• Journal of the Korean Chemical Society
• /
• v.41 no.9
• /
• pp.471-482
• /
• 1997

GC/MS was used to find an optimum experimental condition for the screening of organic acids in urine. Urinary organic acids were isolated through the liquid-liquid extraction method (LLE) to examine the influence of pH and the effect of including the back extraction and oximation processes respectively on the extraction. When pH was adjusted to 0.5 during the extraction without oximation process, relatively higher recovery rate and the smallest relative standard deviations (0.3-12.4%) were obtained. By removing the interference, the addition of back extraction made possible surer identification of organic acids with retention time of 15-16 minutes. Under this condition, we obtained the content distribution of urinary organic acids in healthy Korean children (n=16) by establishing the calibration curves for 51 standard organic acids.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.351-353
• /
• 2017

To realize large-format compact array detectors covering a wide far-infrared wavelength range up to 200 µm, we have been developing Blocked-Impurity-Band (BIB) type Ge detectors with the room-temperature surface-activated wafer bonding technology provided by Mitsubishi Heavy Industries. We fabricated various types of $p^+-i$ junction devices which possessed a BIB-type structure, and evaluated their spectral response curves using a Fourier transform spectrometer. From the Hall effect measurement, we also obtained the physical characteristics of the $p^+$ layers which constituted the $p^+-i$ junction devices. The overall result of our measurement shows that the $p^+-i$ junction devices have a promising applicability as a new far-infrared detector to cover a wavelength range of $100-200{\mu}m$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.35-40
• /
• 2015

In this study, an n-ZnO/p-Si heterojunction diode with embedded Ag nanoparticles was fabricated to investigate the possible improvement of light trapping via the surface plasmon resonance effect for solar cell applications. The Ag nanoparticles were fabricated by the physical sputtering method. The acquired current-voltage curves and optical absorption spectra demonstrated that the application of Ag nanoparticles in the n-ZnO/p-Si interface increased the photo current, particularly in specific wavelength regions. The results indicate that the enhancement of the photo current was caused by the surface plasmon resonance effect generated by the Ag nanoparticles. In addition, minority carrier lifetime measurements showed that the recombination losses caused by the Ag nanoparticles were negligible. These results suggest that the embedding of Ag nanoparticles is a powerful method to improve the performance of n-ZnO/p-Si heterojunction solar cells.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.10
• /
• pp.1365-1371
• /
• 2011

The intensity and duration of sexual behavior in Bos indicus was assessed through the continuous observation of sexual receptivity. Two groups of cows were formed: only synchronized (n = 50) and other group further superovulated (n = 20). An intravaginal implant that released progesterone over 9 d was used. After removing the implant, 25 mg of $PGF_{2{\alpha}}$ was administered. In the superovulated group, the administration of 280 mg (Follicle stimulant hormone) FSH-P1 per cow with a decreasing dosage over 4 d was utilized. In both groups, behavioral observations began at the moment of implant removal. Sexual behavior was analyzed using a Kruskal-Wallis test to compare the mean of hours in estrus, effective mountings and number of mounts/hour during estrus. A nonparametric survival analysis was performed using the time in two ways: i) when an event happened it was placed in a 24 h timeframe and, ii) the time of observation in continuous form (96 h) assessing the difference between curves by the log rank test Chi-square. The only significant difference was the number of mounts/h during receptivity (p<0.05). In the superovulated group three periods of sexual activity during the day were identified, with these events being of greater frequency and duration than the synchronized group (p = 0.02); besides, the superovulated group began estrus before the synchronized group (p = 0.0035) when using the total period. In a simulation study, when the number of observations went from two (06:00-18:00) to three periods (06:00, 12:00 and 18:00) cows detected accurately (<6 h after the onset) increased more than 20%. The results show that superovulated cows presented greater intensity and duration of sexual activity in contrast with only synchronized animals.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.4 no.1
• /
• pp.49-54
• /
• 1967

The authors considered the effects of trim in the small coastal passenger boat upon resistance in this paper. Any change of trim no matter how small, necessarily produces some effect upon resistance. The relations between the resistance coefficients and trim were investigated through the towing test of the Model $MCI-P_1-65$, Korean Standardized Ship, GT 70 tons passenger boat in the gravitational tank. The Lines of the Model are given in Fig. 1. Principal dimensions and other characteristics vary with the trim in general. Those values varied with the trim for $MCI-P_1-65$ are tabulated in table 1. The resistance was measured at five conditions such as even keel, 0.0273L, (original designed trim) 0.0473L, 0.0663L, 0.0873L trim by the stern, fixing the displacement corresponding to the designed load water line. Model was made of wood in length of 3.5 feet coated with varnish, and without appendages. As the artificial turbulent stimulator, the sand strip method was used. The results of model towing tests, correcting to water temperature of $70^{\circ}F$, were expanded to full scale using the Schoenherr's friction formula and surface roughness allowance coefficient of 0.0004. The authors point out, the following results. 1) Optimum trim which gives the minimum resistance exists for every speed at constant displacement and each comes to the same value. For $MCI-P_1-65$ optimum trim is 0.0673L trim by the stern(Fig.4-The cross curves of the resistancecoefficients). 2) At constant displacement, when LCB(longitudinal position of center of buoyancy) varies with the trim, there exists optimum value of LCB which gives minimum resistance for every speed and each comes to the same value. For $MCI-P_1-65$ optimum position of LCB is 8%L aft from midship section (Fig.6).

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.43-53
• /
• 1997

The purpose of this study was to aid in the prediction of tumor cell tolerance to radiotherapy and/or chemotherapy. For this study, cell surviving curves were obtained for mouse lymphoma YAC-1 cell line using semi automated MTT assay. 2, 4,6, 8, 10Gy were irradiated at a dose rate of 210cGy/rnin using /sup 60/Co Irradiator ALDORADO 8. After irradiation, YAC-1 cell lines(3×10⁴cells/ml) were exposed to bleomycin or cisplatin for 1 hour. The viable cells were determined for each radiation dose and/or each concentration of drug at the 4th day. And they were compared to control values. The obtained results were as follows : 1. The surviving curve with gentle slope was obtained after irradiation of 2, 4, 6, 8, 10 Gy on YAC-1 cell line. 2. The cytotoxicity of bleomycin or cisplatin was increased significantly at all concentration of 0.2㎍/ml, 2㎍/ml and 20㎍/ml on YAC-1 cell line (P<0.01). And the cytotoxicity of cisplatin was greater than that of bleomycin at all concentration on YAC-1 cell line (P<0.01). 3. There were no significant differences of surviving fractions among 4Gy, 6Gy and 8Gy after irradiation of each radiation dose with 2㎍/ml of bleomycin compared with irradiation only on YAC-1 cell line. 4. There was significant difference of surviving fraction between 2Gy and 10Gy after irradiation of each radiation dose with 2㎍/ml of cisplatin compared with irradiation only on YAC-1 cell line(P<0.05). 5. There were significant differences of surviving fractions between the groups of irradiation only and the groups of irradiation with 2㎍/ml of bleomycin or cisplatin at all doses of 2, 4, 6, 8 and 10Gy on YAC-1 cell line(P<0.05).

• Publications of The Korean Astronomical Society
• /
• v.14 no.1
• /
• pp.33-37
• /
• 1999

We have constructed a synthetic spectrum of the 2.5 micron $C_2H$ bands and compared them with diminutive structures in the near-infrared spectra of Comets P/Halley and West (1976 VI). We found that the Q branches of the $C_2H$ bands coincide with two small emission peaks in the spectra of the comets. We undertook Monte Carlo simulations using observed emission intensities of $C_2$ and possibly $C_2H$ in Comet P/Halley in order to derive a lifetime range of $C_2H$ and a production rate at the time of observations of P/Halley. We obtained a $C_2H$ production rate of $1\times10^{27}\;sec^{-1}$ for P/Halley on December 20, 1985, assuming the 2.5 micron features are due to $C_2H$. We derived a very short lifetime (<100 seconds) of $C_2H$ at 1AU heliocentric distance, assuming that the only parent molecule for $C_2H$ and $C_2$ is $C_2H$. Using this short lifetime we were unable to fit our $C_2$ distribution model to $C_2$ distribution curves observed by O'Dell et al.(1988), because our curve shows a steep slope compared with the observed one. We conclude that there must be significant additional source(s) for $C_2H$ and $C_2$ other than $C_2H_2$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.2
• /
• pp.145-153
• /
• 1984

In the present work, a computer simulation is performed employing Hottel-Whillier-Bliss model for thermal performance of solar collectors. The major collector parameters examined in the computer simulation are: number of transparent glass covers(N), thermal emissivity of the absorbing plate surface (.epsilon.$_{P}$), absorptivity of absorber plate (.alpha.$_{p}$), flow rate per unit area of collector (G), $L_{b}$ / $k_{b}$ of insulation material, tilt angle of collector (S), and solar insolation(I). By varying numerical values of the major collector parameters around their typical values, the corresponding variations in thermal efficiency curves are examined. In addition, an experimental investigation has been carried out with a slightly modified KAIST collector test loop under a real sun condition in order to compare with the simulation results, examine the applicability of the mathematical model of the collector thermal performance, and study the effect of variation of flow rate (G) on thermal efficiency and the range of optimum flow rate.e.

• Journal of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.183-189
• /
• 1981

Iron and titanium, the major constituents in iron ores, were X-ray spectrometrically determined by using the dilution parameter method. A standard and samples possessing a similar composition were diluted with the diluent $ZrO_2$ to their proper respective ratios. After measuring the intensity of the fluorescent X-ray, the dilution parameter was calculated from the following equation. $Pa=\frac{\frac{I_{as}}{(I_{as})_d}}{D-1}{^{-1}}$The dilution parameters were used to correct the difference between the matrix effect of the standard and that of the sample. The content of the major constituents was calculated, without using any standard calibration curves, from the following equation;$W_a=W_a^*{\cdot}{\frac{I_as}{I_{as}^*}{\cdot}\frac{P_a^*}{P_a}$where asterisks indicate the standard. The results agreed with those of the wet analysis within 2% of relative error, and the precision of the experiment was also tolerably good.

• Journal of Sensor Science and Technology
• /
• v.12 no.6
• /
• pp.282-288
• /
• 2003

We report the growth of HgCdTe by metal organic vapor phase epitaxy (MOVPE), using (211)B CdTe/Si substrates grown by molecular beam epitaxy (MBE). The surface morphology of these films is very smooth with hillock free. The etch pit densities (EPD) and full widths at half maximum (FWHM) of x-ray rocking curves exhibited that the crystalline quality of HgCdTe epilayer on MBE grown CdTe/Si was improved compare to HgCdTe on GaAs substrate. The Hall parameters of undoped HgCdTe layers on CdTe/Si showed n-type behavior with carrier concentration of $8{\times}10^{14}/cm^3$ at 77K. But HgCdTe on GaAs showed p-type conductivity due to in corporation of p-type impurities during GaAs substrate preparation. It is thought that these results are applicable for large area HgCdTe forcal plane arrays of $1024{\times}1024$ format and beyound.