• Conservation Science in Museum
• /
• v.16
• /
• pp.96-113
• /
• 2015

High-barrier films are used to store cultural heritage objects in a safe environment sealed from oxygen and moisture. One of the high-barrier films use populary E manufactured by Japanese company M from the 1990's. However, this product has stayed in wide use, due to dearth of research on related subjects - including studies comparing it with other similar products-, in spite of the fact that high price information about its characteristics and environmental conditions is largely lacking. This study examines the characteristics of a number of high-barrier films with the goal to establish environmental standards for safer conservation of cultural heritage objects. E by the Japanese manufacturer M is compared with four other films; an electronics packaging films by a Korean firm, a film specially produced for the purposes of experiment in this study and a zipper bag-type film. Experiments were performed to compare the properties and gas blocking ability of the films by looking at their cross-section and measuring the thickness, tensile strength, elongation, absorbance of UV and visible light, yellowing and the permeability for oxygen and vapor. Based on these experiments, there are observed changes under different environmental conditions and depending on the length of use through temparature and humidification reproucing test. The results showed that while the high-barrier film by the Korean manufacturer was suitable for use as a packaging material for cultural heritage objects, the zipper bag-type film (P) was ill-adapted for this purpose. Based on the experiments reproducing the real-world environment, the length of useful life was also determined for each.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.E1
• /
• pp.17-24
• /
• 2001

For the purpose of collecting fog droplets as a function of size a new sampling method was developed in this study. Formation of 100$\pm$10㎛ thickness of polymeric water absorbent film (PWAF) on a nuclepore filter could be successfully realized. Also applicability of particle induced X-ray emission (PIXE) method to the chemical analysis of size-segregated fog droplets collected on PWAF was examined experimentally with synthetic fog droplets generated from a nebulizer. Absorption capacity of S-PAAS polymeric water absorbent shows marked decreases in the range less than 1 wt% and slight decrease between 1 and 3.5 wt% of every salt concentration. Dependency of absorption capacity on pH shows the maximum at pH 7. No apparent peak which can influence the quantitative analysis of elements dissolved and suspended in fog droplets was found at PIXE spectrum of PWAF blank. PWAF kept the original shape without rupture under the PIXE analytical conditions of beam intensity for 10 to 60 nA and irradiation time of 4∼5 min. It should be said that the proposed new technique in the work is helpful to get more detailed information of fog droplets, to clarify the fog formation processes, and to develop a model of acid deposition process.

• Journal of Surface Science and Engineering
• /
• v.15 no.1
• /
• pp.11-18
• /
• 1982

80% Ni-Permalloy is soft magnetic material with high initial permeability and low magnetic coercive force Hc, and is used to computer memory cores and minirelays of communication e-ngineering. In this paper 80 Permalloy thin film on copper cathode was alloy-deposited from Watts so-lution contatining FeSO4$.$7H2O. The amount of FeSO4$.$7H2O in the solution, pH, temperature of the solution and plating current density were varied as parameters and the resulting comp-osition changes of deposited film were analyzed electrochemically with respect to the parame-ters. From the above procedure electroplating conditions for deposition of 80 Permalloy were est-ablished as following: 17-21 g/$\ell$ of FeSO4$.$7H2O in Watts solution, current density 1.0-2.0 Amp/dm2, pH 2.5-3.0 and temperature range of 50-60$^{\circ}C$.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.78-85
• /
• 1995

We fabricated the Pb$_{1-0.28{\alpha}}La_{0.28}TiO_{3}$ (PLT(28)) thin film successfully by using the sol-gel method and characterized it to evaluate its potential for being utilized as the capacitor dielectrics of ULSI DRAMs. In our sol-gel process, the acetates were used as the starting materials. Through the TGA-DTA analysis, we established the excellent fabrication conditions of the sol-gel method for the PLT(28) thin film. We obtained the dense and crack-free PLT(28) thin film of 100% perovskite phase by drying at 350$^{\circ}C$ after each coating and final annealing at 650$^{\circ}C$. Its electrical properties were measured from the planar capacitors fabricated on the Pt/Ti/SiO$_{2}$/Si substrate. By the P-E hysteresis measurement, its paraelectric phase was identified and its dielectric constant and leakage current density were measured as 936 and 1.1${\mu}A/cm^{2}$, respectively. Those electrical values indicate that the PLT(28) thin film is the most successful candidate for the capacitor dielectrics of ULSI DRAMs at the present.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.3
• /
• pp.188-193
• /
• 2011

For a long time work or study, pendent task lighting system prepared with phosphor luminescent film LED was developed for eye protection and working efficiency improvement. Developed lighting system was used together with pendent and ambient lighting. Such as, we made comfortable lighting environment system. Evaluation for developed lighting system, that had proceeded to Mock-up test and subjective evaluation. Also It had proceeded that lighting environment analyzed and compatibility valuation of installation. In subjective evaluation, the students have expressed themselves satisfied to phosphor luminescent film LED lighting system. In Mock-up test, It is not problem to intensity of illumination, luminance and color temperature. Therefore, developed LED lighting system was installed at the Daegu apartment. It is having a P.O.E study progress to phosphor luminescent film LED lighting system.

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.668-673
• /
• 1996

In this paper, (P $b_{1-x}$ L $a_{x}$)(Z $r_{0.52}$ $Ti_{0.48}$) $O_{3}$ (X=0-13[at%]) thin film were prepared by the Sol-Gel method, Multiple PLZT thin films were spin-coated on the Pt/Ti/ $SiO_{2}$Si substrate. The electrical properties of the films were investigated for varying the annealing temperature. In the PLZT(11/52/48) specimens, the dielectric ocnstant of 1236 and the polarization reversal time of 460[nm] were obtained and the breakdown of the film did not occur up to 1*10$^{10}$ cycles at the voltage of 7[V] by the bipolar acceleration. The remanent polarization and coercive field decreased with increasing the content of La in the range of 0-13[at%] and thin film of the PLZT(11/52/48) showed the value of 2.56[.mu.C/c $m^{2}$] and 21.1[kV/cm], respectively.ly.y.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.81-86
• /
• 2013

This experiment was carried out to select white asparagus varieties suitable for shading culture in greenhouse. Eight white and one green varieties were tested. Seeds were sown in 72-cell trays in a glasshouse on 24 Dec. 2008 and the seedlings were transplanted in a P.E house on 22 May 2009. Planting distances were 30 cm apart in a raw and 125 cm between the raws. For white asparagus production, small tunnel ($210cm{\times}160cm$) was established inside the P.E house, and covered with black and white P.E film (0.1 mm) on 5 March 2010. Days to sprouting took 5 days in 'Ravel' variety and took 16 to 18 days in 'Backlim', 'Horlim', 'Herkolim' varieties. The number of spear was highest in 'Ravel' with 6 and lowest in 'Backlim' with 3.7. The spear weight was heaviest in 'Herkolim' with 25.6 g and lightest in 'Ravel' with 15.6 g. The highest total yield was in 'Herkolim' with 296 kg/10a, followed by 'Super welcome' with 275 kg/10a and lowest in 'Rapsody' with 176 kg/10a. Marketable yields in 'Super welcome' and 'Herkolim' were 241 kg/10a and 239 kg/10a, respectively, and the yield was lowest in 'Rapsody' with 139 kg/10a. The L grade (over 20 g of spear weight) was highest in 'Herkolim'. Accordingly, 'Herkolim' was the most suitable white asparagus variety among the tested varieties for shading cultivation in greenhouse.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.2 no.2
• /
• pp.245-252
• /
• 1978

In order to obtain some information for solvent dyeing, polyethylene terephthalate (PET) was treated with water, tetrachloroethylene yarn (TCE), and water/TCE emulsion for three hours at the temperatures from $40^{\circ}$ to $140^{\circ}C$. The change of fine structure of substratum by measuring the shrinkage, the degree of crystallinity, the stress relacxation modulus and Young's modulus. The P.E.T. film was also treated in water (at $140^{\circ}C$) for 4 hours to stabilize the substratum. By means of film roll cyliderical method, the Disperse Blue 27 was diffused. Then, calculated the diffusion coefficient and examined the application of WLF equation. However, the temperature dependence of the shrinkage could be explain with WLF equation, the diffusion coefficient couldn't be applied the WLF equation when the substratum was stabilized. From the result, the effects on shrinkage were in the order of water

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.2
• /
• pp.117-123
• /
• 2009

$Pb_{x}Cd_{1-x}S$ films are prepared in the composition range of 0.05${\leq}x{\leq}$0.25, using a chemical bath deposition growth technique under optimum conditions amide at realizing good photo response. The x-ray diffraction results show that the films are of PbS-CdS composite with individual CdS and PbS planes. The films exhibit two direct band gaps, 2.4 eV attributed to CdS, while the other varies continuously from 2.4 eV to 1.3 eV. The films surface morphology is smooth with crystallite, whose grain size increases with increasing mole fraction (x). The decrease in band gap with increase in lead concentration suggests inter-metallic compound of PbS (Eg=0.41 eV) with CdS (Eg=2.4 eV)

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.351-355
• /
• 2001

This study was carried out to examine the of quality on the dried Omija according to its package materials and storage plates. The changes of moisture contents, anthocyanin content, molds damage rates, and color values were measured during storage. In the sealing up by the P.E file, the moisture contents of the dried Omija had just a little differences among the storage places, but in the gauze bag remarkably as the storage period goes on, especially in this case, 8 months later since the storage in the cool chamber, the damage rates of the dried Omija by the mold was 9.0%, twice as much as in the indoor bag packaging it was increasand after 10 months, that was lather high in the indoor and warehouse. The anthocyanin content of the dried Omija after the storage of 10 months was the highest at 0.05mm black P.E film package in the cool chamber, which was 55.7 mg/100g, but in the indoor and warehouse 39.7, 45.0mg/100g, respectively. These results show thats the storage conditions had an important effect on the quality of the dried Omija during the long-term storage.