency pass filter to Wegmann's method. Numerical experiments using the improved method showed convergence for all divergent problems using the Wegmann's method. In this paper, we prove theroretically the cause of convergence in the Numerical experiment using the improved method by applying a low frequency pass filter to Wegmann's method. We make use of Fourier transforms in this theoretical proof of convergence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1196-1200
• /
• 2009

This paper proposed a tunable band pass filter. It is two-poles direct capacitive coupled resonator band pass filter which the capacitors of parallel resonators are changed by varactor diodes. The DC bias controls to change the value of capacitance in the parallel resonator for tunning the pass band. To validate the proposed design method, we fabricated the band pass filter which has tunable center frequency from 200MHz to 245MHz.

• Korean Journal of Remote Sensing
• /
• v.19 no.6
• /
• pp.447-456
• /
• 2003

This study investigated the method for obtaining 3-dimensional terrain information on inaccessable areas by evaluating geometric accuracy of the EOC pass image and scene image acquired from the KOMPSAT-1 satellite. For this purpose, the following four experiments were conducted to evaluate the accuracy of the KOMPSAT-1 EOC satellite data. 1) Calculation of ground coordinates by using ancillary data and image coordinates on Level 1R that were processed by the pre-processing system of KOMPSAT-1. 2) Calculation of 3-dimensional ground coordinates from the ground coordinates of stereo images calculated by using ancillary data, based on space intersections. 3) Execution of bundle adjustment by using GCP (Ground Control Point) extracted in a part of the stereo pass image (KOMPSAT-1 EOC, 1 scene size); and then, evaluation of the ground coordinates from the calculated exterior orientation. 4) Evaluation of accuracy by applying the exterior orientation calculated from 3) To the whole pass image.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.4
• /
• pp.25-30
• /
• 1971

Fabrication and measurements of the magnetically tunable YIG band pass or stop filter at X-band are discussed. Using two YIG spheres located at the region of r-f circularly polarized magnetic field between the strip lines, the pass or stop characteristics of the filter are obtained. In the case of band stop, the output level is typically 25db lower than the input power. Contrarily for the pass band, the pass band level is 22db higher than the stop frequency region. The experimental results are in good agreement with the theoretical values of FMR. Further it is shown that the structure can be used for a directional coupler.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.271-277
• /
• 2013

Skin pass rolling is a very important process for applying a certain elongation to a strip in the cold rolling and annealing processes, which play an important role in preventing the stretching of the yield point when the material is processed. The exact prediction of the rolling force is essential for obtaining a given elongation with the steel grade and strip size. Unlike hot rolling and cold rolling, skin pass rolling is used to apply an elongation of within 2% to the strip. Under a small reduction, it is difficult to predict the rolling force because the elastic deformation behavior of the rolls is complicated and a model for predicting the rolling force has not yet been established. Nevertheless, the exact prediction of the rolling force in skin pass rolling has gained increasing importance in recent times with the rapid development of high-strength steels for use in automobiles. In this study, the possibility of predicting the rolling force in skin pass rolling for producing various steel grades was examined using foil rolling theory, which is known to have similar elastic deformation behavior of rolls in the roll bite. It was found that a noncircular arc model is more accurate than a circular model in predicting the roll force of high-strength steel below TS 980 MPa in skin pass rolling.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.2
• /
• pp.68-72
• /
• 2002

In this study, I studied on the principle of OTA and it's basic application. Here, I designed second order filter using OTA. This filter has three inputs and one output. If we use each one input among them, we can get a low pass, high pass and band pass output. In the result of the computer simulation. the linear characteristics was superior to the conventional Op-Amp filter. And this circuit is advantageous to making an IC. This will be used to the communication system which has the low distortion and high frequency circuit. This study will have to be continued to form a higher order filter using OTA.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.6
• /
• pp.14-20
• /
• 1975

Characteristics of coupled trigonometric transmission lines (CTTL) are studies based on the theory of general coupled nonuniform transmission lines. First, the 4-port transmission matrix parameters of networks and directional couplers using CTTL. The phase slrift characteristic of the all-pass networks and the magnitude characteristic of the directional couplers are studied in detail for various coupling and a high-pass small ripple directional coupler using CTTL are given and their physical realization is considered.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.43-49
• /
• 2014

This paper presents a theoretical study of transmission performance for an optical duobinary transmitter employed a Mach-Zehnder modulator and a electrical low pass filter at 40Gbps optical communication links. It depends on the bandwidth of the low pass filter in the transmitter, the optical filter and the filter in the receiver. Also, each filter affected to the various parts of the optical power spectrum. By optimizing the bandwidth of each filter, we could control the side robes and the ripples and improve the dispersion tolerance of the transmission system.