• Communications of the Korean Mathematical Society
• /
• v.34 no.1
• /
• pp.105-111
• /
• 2019

Let $Y{\subset}{\mathbb{P}}^3$ be a degree d reduced curve with only planar singularities. We prove that $h^i({\mathcal{I}}_Y(t))=0$, i = 1, 2, for all $t{\geq}d-2$. We use this result and linkage to construct some triples (d, g, s), $d>s^2$, with very large g for which there is a smooth and connected curve of degree d and genus g, $h^0({\mathcal{I}}_C(s))=1$ and describe the Hartshorne-Rao module of C.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.97-110
• /
• 2019

Piles that support offshore wind turbine structures are dominantly subjected to cyclic lateral loads of wind, waves, and tidal forces. For a successful design, it is imperative to investigate the behavior of the cyclic laterally loaded piles; the p-y curve method, in which the pile and soil are characterized as an elastic beam and nonlinear springs, respectively, has been typically utilized. In this study, model pile tests were performed in a 1 g gravitational field so as to investigate the p-y behaviors of cyclic laterally loaded piles installed in saturated dense silty sand. Test results showed that cyclic lateral loads gradually reduced the overall stiffness of the p-y curves (initial stiffness and ultimate soil reaction). This is because the cyclic lateral loads disturbed the surrounding soil, which led to the decrement of the soil resistance. The decrement effects of the overall stiffness of the p-y curves became more apparent as the magnitude of cyclic lateral load increased and approached the soil surface. From the test results, the cyclic p-y curve was developed using a p-y backbone curve method. Pseudo-static analysis was also performed with the developed cyclic p-y curve, confirming that it was able to properly predict the behaviors of cyclic laterally loaded pile installed in saturated dense silty sand.

• 한국기계연구소 소보
• /
• s.14
• /
• pp.101-110
• /
• 1985

Kyung-p-1 main line is characterized by its curves radii of which are considerably small. It is essential for running time reduction of train to improve capabilities of curve negotiation. This improvement can be achieved by designing a bogie with flexible suspension system. The effect of the improvement is mainly concerned in the primary yaw stiffness of bogie suspension. This paper gives a linear analysis for the motion of railway vehicle on curved track and gives also computer simulation results for Semaul Train. The results introduce a conclusion that the primary yaw stiffness of Semaul train is too rigid to be self-steering on Kyung-pu main line curves.

• Journal of the Korean Chemical Society
• /
• v.12 no.2
• /
• pp.39-43
• /
• 1968

The conductivity of polycrystalline NiO is measured in the temperature range of $200^{\circ}C\;to\;800^{\circ}C$ under oxygen pressures from $1.52{\times}10^2\;mmHg\;to\;10^{-4}$ mmHg. The plots of the log ${\sigma}$ vs 1/T at constant oxygen pressure are found to be linear and the activation energies obtained from the slopes of these plots show that the energies are greater under high oxygen pressure than under low pressure. The transition points are found from the curves. The dependence of the conductivity on the $O_2$ pressure, in the above temperature range, is to be regular but it does not obey the theoretical expression, i.e. ${\sigma}=K_{ox}P^{1/6}.$ The activation energies are calculated from the curves at the various condition.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.247-248
• /
• 1996

In order to study the X-ray radiations from solar type strong interacting binary stars, we have collected X-ray data of 44i Bootis (P=0.2678 days, SP=G2+G2) from the EXOSAT data archive. Preliminarly analysis of a part of these data has been already reported by Vilhu & Heise (1986). In this paper, however, we present a more complete light curve in LE region than the previous work, and some unpublished X-ray light curves and spectrums. Using these new materials a new attempt to find the physical explanation about. some observational characteristic figures in the X-ray light curves and spectrums has been made.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.213-220
• /
• 1997

In this study, a design for a shape of centrifugal pump impeller has been performed using a p.c. under a Windows environment. Interaction between a user and a computer has been easily established using the Visual Basic. In determining an outer diameter of an impeller, steps are divided into two, a basic computational step and a refinment step. In this way user can enter his/her experience at the refinment step and hence can expect to lessen the nonlinear nature inherent to the design. In determining a shape of a side view of an impeller, the Bezier cubic curve has been used, and it can be seen that the Bezier cubic curves are well suited in the shape design under a Windows environment. By simply manipulating the four control points, one can generate various cubic curves among which one is selected. Also, a simple method, which can determine the curved position of an impeller vane, has been developed. These data can be used for final CAD drawings.

• Environmental Analysis Health and Toxicology
• /
• v.17 no.1
• /
• pp.63-71
• /
• 2002

The thermal desorption-gas chromatographic (TD-GC) system has been constructed for the measurement of volatile organic compounds. The thermal desortion unit is composed of four major parts: 1) the control part; 2) the thermal desorption part; 3) the focusing part; and 4) the injection part. The peltier element was introduced to the focusing part for the temperature of the focusing tube to reach-35$^{\circ}C$. The system was tested for the linearity of the calibration curves and reproducibility of instrumental analyses using some disinfection by-products (DBPs) and BTXs (benzene, toluene and p-xylene). The coefficients of determination (r$^2$) for all the calibration curves made were higher than 0.998, and the coefficients of variation (CV) for triplicate measurements were all within 10％. The system also has been tested for field applicability. The analysis of field samples showed that there was no breakthrough problem in the sampling system and that the system could be applied to field measurements.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.9 no.1
• /
• pp.63-77
• /
• 2005

The Dirichlet-Neumann problem for the dissipative Helmholtz equation in a connected plane region bounded by closed curves and containing cuts is studied. The Neumann condition is given on the closed curves, while the Dirichlet condition is specified on the cuts. The existence of a classical solution is proved by potential theory. The integral representation of the unique classical solution is obtained. The problem is reduced to the Fredholm equation of the second kind and index zero, which is uniquely solvable. Our results hold for both interior and exterior domains.

• Korean Journal of Microbiology
• /
• v.10 no.1
• /
• pp.1-8
• /
• 1972

This experiment was carried out to investigate the physiological characteristics of isolated bacteria, Ferrobacillus ferooxidans from copper mine water in Korea. The results obtained were as follows ; 1. The optimum pH range for the growth of these bacteria was 2.0-3.0 and optimum temperature was $20^{\circ}C$-$30^{\circ}C$. 2. The oxidation curves of ferrous iron to the ferric iron ran parallel with the growth curves. 3. The optimum nitrogen concentration was 400-800 ppm and the minimal flow rate of air for the maximal growth of the bactria was 70 ml air/min./200ml medium. 4. The growth of these bacteria was inhibited by the absence of ferrous iron and by the addition of sulfur. 5. Ferrous iron at a concentration of 9000 ppm, appeared to be optimum for the most rapid growth of Ferrobacillus ferrooxidans.

• The Korean Journal of Ecology
• /
• v.15 no.1
• /
• pp.47-58
• /
• 1992

This study is to investigate the change of the seasonal patterns of relative water relations parameters by the pressure-volume curves in pinus koraiensis needles. The osmotic potentials at full water saturated(Ψ0, sat) and at incipient plasmolysis(Ψ0, tlp) increased in growing season, while decreased in non-growing season. The maximum bulk modulus of elasticity(Emax), relative water content(RWCTLP), and relativefree water content(FWCtlp) at incipient plasmolysis in non-growing season were higher than these of growing season. The maximum pressure potential(Ψp, max) varied from 1.16 to 2.18MPa, torgor index(TI) varied from 3.1 to 4.7. The osmole number(Ns/dw) and symplastic water (Vo/DW) were variable seasonally. The maximum water content(Vt/DW) and apoplastic water(AW) were relatively high in early growing stage, and then decreased to needle aging. The pressure potential(Ψp) and water potential(Ψ) in winter needles were rapidly decreased with decreasing of relative water content. The matric potential occupied over 10 percent of water potential with less than-2.0 MPa.