• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.7-12
• /
• 2004

Desalination system of revers osmosis(RO) membrane has been proven to be the most economical not only for the desalination of water containing salts, but also for the concentration of solute. RO membranes were traditionally made of inorganic polymers such. as cellulose acetate(CA), Polyamide(PA). To retain more minerals in deep ocean water, a new hybrid membrane composed of tourmaline film as organic material onto inorganic layer of CA polymer in asymmetric structure was developed for RO membrane process. The performance tests were carried out in the permeability of pure water and the rejection of NaCl solution to evaluate the adaptability for DOW desalination. The results of these basic tests show possibility to apply the new hybrid RO membrane for the desalination with function control.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3348-3354
• /
• 2011

Oleanolic acid (OA) as template molecule, polyamide-6 (PA6) as basement membrane and poly(styrene-comaleic acid) (PSMA) were used to prepare PA6/PSMA-OA molecularly imprinted composite membranes by phase inversion method in supercritical $CO_2$ ($ScCO_2$). The template molecule (OA), [poly(styrene-co-maleic anhydride) (PSMAH), PSMA, molecularly imprinted membranes (MIMs) imprinting OA and MIMs after elution were all characterized by Fourier transform infrared spectroscopy (FTIR). The conditions that were the mass ratio between PSMA and OA from 3:1 to 8:1, temperature of $ScCO_2$ from $35^{\circ}C$ to $50^{\circ}C$ and pressure of $ScCO_2$ 12 MPa to 17 MPa were studied. It was obtained the largest adsorption rate and purity of OA after adsorption of the resultant MIMs, 50.41% and 96.15% respectively. After using PA6 film and non-woven fabrics as basement membrane respectively, it was found that smaller aperture of PA6 was used as basement membrane, a higher adsorption rate and a higher purity of OA after adsorption of the MIMs were obtained, and so were the stability and reproducibility of the resultant MIMs. After template molecules being removed, the MIMs had effective selectivity hydrogen bonding to separately bind in the binary components to the template molecules-oleanolic acid.

• 한국식품위생안전성학회지
• /
• 제25권1호
• /
• pp.36-42
• /
• 2010

식품유사용매 중 EDA 및 HMDA 분석법을 확립하고, 국내유통 재질 조리기구 124건에 대하여 식품유사용매별 이행량을 조사하였다. EDA 및 HMDA를 ethyl chloroformate로 디우레탄 유도체화한 후 GC/FID로 정량 또는 GC/MS로 확인하였다. 확립된 분석방법은 EDA 및 HMDA 각각에 대하여 LOD $0.3\;{\mu}g/mL$ 및 $0.1\;{\mu}g/mL$이었으며, 상판계수($r^2$) 0.999이상의 직선성 및 식품유사용매별로 88% 이상의 회수율을 확인할 수 있었다. 확립된 정량분석방법을 적용하여 식품유사용매별 이행량을 조사한 결과, EDA는 식품유사용매로 물을 사용한 경우 2품목에서만 각각 $1.31\;{\mu}g/mL$ 및 $2.06\;{\mu}g/mL$ 수준으로 검출되었으며, 나머지는 모두 불검출이었다. HMDA는 식품유사용매로 20% 에탄올을 사용한 경우 3 품목에서 $0.27{\sim}0.93\;{\mu}g/mL$, n-헵탄을 사용한 경우 10 품목에서 $0.26{\sim}0.44\;{\mu}g/mL$으로 검출되었으며, 나머지는 모두 불검출이었다. 본 연구에서 확인된 이행량은 유럽연합의 EDA 및 HMDA 각각의 이행기준인 $12\;{\mu}g/mL$ 및 $2.4\;{\mu}g/mL$과 비교 시 매우 낮은 수준이었다.

• 한국포장학회지
• /
• 제22권3호
• /
• pp.95-102
• /
• 2016

본 연구에서는 진공포장재의 산소투과도와 저장온도에 따른 햄버그스테이크의 저장성과 품질변화를 조사해 보고자, PA/PE필름에 진공포장 후 냉장 저장($5^{\circ}C$)한 대조구(C)와 EVOH/PE 공중합필름에 진공포장후 냉장 저장($5^{\circ}C$)한 T1구, 그리고 PA/PE필름에 진공포장 후 냉동 저장($-18^{\circ}C$)한 T2 구로 나누어 처리하였다. T1구는 저장기간이 경과함에 따라 총균수와 Brochothrix thermosphacta균의 성장이 C구와 유사하게 이루어졌다. 그러나, Pseudomonas균은 T1구가 C구에서보다 유의적으로 낮은 균수를 보였다. VBN값은 C구에서 가장 빨리 증가하였고, 그 다음으로 T1과 T2의 순이었다. TBARS값은 T2구에서 다른 구에 비하여 저장 4일째부터 낮았고, T1 시료는 T2 시료보다 저장 14일째 낮게 나타났다. 처리구간 기계적 색도 값은 저장기간 중 일관된 변화 및 시료간 차이를 나타내지 않았다. 기계적 경도 값은 저장기간 중 지속적으로 증가하는 경향을 보였다. T1구 시료는 C구에 비하여 풍미와 이취항목에서 2일 정도 품질이 더 우수하게 유지되는 것으로 평가되었으며, 냉동시료의 경우에는 해동 후 조직감이 12일 후 상품성 기준인 5.0 미만으로 평가 되었다. 전체적 선호도는 저장 6일까지는 C 시료, 8일부터 12일까지는 T1 시료, 그리고 14일에는 T2 시료가 가장 높았다. 결론적으로, EVOH/PE 공중합필름과 같은 산소고차단성 포장재를 냉장 햄버그스테이크에 사용할 경우 풍미나 이취 등 관점에서 저장수명을 증대시키는 효과가 나타났으나, 14일 이상 장기간 저장이 요구될 경우에는 $-18^{\circ}C$에서의 냉동 보관이 추천된다.

• The Journal of Advanced Prosthodontics
• /
• 제15권2호
• /
• pp.55-62
• /
• 2023

PURPOSE. The aim of this study is to evaluate the accuracy of removable partial denture (RPD) frameworks produced using different digital protocols. MATERIALS AND METHODS. 80 frameworks for RPDs were produced using CAD-CAM technology and divided into four groups of twenty (n = 20): Group 1, Titanium frameworks manufactured by digital metal laser sintering (DMLS); Group 2, Co-Cr frameworks manufactured by DMLS; Group 3, Polyamide PA12 castable resin manufactured by multi-jet fusion (MJF); and Group 4, Metal (Co-Cr) casting by using lost-wax technique. After the digital acquisition, eight specific areas were selected in order to measure the Δ-error value at the intaglio surface of RPD. The minimum value required for point sampling density (0.4 mm) was derived from the sensitivity analysis. The obtained Δ-error mean value was used for comparisons: 1. between different manufacturing processes; 2. between different manufacturing techniques in the same area of interest (AOI); and 3. between different AOI of the same group. RESULTS. The Δ-error mean value of each group ranged between -0.002 (Ti) and 0.041 (Co-Cr) mm. The Pearson's Chi-squared test revealed significant differences considering all groups paired two by two, except for group 3 and 4. The multiple comparison test documented a significant difference for each AOI among group 1, 3, and 4. The multiple comparison test showed significant differences among almost all different AOIs of each group. CONCLUSION. All Δ-mean error values of all digital protocols for manufacturing RPD frameworks optimally fit within the clinical tolerance limit of trueness and precision.

• 한국의학물리학회지:의학물리
• /
• 제28권3호
• /
• pp.100-105
• /
• 2017

The purpose of the present study was to develop and evaluate patient-customized helmets with a three-dimensional (3D) printer for radiation therapy of malignant scalp tumors. Computed tomography was performed in a case an Alderson RANDO phantom without bolus (Non_Bolus), in a case with a dental wax bolus on the scalp (Wax_Bolus), and in a case with a patient-customized helmet fabricated using a 3D printer (3D Printing_Bolus); treatment plans for each of the 3 cases were compared. When wax bolus was used to fabricate a bolus, a drier was used to apply heat to the bolus to make the helmet. $3-matic^{(R)}$ (Materialise) was used for modeling and polyamide 12 (PA-12) was used as a material, 3D Printing bolus was fabricated using a HP JET Fusion 3D 4200. The average Hounsfield Unit (HU) for the Wax_Bolus was -100, and that of the 3D Printing_Bolus was -10. The average radiation doses to the normal brain with the Non_Bolus, Wax_Bolus, and 3D Printing_Bolus methods were 36.3%, 40.2%, and 36.9%, and the minimum radiation dose were 0.9%, 1.6%, 1.4%, respectively. The organs at risk dose were not significantly difference. However, the 95% radiation doses into the planning target volume (PTV) were 61.85%, 94.53%, and 97.82%, and the minimum doses were 0%, 77.1%, and 82.8%, respectively. The technique used to fabricate patient-customized helmets with a 3D printer for radiation therapy of malignant scalp tumors is highly useful, and is expected to accurately deliver doses by reducing the air gap between the patient and bolus.