• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.158-161
• /
• 2006

Superstrate pin amorphous silicon thin-film (a-Si:H) solar cells are prepared on $SnO_2:F$ and ZnO:Al transparent conducting oxides (TCO) In order to see the effect of TCO/P-layers on a-Si:H solar cell operation. The solar cells prepared on textured ZnO:Al have higher open circuit voltage $V_{oc}$ than cells prepared on $SnO_2:F$. Presence of thin microcrystalline p-type silicon layer $({\mu}c-Si:H)$ between ZnO:Al and p a-SiC:H plays a major role by causing improvement in fill factor as well as $V_{oc}$, of a-Si:H solar cells prepared on ZnO:Al TCO. Without any treatment of pi interface, we could obtain high $V_{oc}$, of 994mv while keeping fill factor (72.7%) and short circuit current density $J_{sc}$ at the same level as for the cells on $SnO_2:F$ TCO. This high $V_{oc}$ value can be attributed to modification in the current transport in this region due to creation of a potential barrier.

• Journal of radiological science and technology
• /
• v.32 no.2
• /
• pp.169-175
• /
• 2009

This study examined 40 healthy volunteers had been tested for their gallbladder (GB) volume and wall thickness by a real time ultrasonography before and after a meal. The results are as follows : 1. The mean values of GB volume were 47.40. (SD 9.05) for male, 35.72. (SD 8.30) for female. 2. The mean value of wall thickness of GB was 2.3 mm (SD 0.3, male, SD 0.5, female). 3. The mean ejection-fraction rates of GB result in 67.20% for male, 63.95% for female. 4. The values of GB volume had significant negative correlations (v = -.487, p < .000, male, v = -.509, p < .000, female) within 4 hours after a meal and significant positive correlations (v = .434, p < .000, male, v = .440, p < .000, female) afterward. 5. The wall thicknesses of GB were significant positive correlations (t = .310, p < .002, male, t = .116, p < .246, female) within 3 hours after a meal and significant negative correlations (t = -.288, p < .010, male, t = -.126, p < 7.10, female) afterward. 6. The relationship between volume and wall thickness of GB showed significant negative correlation.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.613-618
• /
• 2009

We designed new compositions for lead free and low temperature sealing glass frit of $ZnO-V_2O_5-P_2O_5$ system, which can be used for PDP (Plasma Display Panel) or other electronic devices. The $ZnO-V_2O_5-P_2O_5$ system can be used as a sealing material at temperatures even lower than 430$^{\circ}C$. This system, however, showed lower bonding strength with glass substrate compared to commercialized Pb based sealing materials. So, we added $TiO_2$ as a promoter for bonding strength. We examined the effect of $TiO_2$ addition on sealing behaviors of $ZnO-V_2O_5-P_2O_5$ glasses with the data for flow button, wetting angle, temporary & permanent residual stress of glass substrate, EPMA analysis of interface between sealing materials and glass substrate, and bonding strength. As a result, sealing characteristics of $ZnO-V_2O_5-P_2O_5$ system glasses were improved with $TiO_2$ addition, but showed a maximum value at 5 mol% $TiO_2$ addition. The reason for improved bonding characteristics was considered to be the chemical interaction between glass substrate and sealing glass, and structural densification of sealing glass itself.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.1-8
• /
• 1999

In recent years, concern has been raised about the technique of controlling electrical breakdown by using laser in many fields. Especially, laser has attracted much attention in the Electro-Discharge Machining(EDM) because of its many rrents. 1berefore, this research has been perfonred to obtain fundarrental data for the discharge guide technology by a pulsed Nd:YAG laser which can be awJied to discharge processing machining. 1be experilnnts of laser-guided de discharge have been carried out at low air pressure ranging from 0.2 to 20 torr. The minimum laser-guided de discharge voltage $V_{G.min}$ at the given pressures P and distances d between an anode and a cathode was rreasured It is found that $V_{G.min}$ is much lower than the natural discharge voltage $V_{ND}$, and the values of VGrrin and $V_{ND}$ as a function of P.d has a similar tendency. The laser output energy $E_{out}$ decreases with input pulse duration $t_p$ increasing, and the rrore the value of $t_p$ increases, the higher that of V$V_{G.min}$ is obtained because the number of photons N decreases with $t_p$ increasing. In addition, the laser-guided de discharge range and the discharge guide characteristics as laser outpIt $E_{out}$ was investigated.igated.

• Korean Journal of Crystallography
• /
• v.10 no.1
• /
• pp.1-8
• /
• 1999

Two conformational isomers of p-tert-butylcalix[4]arene hexanoate were prepared from the reaction of-p-tert-butylcalix[4]arene and hexanoly chloride in the presence of AlCl3 in CH2Cl2 and their structures were determined by NMR spectra and X-ray diffraction as a cone and a 1,3-alternate conformer, respectively. The crystal of cone conformer (C68H96O8·(CH3)2CO) is triclinic, P, a=15.066(1) , b=16.063(1) , c=16.365(1) , α=79.75(2)o, β=109.95(2)o, γ=80.32(0)o, V=3602.7(4) 3, Z=2. The intensity data were collected on Simens SMART diffractometer/CCD area detector. The structure was solved by direct method and refined by least-squares calculations to a final R value of 0.144 for 4638 observed reflections. The molecular conformation is distorted symmetric cone with the flattening A and D phenyl rings. The crystal of 1,3-alternate conformer (C68H96O8·2CHCl3) is orthorhombic, Pca21, a=34.586(5) , b=10.207(3) , c=20.394(4) , V=7199(3) 3, Z=4. The intensity data were collected on an Enraf-Noninus CAD-4 Diffractometer with a graphite monochromated Mo-K radiation. The structure was solved by direct method and refined by least-squares calculations to a final R value of 0.152 for 2241 observed reflections. The molecule has a pseudo mirror symmetric 1,3-alternate conformation.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.183-186
• /
• 1990

The lattice mismatch between ZnS and Si is negligible because of its value being 0.39%. In this study, $ZnS/_{(P)}Si$ solar cell were fabricated as a layer of ZnS is epitaxially grown on a silicon substrate by PVD method and its photovoltaic properties were measured and discussed. The heat treatment was done after deposition. As the temperature increased up to a certain value, the film has better perfection in crystal structure and electrical characteristics. Measurments of the change that occur in the ZnS films were made by SEM., X-ray diffraction. The optimal thickness of film showned $0.6{\mu}m$, being measured by SEM. The great improvement of the grain growth ZnS film came out after heat-treatment. The result obtained from the $ZnS/_{(P)}Si$ solar cell as follows:short circuit current; $I_{sc}=54mA/cm^2$,open voltage; $V_{oc}=400mV$, fill factor FF=0.72, conversion efficiency; ${\eta}=15.6%$ under the irradiation of 100 ($mW/cm^2$) focused by solar energy. And these are discussed in comparison with other kinds.

• Food Science of Animal Resources
• /
• v.31 no.4
• /
• pp.588-595
• /
• 2011

In this study, the effects of red ginseng extracts (RGE), which has been used as an antioxidant and antimicrobial agent, on pork sausage were evaluated. The treatments were as follows; addition of 0.01% sodium ascorbate (V), 0.5% RGE (T1), 1.0% RGE (T2) and 1.5% RGE (T3) to the basal formula (C). T3 had a significantly higher pH, cooking loss and yellowness ($CIEb^*$) and lower lightness (CIE $L^*$) and redness (CIE $a^*$) than the other samples. The hardness and surface hardness values of 1.5% RGE treated sample were significantly lower (p<0.01) than those of C. However, the cohesiveness values of the RGE samples were higher than the others (p<0.05). In the sensory evaluation, no significant differences in color, taste, texture, juiciness and acceptability were observed among the tested samples, while, the aroma scores of T2 and T3 were higher than those of the C and V samples (p<0.05). The TBARS values of RGE treated groups were higher (p<0.05) than the C sample after 1, 2 and 3 weeks of storage; however, this value did not increase with storage time (p>0.05). When the RGE concentration was high, the reduction in total plate counts and VBN value at week 3 and 4 of storage (p<0.01) decreased. In conclusion, red ginseng extracts seemed to have a positive impact on lipid oxidation, aroma and the microbial characteristics of pork sausage.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.154-159
• /
• 2007

In order to prepare liqueur of Citrus platymamma, 500 g dried peel was soaked in 10 l (5%, w/v) of $30{\sim}95%$ ethanol concentration for 70 days. Changes in pH was $5.19{\sim}4.80$ with 30% ethanol concentration, and the pH was decreased as ethanol concentration decreases for 10 days after soaking. Color a-value was decreased and color b-value was increased according to higher ethanol concentration. Extract was $2.00{\sim}2.19%$ (w/v) with $30{\sim}70%$ ethanol concentration. Acid content was $0.18{\sim}0.21%$ (v/v) with $30{\sim}70%$ ethanol concentration, while $0.13{\sim}0.15%$ (v/v) with 95% ethanol concentration. The contents of fructose and glucose was increased with lower ethanol concentration, and sucrose content was decreased with longer soaking time. Main flavonoids were narirutin, hesperidin, nobiletin, 3,5,6,7,8,3'4'-methoxylated flavone, and tangeretin. Most flavonoids were extracted more than 80% of ethanol for $3{\sim}5$ days soaking. Total polyphenol was $628.8{\sim}711.2$ ${\mu}g/ml$ with $30{\sim}70%$ ethanol concentration for 20 days soaking. Therefore, to prepare Citrus platymamma peel liqueur, it is necessary to soak the material in $50{\sim}70%$ ethanol concentration for 20 days.

• International Journal of Railway
• /
• v.1 no.2
• /
• pp.64-71
• /
• 2008

The quality of track-bed fills of railways has been controlled by field measurements of density $({\gamma}_d)$ and the results of plate-load tests. The control measures are compatible with the design procedures whose design parameter is $k_{30}$ for both ordinary-speed railways and high-speed railways. However, one of fatal flaws of the design procedures that there are no simple laboratory measurement procedures for the design parameters ($k_{30}$ or, $E_{v2}$ and $E_{v2}/E_{v1}$) in design stage. A new quality control procedure, in parallel with the advent of the new design procedure, is being proposed. This procedure is based upon P-wave velocity involving consistently the evaluation of design parameters in design stage and the field measurements during construction. The Key concept of the procedure is that the target value for field compaction control is the P-wave velocity determined at OMC using modified compaction test, and direct-arrival method is used for the field measurements during construction. The procedure was verified at a test site and the p-wave velocity turned out to be an excellent control measure. The specifications for the control also include field compaction water content of OMC${\pm}$2% as well as the p-wave velocity.

• Journal of Environmental Science International
• /
• v.13 no.3
• /
• pp.245-250
• /
• 2004

The SBR(Sequencing Batch Reactor) process is ideally suited to treat high loading wastewater due to its high dilution rate. SBR operates by a cycle of periods consisting of filling, reacting, settling, decanting and idling. The react phases such as aeration or non-aeration, organic oxidation, nitrification, denitrification and other bio-logical reactions can be achieved in a reactor. Although the whole reactions can be achieved in a SBR with time distributing, it is hard to manage the SBR as a normal condition without recognizing a present state. The present state can be observed with nutrient sensors such as ${NH_{4}}^{+}-N$, ${NO_{2}}^{-}-N$, ${NO_{3}}^{-}-N} and ${PO_{4}}^{ 3-}-P.$ However, there is still a disadvantage to use the nutrient sensors because of their high expense and inconvenience to manage. Therefore, it is very useful to use common on-line sensors such as DO, ORP and pH, which are less expensive and more convient. Moreover, the present states and unexpected changes of SBR might be predicted by using of them. This study was conducted to get basic materials for making an inference of SBR process from ORP(oxidation reduction potential) of synthetic wastewater. The profiles of ORP, DO, and pH were under normal nitrification and denitrification were obtained to compare abnormal condition. And also, nitrite and nitrate accumulation were investigated during reaction of SBR. The bending point on ORP profile was not entirely in the low COD/NOx ratio condition. In this case, NOx was not entirely removed, and minimum ORP value was presented over -300mV. Under suitable COD/NOx ratio which complete denitrification was achieved, ORP bending point was observed and minimum ORP value was under -300m V. Under high COD/NOx ratio, ORP bending point was not detected at the first subcycle because of the fast denitrification and minimum ORP value was under -300mV at the time.