• Journal of Chest Surgery
• /
• v.31 no.11
• /
• pp.1089-1093
• /
• 1998

Background: In 1992, we first developed the technique for video-assisted thoracoscopic sympathectomy to treat palmar hyperhidrosis. It was soon proven to be a simple and effective therapy for essential hyperhidrosis. Clinically, patients suffereing from distressing hyperhidrosis in their heads and faces were observed. Materials and methods: From March 1997 to March 1998, the vidio-assisted thoracoscopic sympathectomy and sympathicotomy were performed in 60 patients suffering from craniofacial hyperhidrosis in the Department of Thoracic and Cardiovascular Surgery in the Respiratory Center of Yongdong Severance Hospital Seoul, Korea. Thirty-nine patients underwent a conventional sympathectomy(T1 sympathectomy group), and twenty-one patients underwent division of the sympathetic nerve trunk above the T2 sympathetic ganglion(T2 sympathicotomy). The median follow up was 9 months. Results: All of the treated patients obtained satisfactory alleviation of craniofacial hyperhidrosis. No recurrence was observed in group T1 sympathectomy whereas one occurred in sympathicotomy. The global rate of compensatory sweating was about the same in both groups ; 76.9% in T1 sympathectomy and 76.2% in T2 sympathicotomy. The rate of embarrassing and disabling compensatory sweating was 38.5% in T1 sympathectomy and 38.1% in T2 sympathicotomy with no significant in the statistic analysis(p> 0.05). No transient Horner's syndrome was observed in group T2 sympathicotomy whereas seven occurred in T1 sympathectomy with improvement in follow-up. Only an overnight hospital stay was required in both group. Conclusions: The video-assist thoracoscopic sympathicotomy is minimally invasive and effective. Video-assisted thoracoscopic T2 sympathicotomy has proven to be effective method and less complicated in treating patients with distressing craniofacial hyperhidrosis and consistent in obtaining the same results as T1 sympathectomy.

• Advanced Composite Materials
• /
• v.18 no.4
• /
• pp.365-379
• /
• 2009

Epoxy/S2-glass reinforced composites (SGRPs) infused with Cloisite 30B nanoclays were manufactured using the vacuum assisted resin infusion molding (VARIM) process. Prior to infusion, the matrix and clays were thoroughly mixed using a direct mixing technique (DMT) and a high shear mixing technique (HSMT) to ensure uniform dispersion of the nanoclays. Structures with varying clay contents (1-3 wt%) were manufactured. Both pristine and SGRP nanocomposites were then subjected to mechanical testing. For the specimens manufactured by DMT, the tensile, flexural, and compressive modulus increased with increasing the clay content. Similarly, the tensile, flexural, compressive, interlaminate shear and impact strength increased with the addition of 1 wt% clay: however the trend reversed with further increase in the clay content. Specimens manufactured by HSMT showed superior properties compared to those of nanocomposites containing 1 wt% clay produced by DMT. In order to understand these phenomena a morphological study was conducted. Transmission electron microscopy (TEM) micrographs revealed that HSMT led to better dispersion and changed the nanoclay structure from orderly intercalation to disorderly intercalation giving multi-directional strength.

• Mass Spectrometry Letters
• /
• v.8 no.1
• /
• pp.8-13
• /
• 2017

Analysis of quinidine for fish tissues using single drop microextraction (SDME) coupled with atmospheric pressure matrix assisted laser desorption/ionization mass spectrometry (AP-MALDI-MS) are reported. Optimization conditions; such as extraction solvent, extraction time, pH of the aqueous solution, salt additions (NaCl), stirring rate, matrix type and concentration are investigated. Linear dynamic range (${\mu}M$), limit of detection, relative recovery%, and enrichment factor are 0.08-9.2, 0.05, $94.8{\pm}3.1-98.5{\pm}3.3%$, $4.34{\pm}0.28-4.40{\pm}0.30$, respectively. SDME-AP-MALDI-MS shows good intraday and interday reproducibility.

• Journal of Environmental Science International
• /
• v.28 no.1
• /
• pp.99-106
• /
• 2019

Arsenic is among the heavy metals commonly found in aqueous environments. Iron oxide is known as an efficient adsorbent for the arsenic. A new synthetic method was applied to provide iron oxide giving a large specific surface area. The mixing method affects the formation of iron oxide. Ultrasonic waves assisted the formation of very fine iron oxide in an organic phase. The synthesized iron oxide is amorphous type with a high surface area of more than $181.3m^2/g$. Sorption capacity of the synthesized adsorbent was relatively very high for arsenic and varied depending on the oxidation state of arsenic: a higher capacity was obtained with As(V). Lower solution pH provided a higher sorption capacity for As(V). The competitive effect of co-exist anions such as chloride, nitrate, and sulfate was minimal in sorption capacity of the iron oxide for arsenic.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2002.12a
• /
• pp.20-47
• /
• 2002

Two-dimensional gel electrophoresis (2-DE) maps for human stomach tissue proteins have been prepared by displaying the protein components of the tissue by 2-DE and identifying them using mass spectrometry. This will enable us to present an overview of the proteins expressed In human stomach tissues and lays the basis for subsequent comparative proteome analysis studies with gastric diseases such as gastric cancer. In this study, 2-DE maps of soluble fraction proteins were prepared on two gel images with partially overlapping pH ranges of 4-7 and 6-9. On the gels covering pH 4-7 and pH 6-9, about 900 and 600 protein spots were detected on silver staining, respectively. For protein identification, proteins spots on micropreparative gels stained by colloidal Coomassie Brilliant Blue G-250 were excised, digested in-gel with trypsln, and analyzed by peptide mass fingerprinting with delayed extraction-matrix assisted laser dosorption/ionization-mass spectrometry (DE-MALDI-MS). In all, 243 protein spots (168 spots in acidic map and 75 spots in basic map) corresponding to 136 different proteins were identified. Besides these principal maps, maps of lower resolution, i.e. overview maps (displayed on pH 3-10 gels) for total homogenate and soluble fraction, are also presented with some identifications mapped on them. Based on the 2-DE maps presented in this study, a 2-DE database for human stomach tissue proteome has been constructed and available at http://proteome.gsnu.ac.kr/DB/2DPAGE/Stomach/. The 2-DE maps and the database resulting from this study will serve important resources for subsequent proteomic studies for analyzing the normal protein variability in healthy tissues and specific protein variations in diseased tissues.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1047-1055
• /
• 2006

We patterned nano-width lines on a super hard bulk diamond substrate by varying the ion beam current and ion beam sources with a dual beam field ion beam (FIB). In addition, we successfully fabricated two-dimensional nano patterns and three-dimensional nano plate modules. We prepared nano lines on a diamond and a silicon substrate at the beam condition of 30 kV, 10 pA $\sim$ 5 nA with $Ga^+$ ion and $H_2O$ assisted ion sources. We measured each of the line-width, line-depth, etched line profiles, etch rate, and aspect ratio, and then compared them. We confirmed that nano patterning was possible on both a bulk diamond and a silicon substrate. The etch rate of $H_2O$ source can be enhanced about two times than that of Ga source. The width of patterns on a diamond was smaller than that on a silicon substrate at the same ion beam power The sub-100 nm patterns on a diamond were made under the charge neutralization mode to prevent charge accumulation. We successfully made a two-dimensional, 240 nm-width text of the 300-lettered Lord's Prayer on a gem diamond with 30 kV-30 pA FIB. The patterned text image was readable with a scanning electron microscope. Moreover, three dimensional nano-thick plate module fabrication was made successfully with an FIB and a platinum deposition, and electron energy loss spectrum (EELS) analysis was easily performed with the prepared nano plate module.

• Clinical and Experimental Reproductive Medicine
• /
• v.38 no.2
• /
• pp.87-92
• /
• 2011

Objective: This study aimed to determine the safety and clinical effect of artificial shrinkage (AS) in terms of assisted hatching of fresh blastocysts. Also, we evaluated the correlation between patient age and the effect of AS on clinical outcome. Methods: Two AS methods, using a 29-gauge needle and laser pulse, were compared. Seventy-three blastocysts were shrunk using a 29-gauge needle and the same number of other blastocysts were shrunk by a laser pulse. We evaluated the shrunken blastocysts hourly and considered them viable if they re-expanded >70%. Blastocyst transfer cycles (n=134) were divided into two groups: a control group consisted of the cycles whose intact embryos were transferred (n=100), while the AS group consisted of the cycles whose embryos were replaced following AS (n=34). The implantation and pregnancy rates of the control group and AS group were compared ($p$ <0.05). Results: The re-expansion rates of the 29-gauge needle and laser pulse AS groups were similar (56 [76.7%] vs. 62 [84.9%], respectively). All of the remaining shrunken blastocysts were re-expanded within 2 hours. There was no degeneration of shrunken blastocysts. The total and clinical pregnancy rate of the AS group (23 [67.6%]; 20 [58.8%], respectively) was significantly higher than that of the control group (47 [47.0%]; 39 [39.0%], respectively). In the older patient group, there was no difference in the clinical outcomes between the AS and control groups. Conclusion: These results suggest that AS of blastocoele cavity, followed by the transfer, would be a useful approach to improve the clinical outcome in cycles in which fresh blastocyst stage embryos are transferred.

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.359-369
• /
• 2019

To evaluate the effect of simultaneous use of platelet glycoprotein IIb / IIIa receptor blocker and catheter assisted thrombus aspiration in the treatment of coronary stent thrombosis. 267 patients ($64.6{\pm}12.1years$, 187 men) with stent thrombosis on coronary angiography at Chonnam National University Hospital from July 2008 to July 2017 were enrolled. We devided two groups based on treatment modalities: Group I (N=32, platelet glycoprotein IIb / IIIa receptor blocker and thrombo-aspiration), Group II (N =235, either platelet glycoprotein IIb /IIIa receptor blocker or thrombo-aspiration, or none of both), and the major cardiac events including death, revascularization and stent thrombosis were followed up for 1 year. There were no significant differences in clinical characteristics between the two groups including age (Group I: $60.8{\pm}12.9$ vs. Group II: $65.1{\pm}11.9$, p= 0.603), male (Group I: 75.0% vs. Group II: 69.4%, p=0.681), and left ventricular ejection fraction (Group I: $58.1{\pm}9.0%$ vs. Group II: $59.5{\pm}11.9%$, p= 0.127). The major cardiac events did not differ between the two groups (Group I: 12.5% vs. Group II: 23.8%, p=0.180). The secondary endopoints were as followings: The mortality rate (Group I: 0% vs. 13.2%, Group II: p=0.034), target lesion revascularization (Group I: 9.4% vs Group II: 6.4%, p=0.461) and stent thrombosis (Group I: 3.1% vs. Group II: 4.7%, p=1.000). In conclusion, in the treatment of coronary artery stent thrombosis, simultaneous use of platelet glycoprotein IIb / IIIa receptor blocker and thrombus aspiration was associated with better clinical outcomes regarding 1 year mortality.

• Korean Journal of Plant Resources
• /
• v.29 no.6
• /
• pp.658-669
• /
• 2016

Rice blast, caused by a fungus Magnaporthe oryzae, is one of the most devastating diseases of rice worldwide. Analyzing the valuable genetic resources is important in making progress towards blast resistance. Molecular screening of major rice blast resistance (R) genes was determined in 2,509 accessions of rice germplasm from different geographic regions of Asia and Europe using PCR based markers which showed linkage to twelve major blast R genes, Pik-p, Pi39, Pit, Pik-m, Pi-d(t)2, Pii, Pib, Pik, Pita, Pita/Pita-2, Pi5, and Piz-t. Out of 2,509 accessions, only two accessions had maximum nine blast resistance genes followed by eighteen accessions each with eight R genes. The polygenic combination of three genes was possessed by maximum number of accessions (824), while among others 48 accessions possessed seven genes, 119 accessions had six genes, 267 accessions had five genes, 487 accessions had four genes, 646 accessions had two genes, and 98 accessions had single R gene. The Pik-p gene appeared to be omnipresent and was detected in all germplasm. Furthermore, principal component analysis (PCA) indicated that Pita, Pita/Pita-2, Pi-d(t)2, Pib and Pit were the major genes responsible for resistance in the germplasm. The present investigation revealed that a set of 68 elite germplasm accessions would have a competitive edge over the current resistance donors being utilized in the breeding programs. Overall, these results might be useful to identify and incorporate the resistance genes from germplasm into elite cultivars through marker assisted selection in rice breeding.

• The Korea Journal of Herbology
• /
• v.28 no.6
• /
• pp.47-51
• /
• 2013

Objectives : The Illicii Veri Fructus was not only traditional medicine but also food in Asia. The aim of this study was selection of optimum solvent in the fruit of Illicii Veri Fructus because an appropriate solvent affect a medicinal effect. Methods : Illicii Veri Fructus was carried out ultrasonic-assisted extraction as various solvents. Two main compounds, p-anisaldehyde and anethole, were successfully analyzed by high performance liquid chromatography-photodiode array detector (HPLC-PDA) and carried out method validation according to ICH guideline. The optimum solvent selected by comparing with yields of two main ingredients. Results : The p-anisaldehyde and anethole were detected at approximately 8.0 min and 19.8 min, respectively. It was all below 5.0% that RSD of retention time and peak area for two main peaks. Calibration curves of two compounds were good linearity as $R^2$ >0.9999. All of the precisions and accuracy were good intra-day and inter-day as below 5.0% RSD. Limited of detection (LOD) of p-anisaldehyde and anethole were analyzed as $0.134{\mu}g/mL$ and $4.286{\mu}g$, respectively. Limited of quantification (LOQ) of two compounds were $0.407{\mu}g$ and $12.989{\mu}g$, respectively. As a result of this study, p-anisladehyde was detected as 0.209 ~ 0.467%, however anethole was not detected in the distilled water. Conclusions : Anethole was main component as 5.329 ~ 6.815% except for water extraction. Methanol extraction among various solvents was detected the highest contents of p-anisaldehyde and anethole as 0.467(${\pm}0.008$)% and 6.815(${\pm}0.220$)%, respectively.