• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.384-387
• /
• 2003

In this paper, we have designed the integrated wire and wireless P2P framework using mobile agents to share efficiently resources as media file. Most of the P2P applications are used on the wire network. We propose the integrated wire and wireless P2P framework. Proposed P2P platform is based on JXTA of Sun Microsystems. But JXTA is pure peer-to-peer network model, so it sends message other peers as broadcast style to request resources. In this way, there are some problems as massage overload, bandwidth loss, etc. In order to solve this problem, we propose a hybrid peer-to-peer network model using mobile agent. Proposed scheme also solve existing hybrid pEp model's flaws which have the delay and low rate due to concentrated server. In proposed scheme, mobile agents that have autonomy and mobility are used to search the location of resources. Besides, mobile agents could solve the loss problem of the search result. To improve P2P QoS(Quality of Service), we could monitor peer's state information using PIP(Peer Information Protocol) of JXTA.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.4
• /
• pp.499-509
• /
• 1999

This study was carried out to investigate the effects of wearing disposable diaper with the endothermic agent on thermoregulatory response of infant. Five healthy female infants aged about 5 months were taken as a subject of this experiment. Experimental diapers were six kinds of disposable diaper constructed of nonwoven tissue, fluff pulp, super absorbent polymer, back sheet film, leg elastic, and 0g urea(A) 1g urea(B) , 2g urea(C), 3g urea (D), 4g urea(E) 5g, urea(F) respectively. Urea(98% or over purity) was used as an endothermic agent. Experiment was proceeded while infants were sleeping at 27.5$\pm$0.5$^{\circ}C$, 50$\pm$5% R.H, 0.04m/sec. Each disposable diaper's properties was tested. During the experiment rectal temperature skin temperature of 9 areas temperature inside the disposable diapers were measured, the results were as follows : 1) There was not significant difference among the diapers in absorption capacity retention capacity and rewet(p=0.05). The absorption under load was showed to A, B,

• YAKHAK HOEJI
• /
• v.38 no.5
• /
• pp.504-510
• /
• 1994

A facile synthesis of 2-aryl-5-benzoxazolepropionic acid derivatives(1 0a-d), which are potent antiinflammatory agent, is reported. Methyl ${\alpha}$-(p-hydroxyphenyl)propionate(5) was prepared from Friedel-Crafts reaction of isopropoxy benzene with methyl ${\alpha}$-chloro-${\alpha}$-(methylthio) acetate(1), followed by desulfurization, methylation and clevage of ether bond. Compounds(10a-d) were made from(5) by a sequence of nitration, reduction, formation of benzoxazole ring, and hydrolysis in good yields, respectively.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.2
• /
• pp.351-360
• /
• 2013

Objectives : The purpose of this study was to evaluate the effects of tooth bleaching agent contained 15% carbamide peroxide on the color, microhardness and surface roughness of tooth-colored restorative materials by using pH cycling model. Methods : Four types of tooth-colored restorative materials, including a composite resin(Filtek Z350 ; Z350), a flowable composite resin(Filtek P60 : P60), a compomer(Dyract$^{(R)}$ AP ; DY), and a glass-ionomer cement(KetacTM Molar Easymix ; KM). were used in the study. Eighty-eight specimens of each material were fabricated, randomly divided into two groups(n=44): experimental group(15% carbamide peroxide) and control group(distilled water). These groups were then divided into four subgroups(n=11). All groups were bleached 4 hours per day for 14 days using pH cycling model. The authors measured the color, microhardness, and roughness of the specimens before and after bleaching. The data were analyzed with ANOVA and T-test. Results : Z350 and P60 showed a slight color change(${\Delta}E^*$), whereas DY and KM showed significantly color change(p<0.05). Among them, the greatest color change was observed in DY. Percentage microhardness loss(PML) of the distilled water group was 1.8 to 5.1%, and 15% peroxide peroxide group was 5.0 to 25.2%. Microhardness of DY and KM showed a statistically significant decrease(p<0.05). Roughness was increased in all groups after bleaching. Z350 and P60 does not have a significant difference(p>0.05), however DY and KM significantly increased more than the 0.2 ${\mu}m$(p<0.05). Conclusions : The effects of bleaching on restorative materials were material dependent. It is necessary to consider the type of the material before starting the treatment.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.2
• /
• pp.26-32
• /
• 2009

In this study, the degradation of BTEX (benzene, toluene, ethylbenzene, xylene) was tested in both (Fe$^{3+}$+chelating agent)/H$_2$O$_2$system [Fe(III) 1 mM, oxalate 6 mM, H$_2$O$_2$ 3%, and pH 6] and UV/(Fe3++ chelating agent)lHzOz system [UV dose 17.4 kWhlL, Fe(III) 1mM, oxalate 6 mM,H$_2$O$_2$ 1%, and pH 6]. The types of chelating agents used in experiments were catechol, NTA, gallic, acetyl acetone, succinic, acetate, EDTA, citrate, malonate, and oxalate and the optimum chelating agent for BTEX degradation was determined. The results showed that acetate was the optimum chelating agent for BTEX degradation in both (Fe$^{3+}$+chelating agent)/H$_2$O$_2$ and UV/(Fe$^{3+}$+chelating agent)/H$_2$O$_2$ system, and UV radiation enhanced the degradation of BTEX with any types of chelating agents. Moreover, UV/(Fe$^{3+}$+chelating agent)/H$_2$O$_2$ system, which chelating agent was acetate, removed effectively mixtures of BTEX and MTBE (methyl tert-butyl ether) when the concentration of both BTEX and MTBE was 200 mg/L, respectively. In this system, BTEX was degraded completely and 85% of MTBE was degraded at the reaction time of 180 min. Therefore, UV/((Fe$^{3+}$+chelating agent)/H$_2$O$_2$ system with acetate as a chelating agent removed not only BTEX but also BTEX and MTBE, effectively.

• Biomolecules & Therapeutics
• /
• v.8 no.4
• /
• pp.332-337
• /
• 2000

Physicochemical properties of aspalatone (acetylsalicylic acid maltol ester, AM), which has been recently found to have an antithrombotic effect, were studied in terms of solubility, dissolution, partition coefficient (Pc) and stability. The solubility of AM at 37$^{\circ}C$ was about 1.2 mg/ml and the P$_{c}$ value for n-octanol/water and chloroform/water was 11.4 and 382.6, respectively. Dissolution rates of AM at pH 1.2 and 6.8 were more than 80% within 30 min. The degradation of AM followed apparent first-order kinetics, and was dependent on temperature, pH and ionic strength. From the pH-rate profile, the optimal pH was found to be at around 4.0. Half-lives at pH 1.2 and 6.8 were 33.5 and 44.4 hr, respectively. The degradation rate of AM at pH 1.2 was somewhat faster than that of aspirin, but at pH 7.0, the degradation rate of AM was slower than that of aspirin.n.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.664-666
• /
• 2005

이 논문에서는 기존의 지식관리시스템과 P2P방식을 접목한 P2P 지식관리시스템을 제안하고 제안된 시스템의 구조와 효율적으로 지식을 검색하기 위한 지능형 에이전트 대하여 기술하였다. 에이전트의 종류는 지식추출과 추천 에이전트가 있으며, 지식추출 에이전트는 대량의 데이터에서 지식을 추출하고, 개인 맞춤형 지식 추천 에이전트는 추출된 지식에서 사용자가 관심 있는 분야의 지식을 추천해 주는 것이다. 제안된 시스템의 구조와 에이전트 기법은 회사나 단체에 속한 사용자들이 방대한 데이터, 정보 또는 사용자들의 전문성과 경험으로 축적된 지식을 빠르고 쉽게 검색하게 해주어 양질의 지식을 사용자들이 추천 받아 사용하도록 함으로써 전체 구성원의 지식도를 높이며, 이러한 지식들을 재활용하여 더욱 많은 지식과 부가 가치를 창출하도록 지원하여 준다.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.393-401
• /
• 2007

P2P systems have gained a lot of research interests and popularity over the years and have the capability to unleash and distribute awesome amounts of computing power, storage and bandwidths currently languishing - often underutilized - within corporate enterprises and every Internet connected home in the world. Since there is no central control over resources or devices and no before hand information about the resources or devices, device discovery remains a substantial problem in P2P environment. In this paper, we cover some of the current solutions to this problem and then propose our feed forward neural network (FFNN) based solution for device discovery in mobile P2P environment. We implements feed forward neural network (FFNN) trained with back propagation (BP) algorithm for device discovery and show, how large computation task can be distributed among such devices using agent technology. It also shows the possibility to use our architecture in home networking where devices have less storage capacity.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.04a
• /
• pp.374-377
• /
• 2005

유비쿼터스 컴퓨팅 환경에서는 사용자 주변의 센서로부터 각종 컨텍스트 정보를 입력받아 사용자를 식별하고 필요한 자원을 분배하는 과정이 중요하다. 하지만 사용자 식별 및 자원 분배 과정에서 특정 사용자에 의해 자원의 독점 현상이 발생되기 때문에 다른 사용자들에게 효과적으로 자원을 분배할 수 없다. 이를 위해 센서와 자원의 공유에 대한 연구가 필요하다. 본 연구에서는 휴대용 모바일 장치에서 사용자의 컨텍스트 인식과 자원의 공유를 위하여 P2P 방식을 적용한 지능형 P2P 모바일 에이전트를 제안한다. 제안하는 구조는 사용자 주변의 센서와 서비스 자원을 공유함으로써 특정 자원에 대한 독점성을 제거하고, 효과적인 사용자 컨텍스트 인식 및 서비스 지원을 목적으로 한다.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.5
• /
• pp.374-380
• /
• 2018

PURPOSE. The effect of silica-based glass-ceramic liners on the tensile bond strength between zirconia and resin-based luting agent was evaluated and compared with the effect of 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing primers. MATERIALS AND METHODS. Titanium abutments and zirconia crowns (n = 60) were fabricated, and the adhesive surfaces of the specimens were treated by airborne-particle abrasion. The specimens were divided into 5 groups based on surface treatment: a control group, 2 primer groups (MP: Monobond Plus; ZP: Z Prime Plus), and 2 liner groups (PL: P-containing Liner; PFL: P-free Liner). All specimens were cemented with self-adhesive resin-based luting agent. After 24-hour water storage and thermocycling (5,000 cycles, $5^{\circ}C/55^{\circ}C$), the tensile bond strength was measured using a universal testing machine. Failure mode analysis and elemental analysis on the bonding interface were performed. The data were analyzed using Kruskal-Wallis test, Dunn's post hoc test, and Fisher's exact test. RESULTS. The liner groups and primer groups showed significantly higher tensile bond strengths than that of the control group (P<.05). PFL showed a significantly higher tensile bond strength than the primer groups (P<.05). The percentage of mixed failure was higher in the primer groups than in the control group (P<.001), and all the specimens showed mixed failure in the liner groups (P<.001). A chemical reaction area was observed at the bonding interface between zirconia and liner. CONCLUSION. The application of liner significantly increased the tensile bond strength between zirconia and resin-based luting agent. PFL was more effective than MDP-containing primers in improving the tensile bond strength with the resin-based luting agent.