• East Asian mathematical journal
• /
• v.7 no.1
• /
• pp.15-18
• /
• 1991

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.56-62
• /
• 2006

This paper describes the MMIC product qualification of the Ka band satellite transponder for the COMS(Communication, Ocean and Meteorological Satellite). Ka-band active equipment for the COMS communications transponder are being developed by using 12 kinds of MMICs which include low noise amplifiers, medium power amplifiers, frequency mixers, frequency multipliers, RF switch, and HEMT attenuator MMIC, Those MMICs had been fabricated at the MMIC production foundry of northrop Grumman Space Technology (Velocium) which is qualified for space application, and experienced in various space programs during past decades. For the MMIC product qualification, Visual inspection and SEM inspection had been performed, and burn-in test for 240 hours and accelerated life-test for 1000 hours had been done on test fixtures of individual MMIC products at $125^{\circ}C$. Additionally, infrared temperature scanning and finite element simulation were performed to analyze and confirm the channel temperature of semiconductor devices on several representatives of those MMIC products that os one of the most important factors in performance degradation and life reduction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.3
• /
• pp.141-170
• /
• 1991

This study was to analyze the displacement and the magnitude and mode of distribution of the stresses in the lower overdenture, the mucous membrane, the abutment teeth and the mandibular supporting bone when various abutment designs were subjected to different loading schemes. For this study, the two-dimensional finite element method was used. The models of overdenture and mandibe with the canine and the second premolar remaining, were fabricated. In the first design, a 1 mm space was prepared between the denture and the dome abutment with the height of 2 mm(OS). In the second design, a contact between the denture and the occlusal third of the dome abutment with the hight of 2 mm was prepared(OC). In the third design, a 0.5 mm space was prepared between the denture and 8 degree tapered cylindrical abutments with the height of 7 mm(TS). In the fourth design, a contact between the denture and the occlusal two thirds of the conical abutments with the height of 7 mm was prepared(TC). In order to represent the same physiological condition as the fixed areas of the mandible under loading schemes, the eight nodes which lie at the mandibular angle, the coronoid process and the mandibular condyle were assumed to be fixed. Each model was loaded with a magnitude of 10 Kgs on the first molar region (P1) and 7 Kgs on the central incisor region (P2) in a vertical direction. The force of 10 Kgs was then applied distributively from the first premolar to the second molar of each motel in a vertical direction (P3). The results were as follows: 1. The vertical load on the central incisor region(P2) produced the higher displacement and stress concentration than that on the posterior region(P1, P3). 2. The case of space between abutment and denture base produced higher displacement than that of contact, and the case of long abutment produced higher displacement than that of short abutment because of low rigidity of denture base. 3. The magnitude of the torque and vertical force to the abutment teeth and the stress distribution to the denture base was higher in the telescope coping than in the overdenture coping. 4. The vertical load on the central incisor region(P2) produced higher equivalent stress in the mandible than that on the posterior region(P1, P3). 5. The case of space between abutment and denture base produced better stress distribution to the farther abutment from the loading point than that of contact. 6. In case of sound abutment teeth, the type of telescope coping can be used, hilt in case of weak abutment, the type of overdenture coping is considered to be favorable generally.

• Journal of Animal Environmental Science
• /
• v.1 no.2
• /
• pp.137-144
• /
• 1995

This experiment was conducted to determine the effects of non-climatic environmental factors on growth performances and behavioural patterns of weanling pigs. Three hundred and sixty weanling pigs were contained and carried out with three levels of spaces per pig(0.18, 0.23 and 0.30$m^2$) and three different numbers of pigs per pen(15, 20 and 25 pigs) up to 30kg body weight. Designed by using a 3 $\times$ 3 factorial arrangement(three levels of spaces $\times$ three different numbers of pigs). This experiment investigated the effects of main factors and the relationship between each factors. The result of this experiment were summarized as follows ; 1. The reduction of floor space caused the reduction of feed/gain in the weanling pigs. Pigs responded with the increased feed intake(p<0.01) and with no change in body weight gain. 2. There were no significant differences in the body weight gain and feed/gain in weanling pigs by changing group sizes, but group size affected the feed intake significantly(p<0.01). 3. Space allowance affected the behavioural patterns significantly(p<0.01) of weanling pigs. The reduction of floor space caused the increment of aggressive behaviour and weanling pigs responded with the decreased resting, non aggressive social and play behaviour. 4. There were no significant differences in the resting, eating, aggressive and non aggressive social behaviour in weanling pigs by changing group sizes, but the large group size caused the reduction of play behaviour in the weanling pigs(p<0.01). 5. Therefore we concluded that weanling pigs require 0.23$m^2$ per pig and 20~25 pigs per pen for the better environment condition.

• Journal of The Korean Astronomical Society
• /
• v.49 no.3
• /
• pp.73-81
• /
• 2016

We report the characterization of a massive (m_p = 3.9±1.4M_jup) microlensing planet (OGLE-2015-BLG-0954Lb) orbiting an M dwarf host (M = 0.33 ± 0.12M_⊙) at a distance toward the Galactic bulge of $0.6^{+0.4}_{-0.2}kpc$, which is extremely nearby by microlensing standards. The planet-host projected separation is a⊥ ~ 1.2AU. The characterization was made possible by the wide-field (4 deg²) high cadence (Γ = 6 hr^–1) monitoring of the Korea Microlensing Telescope Network (KMTNet), which had two of its three telescopes in commissioning operations at the time of the planetary anomaly. The source crossing time t_* = 16 min is among the shortest ever published. The high-cadence, wide-field observations that are the hallmark of KMTNet are the only way to routinely capture such short crossings. High-cadence resolution of short caustic crossings will preferentially lead to mass and distance measurements for the lens. This is because the short crossing time typically implies a nearby lens, which enables the measurement of additional effects (bright lens and/or microlens parallax). When combined with the measured crossing time, these effects can yield planet/host masses and distance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.3
• /
• pp.83-94
• /
• 2023

This study analyzed the satisfaction of green infrastructure around 39 dams, including multi-purpose dams, water dams, and flood control reservoir dams, to induce space improvement in terms of sustainability, and the results of the study are as follows. First, the satisfaction level based on the Likert scale of 5 points for the currently created dam green infrastructure was 3.76, and there were differences depending on the respondents' gender, age, residence, number of dam visits, and the need to pursue sustainability, and it was analyzed to be statistically significant. In the case of gender, p<.05, age, residence, number of dam visits, and the need to pursue sustainability were found to be p<.01. Regression analysis was conducted to confirm the effect of these respondents' characteristics on satisfaction, and it was analyzed that only the number of dam visits and the need to pursue sustainability had a statistically significant effect, and other characteristic variables had no significant effect. Second, in terms of satisfaction with the conceptual image of public bridge, view place and play space, which are the main spaces of dam green infrastructure considering sustainability, view place was the highest at 4.43, the play space was 4.35 and public bridge was analyzed as 4.21. The t-test result for the satisfaction of each space was found to be p<.01, and the difference in values was analyzed to be significant. The difference from the current satisfaction with green infrastructure was also analyzed as p<.00, showing a statistically significant difference. Third, as a way to revitalize green infrastructure around the dam through the results of satisfaction analysis, it is necessary to identify needs for major visitors in their 40s and 50s and create a space considering them. It was proposed to derive facilities and programs that can be introduced to other regions through the analysis of green infrastructure status around dams in Chungbuk, Jeonju, and Ulsan, where there are relatively many dams. Furthermore, satisfaction analysis by space showed that green infrastructure around the dam could be activated in terms of sustainability when selecting packaging materials considering the structure and shape of the dam, arranging observation facilities considering lake prospects, and introducing amusement facilities using local environmental resources. This study differs from previous studies in that it presented space improvement measures in consideration of sustainability for green infrastructure around dams for non-urban areas, and space improvement can contribute to improving it connectivity in urban and non-urban areas, which can also contribute to improving the sustainability of green infrastructure in Korea.

• Bulletin of the Korean Mathematical Society
• /
• v.38 no.4
• /
• pp.773-786
• /
• 2001

On the setting of the half-space of the Euclidean n-space, we consider harmonic Bergman spaces and we also study properties of the reproducing kernel. Using covering lemma, we find some equivalent quantities. We prove that if lim$ lim\limits_{i\rightarrow\infty}\frac{\mu(K_r(zi))}{V(K_r(Z_i))}$ then the inclusion function $I : b^p\rightarrow L^p(H_n, d\mu)$ is a compact operator. Moreover, we show that if f is a nonnegative continuous function in $L^\infty and lim\limits_{Z\rightarrow\infty}f(z) = 0, then T_f$ is compact if and only if f $\in$ $C_{o}$ (H$_{n}$ ).

• Journal of the Chungcheong Mathematical Society
• /
• v.4 no.1
• /
• pp.103-113
• /
• 1991

Some properties of a path space and the fundamental group ${\sigma}(X,x_0,G)$ of a topological transformation group (X, G, ${\pi}$) are described. It is shown that ${\sigma}(X,x_0,H)$ is a normal subgroup of ${\sigma}(X,x_0,G)$ if H is a normal subgroup of G ; Let (X, G, ${\pi}$) be a transformation group with the open action property. If every identification map $p:{\Sigma}(X,x,G)\;{\longrightarrow}\;{\sigma}(X,x,G)$ is open for each $x{\in}X$, then ${\lambda}$ induces a homeomorphism between the fundamental groups ${\sigma}(X,x_0,G)$ and ${\sigma}(X,y_0,G)$ where ${\lambda}$ is a path from $x_0$ to $y_0$ in X ; The space ${\sigma}(X,x_0,G)$ is an H-space if the identification map $p:{\Sigma}(X,x_0,G)\;{\longrightarrow}\;{\sigma}(X,x_0,G)$ is open in a topological transformation group (X, G, ${\pi}$).

• Communications of the Korean Mathematical Society
• /
• v.35 no.1
• /
• pp.217-227
• /
• 2020

Let ψ be an analytic function on 𝔻, the unit disc in the complex plane, and φ be an analytic self-map of 𝔻. Let 𝓑 be a Banach space of functions analytic on 𝔻. The weighted composition operator W_φ,ψ on 𝓑 is defined as W_φ,ψf = ψf ◦ φ, and the composition operator C_φ defined by C_φf = f ◦ φ for f ∈ 𝓑. Consider α > -1 and 1 ≤ p < ∞. In this paper, we prove that if φ ∈ H^∞(𝔻), then C_φ has closed range on any weighted Dirichlet space 𝒟_α if and only if φ(𝔻) satisfies the reverse Carleson condition. Also, we investigate the closed rangeness of weighted composition operators on the weighted Bergman space A^p_α.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.753-757
• /
• 1994

In control system design, whether the various subsystems are in discrete time or continuous time, the state space is usually regarded as a continuum. However, when the system is implemented, some subsystems may have a state space which is a subset of finite computer arithmetic. This is an important concern if a subsystem has chaotic behaviour, because it is theoretically possible for rich and varied motions in a continuum to collapse to trivial and degenerate behaviour in a finite and discrete state space [5]. This paper discusses new ways to describe these effects and reports on computer experiments which document and illustrate such collapsing behaviour.