• Journal of the Korean Chemical Society
• /
• v.39 no.7
• /
• pp.552-558
• /
• 1995

The tetranuclear complexes, $X_2[M_{O4}O_12{R'C(NH_2)NO}_2](X= n-Bu_4N^+$, $R'=(CH_3)_2CH$, $CH_3CH_2CH_2$, $CH_3SCH_2$; $X=(CH_3)_2CHC(=NH_2)NH_2^+$, $R'=(CH_3)_2CH$; $X = CH_3CH_2CH_2C(=NH_2)NH_2^+$, $R'=CH_3_CH_2CH_2$; $X=CH_3SCH_2C(=NH_2)NH_2^+$, $R'=CH_3SCH_2)$ have been synthesized by the reactions of monomeric and polynuclear complexes with isobutyl-, butyl- and thiomethylacetamidoxime. The prepared complexes were identified by elemental analysis, infrared, $^1H$ NMR and $^{13}C$ NMR spectroscopy. The structure of complex ${(CH_3)_2CHC(NH_2)_2}_2[M_{O4}O_{12}{(CH_3)_2CHC(NH_2)NO}_2]$ was determined by X-ray single crystal diffraction. Crystal data are follows: Monoclinic, $P2_{1/c}$, $a=10.168(3){\AA}$, $b=11.768(1){\AA}$, $c=13.557(1){\AA}$, ${\beta}=102.08(1)^{\circ}$, $V=1586.2(5){\AA}^3$, Z=2, final R=0.026 for 2951($F_0>3s(F_0)$). This complex is composed of a planar cyclic $[Mo_4({\mu}-O)_4]$ and two ${\mu}_4$-amidoximate.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3279-3282
• /
• 2010

The reaction rates of 4-X-2,6-dinitrochlorobenzenes (X = $NO_2$, CN, $CF_3$) with Y-substituted benzylamines (Y = p-$OCH_3$, p-$CH_3$, H, p-Cl) in MeOH-MeCN mixtures were measured by conductometry at $25^{\circ}C$. It was observed that the rate constant increased in the order of X = $NO_2$ > CN > $CF_3$ and in the order of Y = p-$OCH_3$ > p-$CH_3$ > H > p-Cl. When the solvent composition was varied, the rate constant increased in the order of 100% MeOH < 50% (v/v) MeOH-MeCN < 100% MeCN. These results may be ascribed to the formation of hydrogen bonds between the alcoholic hydrogen and nitrogen of benzylamines in groud state (GS). We conclude that the reaction takes place via $S_NAr$ base on the transition state parameters ${\rho}x$, ${\rho}Y$, $\beta_{nuc}$, and solvent effects.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.17-20
• /
• 2000

We have enhanced the yield of 0.25 ${\mu}{\textrm}{m}$ T-gate $Al_{0.25}$G $a_{0.75}$As/I $n_{0.2}$G $a_{0.8}$As P-HEMT using three-layer E-beam lithography process and selective etching process. The three-layer resist structure (PMMA/copolymer/ PMMA=2000 $\AA$/3000 $\AA$/2000 $\AA$) and three developers (Benzene：IPA=1：1,Methanol：IPA =1：1,MIBK：IPA=1：3) were used for fabrication of a wide-head T-gate by the conventional double E-beam exposure technology. Also 1 wt% citric acid： $H_2O$$_2$：N $H_{4}$OH(200m1：4ml：2.2ml) solution were used for uniform gate recess. The etching selectivity of GaAs over $Al_{0.25}$G $a_{0.75}$As is measured to be 80. So these P-HEMT processes can be used in X-band MMIC LNA fabrication.ion.ion.ion.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.648-657
• /
• 1997

In order to investigate the polymorphism of wagnerite, the single phase of$Mg_3(PO_4)_2$ was synthesized by heating the stoichiometric mixture of $Mg_3(PO_4)_2$ and $MgF_2$ in a sealed platinum tube at $1040^{\circ}C$ (or 3 hours, One reversible inversion was detected at $1255^{\circ}C$ and the thermal decomposition was not observed until it reached the melting point. As a result, wagnerite is thermally stable enough to be used as pigments for glazes and plastics if substituted with divalent metal ions. The contractions of d-values in $Zn_4P_2O_8F_2$ and $Zn_3MgP_2O_8F_2$ phases were observed by the substitution with metal ions which resulted in intense purple, gold and green colors. Among the several attempts of charge - coupled sub-stitution, only $A^{1+}A_3^{2+}X^{5+}X^{6+}O_8_F2$ compositions were successful to synthesize the wagnerite phase.

• Korean Journal of Veterinary Research
• /
• v.38 no.4
• /
• pp.730-736
• /
• 1998

To elucidate whether or not innervation of purinergic nerve and functional action of $P_{2X}$-, $P_{2Y}$-purinoceptor, the neurogenic effects of perivascular nerve stimulation were investigated using by physiograph recording system in isolated coronary artery of pig. 1. The contractile responses induced by perivascular nerve stimulation (20V, 0.5msec, 20sec) were the frequency (2~64Hz) dependent manner. 2. The neurogenic contractile responses induced by perivascular nerve stimulation were inhibited by the pretreatment with either ATP or adenosine ($10^{-7}{\sim}10^{-4}M$). 3. The neurogenic contractile responses induced by perivascular nerve stimulation (20V, 16Hz, 0.5msec, 20sec) were increased by the pretreatment with reactive blue 2, but were not affected by the pretreatment with 8-phenyltheopylline ($10^{-5}M$). 4. The neurogenic contractile responses induced by perivascular nerve stimulation (20V, 16Hz, 0.5msec, 20sec) were inhibited by the desensitization of the P2X-purinoceptor using by treatment of $10^{-5}M$, -methylene ATP as 3 times over again. The accomplished present study on isolated coronary artery of pig suggest that purinergic nerve is innervated and that the neurogenic contractile response was mediated by activation of $P_{2X}$-purinoceptor and the neurogenic relaxative response was mediated by activation of both $P_1$ and $P_{2Y}$-purinoceptor.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.251-258
• /
• 2010

Purpose: To evaluate the effect of surface conditioning on the shear bond strength of zirconium-oxide ceramic to 4 luting agents. Materials and methods: A total of 120 diskshaped zirconium-oxide ceramic blocks (3Y-TZP, Kyoritsu, Japan) were treated as follows: (1) Sandblasting with $110\;{\mu}m$ aluminum-oxide ($Al_2O_3$) particles; (2) tribochemical silica coating (Rocatec) using $110\;{\mu}m$ $Al_2O_3$ particles modified by silica; (3) no treatment. Then zirconium-oxide ceramic blocks bonded with 4 luting cements (RelyX luting (3M ESPE), Maxcem (Kerr), Nexus3 (Kerr), Rely X Unicem (3M ESPE)). Each group was tested in shear bond strengths by UTM. A 1-way analysis of variance and 2-way analysis of variance was used to analyze the data ($\alpha$ = .05). Results: RelyX unicem in combination tribochemical silica-coating produced a highest bond strength (P < .05). Air abrasion group and Rocatec treatment groups resulted in significantly higher than no conditioning group (P < .05). RelyX Luting groups showed lower bond strength than other groups. There were significant differences among groups (P < .05). Conclusion: Within the limitation of this study, RelyX Unicem cement provided the highest bond strength and Rocatec treatment enhanced the bond strength.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.5
• /
• pp.299-308
• /
• 2023

In this study, phosphorus (P)-doped nickel cobaltite (P-NiCo₂O₄) and nickel-cobalt layered double hydroxide (P-NiCo-LDH) were synthesized on nickel (Ni) foam as a conductive support using hydrothermal synthesis. The thermal properties, crystal structure, microscopic surface morphology, chemical distribution, electronic state of the constituent elements on the sample surface, and electrical properties of the synthesized P-NiCo₂O₄ and P-NiCo-LDH samples were analyzed using thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS). The P-NiCo₂O₄ electrode exhibited a specific capacitance of 1,129 Fg^-1 at a current density of 1 Ag^-1, while the P-NiCo-LDH electrode displayed a specific capacitance of 1,012 Fg^-1 at a current density of 1 Ag-1. When assessing capacity changes for 3,000 cycles, the P-NiCo₂O₄ electrode exhibited a capacity retention rate of 54%, whereas the P-NiCo-LDH electrode showed a capacity retention rate of 57%.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.367-376
• /
• 2002

Electrical conduction in $SrZr_{1-x}Y_xO_{3-\delta}$((x=0.05, 0.10)-metal electrode system was investigated by impedance spectroscopy and two-probe d.c. conductivity measurement. Electrode conductivity in anodic direction varies with $P_W^{1/2}$( and that in cathodic direction with $P_{O2}^{1/4}$ in oxidizing atmosphere. In hydrogen atmosphere, the addition of water vapor increased the electrode conductivity both in anodic and cathodic direction. Increasing dopant concentration from 5 to 10% showed a more than four times increase in anodic conduction as well as bulk conduction of the solid electrolyte. This observation implies that unfilled oxygen vacancy concentration increases rapidly as the dopant content increases in humid atmosphere. The activation energy of cathodic conduction in Pt and Ag electrode was nearly same below $800^{\circ}C$ which means the rate of cathodic reaction is determined by the reaction in the electrolyte surface rather than on the metal electrodes.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.111-121
• /
• 2007

The experimental design and response surface methodologies haven been applied to the investigation of the chemical coagulation of livestock wastewater. The chemical coagulation reactions were mathematically described as a function of parameters raping mixing (rpm) of chemical coagulation ($X_1$), slow mixing (rpm) of chemical coagulation ($X_2$), $FeCl_3 $ concentration (mg/L) ($X_3$) and pH ($X_4$) being modeled by use of the central composite design. Empirical models were developed to describe relationship between the experimental variables and response. Statistical analysis indicates that three factors ($X_1$: raping mixing (rpm), $X_2$: slow mixing (rpm), $X_3$: $FeCl_3 $ concentration (mg/L) on the linear term (main effect), slow mixing (rpm) (${X_2}^2$) on the non-linear term (quadratic), and two factors ($X_1-X_3$, $X_2-X_3$) on the non-linear term (cross-product) had significant effects, respectively. The estimated ridge of maximum responses and optimal conditions for CODcr using canonical analysis was 87.44% ($X_1$: 229 rpm, $X_2$: 51 rpm, $X_3$: 877 mg/L, $X_4$: 4.3). To confirm this optimum condition, three additional experiments were performed and the mean CODcr removal (%) and concentration (mg/L) with a standard deviation of $87{\pm}1.2%$ ($576{\pm}34ppm$) were obtained.

• Journal of applied mathematics & informatics
• /
• v.20 no.1_2
• /
• pp.75-96
• /
• 2006

Let m, n be positive integers. We denote by R(m,n) (respectively P(m,n)) the class of all groups G such that, for every n subsets $X_1,X_2\ldots,X_n$, of size m of G there exits a non-identity permutation $\sigma$ such that $X_1X_2{\cdots}X_n{\cap}X_{\sigma(1)}X_{/sigma(2)}{\cdots}X_{/sigma(n)}\neq\phi$ (respectively $X_1X_2{\cdots}X_n=X_{/sigma(1)}X_{\sigma(2)}{\cdots}X_{\sigma(n)}$). Let G be a non-abelian group. In this paper we prove that (i) $G{\in}P$(2,3) if and only if G isomorphic to $S_3$, where $S_n$ is the symmetric group on n letters. (ii) $G{\in}R$(2, 2) if and only if ${\mid}G{\mid}\geq8$. (iii) If G is finite, then $G{\in}R$(3, 2) if and only if ${\mid}G{\mid}\geq14$ or G is isomorphic to one of the following: SmallGroup(16, i), $i\in$ {3, 4, 6, 11, 12, 13}, SmallGroup(32, 49), SmallGroup(32, 50), where SmallGroup(m, n) is the nth group of order m in the GAP [13] library.