• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.57-68
• /
• 2000

The Power Augmented Ram(PAR) effect, which blows the down stream of the propellers into the underside of the wings and hence increases the pressure between the lower surface of the wings and the sea surface, is known significantly to enhance the performance of the WIG concept by reducing the take-off and landing speeds. The aerodynamic characteristics of a 20 passenger PARWIG are investigated by wind tunnel tests with the 1/20 scale model. The efflux of the forward mounted propellers are simulated by jet flows with a blower and duct system. The lift, drag, and pitch moment of the model with various ground clearances, angles of attack and flap angles are measured for the various jet velocities, jet nozzle angles, horizontal and vertical positions of the nozzle, and the nozzle diameters. The aerodynamic characteristics of the PARWIG due to these parametric changes are compared and pertinent discussions are included. It is shown that the proper use of the PAR can increase the lift coefficient of as much as up to 4.

• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.371-378
• /
• 2016

An aim of current study was to investigate the prevalence and the mechanism of quinolone-resistance in E. coli isolates obtained from chicken cecum in Korea. In addition, multilocus sequence typing (MLST) was also performed for the molecular characterization of E. coli isolates. In an antimicrobial susceptibility test by the disk diffusion method, the 63.5% (54/85) of E. coli isolates showed the resistance to quinolone group of antimicrobial agents. All of the 54 E. coli isolates showing resistant to quinolone group had sense mutations in gyrA gene and point mutations at the $57^{th}$, $80^{th}$, or $84^{th}$ residues in parC gene were detected in 90.7% of the isolates. Interestingly, E. coli ST was closely related to amino acid substitutions in parE gene. Our results indicated that the long-term use of antimicrobial agents in food-producing animals was strongly associated with a prevalence of antimicrobial resistance in commensal Enterobacteriaceae, suggesting the need for continuous surveillance and monitoring of antimicrobial resistant determinants in bacterial isolates from food animals.

• Journal of Korean Physical Therapy Science
• /
• v.17 no.1_2
• /
• pp.41-52
• /
• 2010

Purpose: The purpose of this study was to compare the effects of continuous passive motion(CPM) and continuous active motion(CAM) on proprioception of the knee after total knee replacement(TKR). Methods: Twenty patients with TKR were randomly allocated into two groups, the CPM group(n=10) and the CAM group(n=10). All subjects were evaluated for levels of pain, passive range of motion and angle reproduction of the knee. An angle reproduction test was used to assess the proprioceptive deficit. Two types of angle reproduction test were used: a passive angle reproduction(PAR) test and an active angle reproduction(AAR) test. The relevant examinations were performed before and after intervention(on the 5th day and the 10th day). The statistical significance were calculated using a t-test and a one-way repeated ANOVA. Results: A pre-intervention significant difference was not found between the two groups. Significantly better results were before and after the intervention at 10 days, for the PAR(flexion direction) test; however, only in the CAM group. There were no significant difference, either before or after the intervention, for the AAR test(flexion and extension direction) in both group. Both groups experienced similar levels of pain and passive range of knee motion before and after the intervention. Conclusion: This study revealed that CAM was a better effect to restore position sense of the knee joint after TKR.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.4
• /
• pp.157-170
• /
• 2008

In this paper, we described the Parwan(PAR-1) CPU that be developed as a reduced processor at Messachusetts Microelectronics Center using a VHDL at the behavioral level and then described by connecting CPU components at the dataflow level. Finally, we used Test-bench method to simulate and verify execution of CPU processor that was designed using a VHDL <중략> Here, Presented method was to enable information exchange of design and representation of operation were very exact and simple. Also, a documentation of design was available and it was easy that verify a operation of designed processor. The behavioral description of VHDL aids designer as we verify our understanding of the designed system, thus the dataflow description can be used to verify the bussing and register structure of the design.

• Structural Engineering and Mechanics
• /
• v.58 no.2
• /
• pp.327-345
• /
• 2016

Many experimental and analytical studies have been conducted with beam-column subassemblages composed of a two-span beam to investigate the progressive collapse resistance of RC frames. Most study results reveal a strength-decreased transition phase in the nonlinear static load-deflection curve, which may induce dynamic snap-through response and increase the chord rotation demand for effective catenary action (ECA). In this study, the nonlinear static response is idealized as a piecewise linear curve and analytical pseudo-static response is derived for each linearized region to investigate the rotation demands for the ECA of the two-span RC beams. With analytical parameters determined from several published test results, numerical analysis results indicate that the rotation demand of 0.20 rad recommended in the design guidelines does not always guarantee the ECA. A higher rotation demand may be induced for the two-span beams designed with smaller span-to-depth ratios and it is better to use their peak arch resistance (PAR) as the collapse strength. A tensile reinforcement ratio not greater than 1.0% and a span-to-depth ratio not less than 7.0 are suggested for the two-span RC beams bridging the removed column if the ECA is expected for the collapse resistance. Also, complementary pseudo-static analysis is advised to verify the ECA under realistic dynamic column loss even though the static PAR is recovered in the nonlinear static response. A practical empirical formula is provided to estimate an approximate rotation demand for the ECA.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.14 no.2
• /
• pp.87-92
• /
• 2007

Twenty - four elite mulberry germplasm each of indigenous and exotics were studied for their leaf yield and compared with commercial check ($V_1$ and Kosen). Accession MI-0416 and ME-0169 out yielded the check accession in leaf yield/plant. The other few mulberry germplasm were also performed at par with the checks. For quality test and bioassay were conducted with the leaves of selected mulberry germplasm. Among the selected twelve mulberry accessions used for bioassay, MI-0376 and ME-033 performed better than check ($V_1$, Kosen). Other mulberry accessions i.e., MI-0310 and MI-0437 are on par with the check as far as the bioassay is concerned. MI-0376 and ME-0033 out yielded in rearing parameters and qualified for 11 and 10 rearing and related traits. Other mulberry accessions i.e., MI-0310 and MI-0437 were also qualified for eight rearing traits along with check ($V_1$). The mulberry accessions tested after selection from the preliminary characterization seems to be better and equally good in rearing and leaf yield compared to check ($V_1$, Kosen), which provides scope for selection and further evaluation. The selected mulberry accession may be included in crop improvement programme.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.94-100
• /
• 2011

Purpose: Basal/Acetazolamide-challenged brain perfusion SPECT is very useful to assess cerebral perfusion and vascular reserve. However, as there is a trade off between sensitivity and spatial resolution in the selection of collimator, the selection of optimal collimator is crucial. In this study, we examined three collimators to select optimal one for 1-day brain perfusion SPECT. Materials and Methods: Three collimators, low energy high resolution-parallel beam (LEHR-par), ultra resolution-fan beam (LEUR-fan) and super fine-fan beam (LESFR-fan), were tested for 1-day imaging using Triad XLT 9 (TRIONIX). The SPECT images of Hoffman 3D brain phantom filled with 99mTc of 170 MBq and a normal volunteer were acquired with a protocol of 50 kcts/frame and detector rotation of 3 degree. Filterd backprojection (FBP) reconstruction with Butterworth filter (cut off frequencies, 0.3 to 0.5) was performed. The quantitative and qualitative assessments for three collimators were performed. Results: The blind tests showed that LESFR-fan provided the best image quality for Hoffman brain phantom and the volunteer. However, images for all the collimator were evaluated as 'acceptable'. On the other hand, in order to meet the equivalent signal-to-noise ratio (SNR), total acquisition time or radioactivity dose for LESFR-fan must have been increased up to almost twice of that for LEUR-fan and LEHR-par. The volunteer test indicated that total acquisition time could be reduced approximately by 10 to 14 min in clinical practice using LEUR-fan and LEHR-par without significant loss on image quality, in comparison with LESFR-fan. Conclusion: Although LESFR-fan provides the best image quality, it requires significantly more acquisition time than LEUR-fan and LEHR-par to provide reasonable SNR. Since there is no significant clinical difference between three collimators, LEUR-fan and LEHR-par can be recommended as optimal collimators for 1-day brain perfusion imaging with respect to image quality and SNR.

• Korea-Australia Rheology Journal
• /
• v.16 no.4
• /
• pp.219-226
• /
• 2004

In this study the deformation of liquid-air interface of Newtonian or Boger fluids filled between two par­allel-plates geometry was investigated when two surfaces were separated at a constant speed. The interface between the fluid and air showed either stable or unstable deformation depending on experimental con­ditions. Repeated experiments for a wide range of experimental conditions revealed that the deformation mode could be classified into three types: 'stable region', 'fingering' and 'cavitation'. The experimental condition for the mode of deformation was plotted in a capillary number vs. Deborah number phase plane. It has been found that the elasticity of Boger fluids destabilize the interface deformation. On the other hand, the elasticity suppresses the formation and growth of cavities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.51-59
• /
• 2010

In this paper, we propose an inverted type asymmetric Doherty amplifier with optimized efficiency characteristic in wanted output power back-off (OPBO) range according to peak to average power ratio of input signal In order to obtain optimized efficiency of the asymmetric Doherty amplifier in wanted OPBO, peak power ratio between main amplifier and peaking amplifier was determined and then impedance of 90 degrees impedance transformer was obtained by peak power ratio. The offset line length and peak dividing ratio of the asymmetric Doherty amplifier were also calculated. From the measurement results, the proposed amplifier has achieved 40 % drain efficiency and -35 dBc adjacent channel leakage ratio at the average output power of 48.7 dBm for CDMA 2000 1x 3-FA test signal.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.1
• /
• pp.37-46
• /
• 2012

Objectives : This research was investigated to evaluate the psychological characteristics and changes of psychological state among dental orthodontic patients. Methods : This cross-sectional questionnaire research was conducted with 230 dental orthodontic patients in Busan from December 23, 2009 to March 6, 2010. The psychological analysis of dental orthodontic treatment patients was performed with Symptom checklist-90-revision(SCL-90-R) considering 5 general characteristics and 2 treatment period related characteristics. Estimated psychological results were changed T-score. Data analysis was performed with descriptive analysis, t-test and ANOVA using SAS(ver 9.1) program. Results : The levels of T-score of SCL-90-R were $43.88{\pm}7.50$ in hostility(HOS), $43.38{\pm}4.64$ in phobic anxiety(PHOB), $43.20{\pm}6.24$ in somatization(SOM), $42.13{\pm}6.71$ in paranoid ideation(PAR), $41.39{\pm}8.16$ in interpersonal sensitive(I-S), $41.01{\pm}7.90$ in obsessive-compulsive(O-C), $40.96{\pm}5.37$ in psychoticism(PSY), $40.96{\pm}5.19$ in anxiety(ANX) and $39.81{\pm}6.80$ in depression(DEP), respectively. The T-score of phobic anxiety in before treatment group was higher than that of treatment groups. The T-score of interpersonal sensitive and paranoid ideation in over 36 months treatment period group were higher than that of other treatment period groups. Conclusions : Phobic anxiety(PHOB), interpersonal sensitive(I-S) and paranoid ideation(PAR) were affected in pre-treatment and long-term treatment dental orthodontic patients. Psychological management methods considering treatment period are needed to improve mental health of dental orthodontic patients.