• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.147-155
• /
• 2016

Pulp made from sugarcane bagasse (SCB) was bleached in element chlorine free (ECF) sequence. The peroxide bleaching process for the final bleaching process has been introduced in order to reduce the use of chlorine dioxide. Prior to peroxide bleaching, different chelating chemicals were applied. When 4.5% of the total chlorine dioxide was used, bleached SCB pulp using additional DTPA chelate stage (DEDQP) resulted in 87.0% of the ISO brightness. However, bleached pulp using simultaneous stage of DTPA chelate and chlorine dioxide (DE(DQ)P) was reached at 83.9% of the ISO brightness. The viscosity of DEDQP bleached pulp was 25.6 cPs, and the one of DE(DQ)P bleached pulp was 21.9 cPs. Decreasing of chelate effect by chlorine dioxide led to a decrease in the final brightness and a lower viscosity. But simultaneous stage of EDTA chelate and chlorine dioxide (DE(DQ)P) led to higher final brightness (87.0% ISO) and higher viscosity (25.8 cPs) than those of the $DEDQ_{EDTA}P$ bleached pulp (86.4% ISO, 25.2 cPs).

• Economic and Environmental Geology
• /
• v.41 no.6
• /
• pp.695-708
• /
• 2008

In order to evaluate the geochemical behaviors of elements with waste rocks in the abandoned Jangpoong Cu mine area, total concentration analysis and leaching experiments were performed. The content of elements within waste rocks compared with background values decreased in order of As>>Cu>Pb>Cd>Co. Leaching experiments were carried out at various extraction environments, considering the acid rain ($0.00001{\sim}0.001N\;HNO_3$) and the acid mine drainage ($0.001{\sim}0.1N$ HNO3). After 24 hours of reaction with different acidic solution, the leaching characteristics of waste rocks were classified into three types according to final pH of leaching solution. Type I refers to the case that the final pH of leaching solution was lower than that of the reaction solution due to the dissolution of acidic minerals from rocks, while type 2 and 3 refer to the case that the final pH maintained higher than that of the reaction solution. Theses types include in acid buffering minerals such as clay minerals and carbonate minerals. The leaching characteristics of the elements after the reaction could be categorized into As-Co-Fe, Cu-Mn-Cd-Zn, and Pb. As-Co-Fe started to get leached under 2.5 of pH regardless of changes in the final pH, and Cu-Mn-Cd-Zn showed different initial leaching pH according to the types of final pH changes. Based on the pH value where leaching started regardless of leaching concentration, the relative mobility of each element was in the order of Mn Zn>Cd>Cu>>Fe Co>As>Pb. Thus, more higher mobility elements(Zn, Mn and Cu) were leached by reacting with acid rain water. Acid mine drainage may result in distributions of elements having relatively less mobility(As, Fe, Co and Pb).

• Proceedings of the Korean Geotechical Society Conference
• /
• 1987.06a
• /
• pp.51-80
• /
• 1987

In this studys a numerical analysis on the defomation of foundation layer was carried out by indroducing joint element. The method using the joust element between adj assent different materials has been originally developed for rock behavior(Goodman, et al. 1968) . The application of this method to the interface between the footing and soil layer proved satisfactory(Ghaboussi p et at. 1973). Authors tried to obtain the deformation of rrcompound foundation layerg", which vertically or horizontally or both consists of the natural(or intact) soft clay layer and the layer improved artificially in order to get high stiff-fness with replacement or chemical treatment to reduce the excessively detrimental settlemellt or lateral displacement in case of banking or building the civil structure on the soft layer. The joint conditions were classified into three categories : contacts sliding and separation. By coupling "JOINT" as a subroutine into multi-purpose code for the finite element method of the foundatlion daveloped by authors on the assumption that shearing and normal displacement can not be coupledl which terms pinon-dilatant" and by selecting modified Cam-clay modeIP the deformation analysis was performmed. The results using joint element were compared with those secured without introduction of joint element Nain results analized are as follows : 1. For the prediction of settlement and lateral desplacement, the result due to joint element was evaluated larger, which was regarded safe. 2. For the determination of ultimate bearing capacetyi the value using joint element appeared smaller by 20%, which was also safe.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.2
• /
• pp.137-145
• /
• 2009

Purpose : To compare 12 and 32-element surface coil arrays for highly accelerated coronary magnetic resonance angiography (MRA) using parallel imaging. Materials and Methods : Steady state free precession coronary MRA was performed in 5 healthy volunteers at 1.5 T whole body MR scanner using both 12 and 32-element surface coil arrays. Left anterior descending and right coronary artery data sets were acquired for each volunteer. Data sets were sub-sampled for parallel imaging using reduction factors from 1 to 6. Mean geometry factor (g-factor), maximum g-factor, and artifact level were calculated for each of the two coil arrays. Results : Over all reduction factors, the mean and maximum g-factors and artifact level were significantly reduced using the 32-element array compared to the 12element array (P << 0.1). The mean g-factor was sensitive to the imaging orientations of coronary arteries while the maximum g-factor and artifact level were independent of orientation. Conclusion : The 32-element surface coil array significantly improves artifact and noise suppression for highly accelerated coronary MRA using parallel imaging. The increased acceleration factors made feasible with the 32-element array offer the potential to enhance spatial resolution or increase volumetric coverage for 3D coronary MRA.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.4
• /
• pp.217-232
• /
• 2007

The Puu Oo eruption in Hawaii since 1983 is one of the largest eruptions on Hawaii's volcanic history with prominent compositional variation ($5.6{\sim}10.1wt.%$ in MgO content). Although intense researches of Hawaiian eruption have been conducted for recent years, there is no up-to-date study on Puu Oo lavas that is erupting hot lavas today. in oder to obtain basic information on the geological characteristics of the eruption including any noticeable change in its petrological trend and magma dynamics, we applied several geological approaches such as field survey, systematic sampling, petrography, mineralogy, and geochemistry. Clinopyroxene and Plagioclase phenocrysts are rarely observed on the thin section, however Olivine crysts are much more obvious in the study area. It indicates that Puu Oo is early stage of magma differentiation. Variation diagram of whole rock composition shows that the elements such as $TiO_2,\;Al_2O_3,\;SiO_2$ and $Na_2O$ decrease with increasing MgO. In the trace element Sr, Y Zr and V versus $K_2O$, P18, P19 samples are plotted in primitive area. Variations of the Ni contents during $2003{\sim}2006$ may suggest a sudden change in magma composition probably caused by new magma injection.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.6
• /
• pp.893-904
• /
• 2006

To improve sensitivity of biosensor as yeast two-hybrid detection system for estrogenic activity of suspected chemicals, we tested effects of several combinations of the bait and fish components in the two-hybrid system on Saccharomyces cerevisiae inducted a chromosome-integrated lacZ reporter gene that was under the control of CYC1 promoter and the upstream Gal4p-binding element $UAS_{GAL}$. The bait components that were fused with the Gal4p DNA binding domain are full-length human estrogen receptor ${\alpha}$ and its ligand-binding domain. The fish components that were fused with the Gal4p transcriptional activation domain were nuclear receptor-binding domains of co-activators SRC1 and TIF2. We found that the combination of the full-length human estrogen receptor ${\alpha}$ with the nuclear receptor-binding domain of co-activator SRC1 was most effective for the estrogen-dependent induction of reporter activity among the two-hybrid systems so far reported. The relative strength of transcriptional activation by representative natural and xenobiotic chemicals was well correlated with their estrogenic potency that had been reported with other assay systems.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.11a
• /
• pp.122-134
• /
• 2005

XRF, EDX, IR analysis was conducted to figure the effect of Fe to blacken the waterlogged wood. The results showed that investigated soil contained more Fe than normal soil by XRF analysis and wood ash contained more sulfur and Fe than any other element by EDX analysis. C-H and C-O peaks were significantly reduced at the surface of wood where is blackened part of waterlogged wood by IR analysis. The optimum condition to remove Fe from waterlogged wood by EDTA was investigated. To do this, removed concentration of Fe was measured at various concentration of EDTA-2Na. The optimum pH of EDTA-2Na was figured to be 4.1 to 4.3 and as the concentration of EDTA was increasing, extracted concentration of Fe was also increased. In the case of 0.4 wt% of EDTA-2Na, 700ppm of Fe was eliminated and was stabilized after 48 hours time lapse. In the case of EDTA-3Na, the optimum pH was 7 to 8, and 10 ppm of Fe was eliminated at 0.4 wt% of EDTA-3Na. In the case of EDTA-4Na, the optimum pH was 10 to 11, and 120 ppm of Fe was eliminated at 0.4 wt% of EDTA-4Na.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.3
• /
• pp.43-53
• /
• 2008

Purpose : This study was designed to examine physiological changes in the body of rescuers conduct CPR according to the 2005 new guideline from American Heart Association. The ratio of artificial respiration has changed from 15 : 2 into 30 : 2 in 2005. The researcher tried to know the correlation between the physiological changes and the accuracy of CPR. Method : The examinees of this study were 26 students (Dept. of Emergency Medical Service). After the training, participants conducted 10 minute CPR and soon after the CPR, their vital signs were checked, and lactic acid and concentration of ammonia were analysed from their blood samples. Questionnaires to ask their subjective fatigue level were filled out after blood samples and 10 minute - CPR was performed. Results : 1) After the CPR, concentrations of ammonia were $149.71{\mu}{\ell}/d{\ell}$ and $162.17{\mu}{\ell}/d{\ell}$ in 15 : 2 and 30 : 2, respectively. The number was higher in 30 : 2 but it wan not statistically meaningful (p = .493). Log value of lactic acid was a little higher in 30 : 2 with 42 log($mmol/{\ell}$) and 54 log($mmol/{\ell}$) in 15 : 2 and 30 : 2, respectively but it was not statistically meaningful (p = .113). 2) Blood pressure in 15 : 2 and 30 : 2 were 118.50 mmHg and 125.08 mmHg while pulse in two different cases were 96.14 and 97.25, showing no statistically significant differences (blood pressure : p = .155, pulse : p = .841). 3) Subjective fatigue was a bit high in 30 : 2 with 5.93 and 6.92 points in 15 : 2 and 30 : 2 respectively but it was not statistically meaningful (p = .142). 4) In the 10 minute CPR, respiration accuracy was 96.21% in 15 : 2 and 94.79% in 30 : 2. There was no statistical significances between the two(p = .225). In the meanwhile, chest compression accuracy was 92.57% in 15 : 2 and 91.83% in 30 : 2. From the beginning to the end of chest compression, there showed no difference(p = .425). the type of CPR did not influence upon the accuracy of chest compression(p = .756). Conclusion : In the CPR conducted by skilled rescuers for 10 minutes, there were no statistically meaningful differences between 15 : 2 and 30 : 2 in the concentration of fatigue element in a blood, subjective fatigue, vital signs and accuracy of CPR. Therefore, 30 : 2 CPR recommended by American Heart Association need to be recommended and performed in scene size up.

• Korean Journal of Soil Science and Fertilizer
• /
• v.1 no.1
• /
• pp.1-5
• /
• 1968

A low yielding paddy soil was water logged at $30{\pm}2^{\circ}C$ with soluble starch as a easily decomposable organic matter for 3 weeks in the laboratory. The relation of pH and Eh changes and soluble iron, manganese and silica was investigated. The experimental results obtained were summarized as follows; 1. When organic matter was applied, reduction of the soil was severer, that is, Eh value was lower by 200 mv. for a week in the beginning of submergence. 2. pH of the untreated soil was dropped a little just after submergence, and then gradually increased to 60. When treated, pH was increased due to abrupt drop of Eh in the beginning but decreased to 4.5 after a week, and became constant at this pH value. 3. Slight increase in soluble iron, manganese and silica was observed in the untreated soil whereas soluble iron, manganese and silica in the treated soil were increased about 20, 10, and 3 times, respectively. 4. When soluble starch was treated, pH and soluble silica or manganese was highly correlated[($H^+$) and Mn ${\gamma}=0.734^{**}$, ($H^+$) and $SiO_2$ ${\gamma}=0.923^{**}$] and below pH 5.0, release of these element was rapidly increased.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.50-56
• /
• 1998

A solvent sublation was studied for the determination of trace Cd, Co, Cu and Ni in water samples. Ammonium pyrrolidine dithiocarbamate (APDC) was used as a complexing agent. Experimental conditions such as pH of solution, amounts of APDC, the type and amount of surfactant, the type of solvent, etc. were optimized for the effective sublation of analytes. After metal-PDC complexes were formed in sample solutions of pH 2.5, the precipitate-type complexes were floated in a flotation cell with an aid of sodium lauryl sulfate as a surfactant and by bubbling with nitrogen gas. The precipitates were dissolved and separated into the surface layer of methyl iso-butyl ketone (MIBK). The analytes preconcentrated were determined by a graphite furnace atomic absorption spectrophotometry (GF-AAS). Extractability of each element was 88% for Cd(Ⅱ), 86% for Co(Ⅱ), 95% for Cu(Ⅱ) and 76% for Ni(Ⅱ), respectively. And this procedure was applied to the analysis of real samples. From the recoveries of more than 92%, it was concluded that this method could be simple and applicable for the determination of trace elements in various water samples of a large volume.