• Nonlinear Functional Analysis and Applications
• /
• v.27 no.2
• /
• pp.349-361
• /
• 2022

In this paper, we study the following nonlinear problem: $$\{-\Delta_{p}^{3}(x)u\;=\;{\lambda}V_{1}(x){\mid}u{\mid}^{q(x)-2}u\;in\;{\Omega},\\u\;=\;{\Delta}u\;{\Delta}^{2}u\;=\;0\;on\;{\partial}\Omega, $$ under adequate conditions on the exponent functions p, q and the weight function V₁. We prove the existence and nonexistence of eigenvalues for p(x)-triharmonic problem with Navier boundary value conditions on a bounded domain in ℝ^N. Our technique is based on variational approaches and the theory of variable exponent Lebesgue spaces.

• Journal of the Korean Physical Society
• /
• v.81
• /
• pp.867-875
• /
• 2022

This paper explored the effect of deposition conditions on the characteristics of copper oxide (CuO_x) thin films prepared by direct current (DC) magnetron sputtering. X-ray diffraction exhibited that CuO with n-type conductivity was the main composition regardless of the DC magnetron sputtering power whereas the phase transition from n-type CuO to p-type Cu₂O was observed with decreasing the oxygen pressure (OP) from 40 to 20%. The optical band gap ranges of 1.6-1.9 eV, which are characteristic of n-type CuO, were determined for samples prepared with OPs of 30-40% while the optical band gap of 2.3 eV, which is characteristic of p-type Cu₂O, was measured for samples prepared with an OP of 20%. In addition, only Cu⁺ X-ray photoelectron spectroscopy (XPS) peak at the ~932.6 eV position exists in the films deposited with an OP of 20%, whereas only Cu²⁺ XPS peaks at ~934.2 eV and in the range of 940-945 eV are observed in the films deposited with an OP of 40%. Furthermore, as a result of XPS depth profile analysis, it was confirmed that the composition ratio of the sample prepared at an OP of 20% was Cu₂O, whereas the composition ratio of the sample prepared at an OP of 40% was CuO. These suggest that the CuO_x thin films could be constantly converted from n-type CuO to p-type Cu₂O by decreasing the oxygen partial pressure. Thin film transistors with Cu₂O deposited at 20% OP revealed p-type characteristics such as onset voltage (V_ON) of -3 V, saturated hole mobility of 8 cm²/Vs at V_GS = -28 V, subthreshold swing of 0.86 V/decade at V_GS-V_ON = -0.5 V, and on/off ratio of 1.14 × 10³.

• Clinical and Experimental Vaccine Research
• /
• v.12 no.1
• /
• pp.13-24
• /
• 2023

This systematic and meta-analysis aims to evaluate humoral and cellular responses to the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) vaccine among kidney transplant recipients (KTRs). We conducted a systematic literature search across databases to evaluate seroconversion and cellular response rates in KTRs receiving SARS-CoV-2 vaccines. We extracted studies that assessed seroconversion rates described as the presence of antibody de novo positivity in KTRs following SARS-CoV-2 vaccination published up to January 23rd, 2022. We also performed meta-regression based on immunosuppression therapy used. A total of 44 studies involving 5,892 KTRs were included in this meta-analysis. The overall seroconversion rate following complete dose of vaccines was 39.2% (95% confidence interval [CI], 33.3%-45.3%) and cellular response rate was 41.6% (95% CI, 30.0%-53.6%). Meta-regression revealed that low antibody response rate was significantly associated with the high prevalence of mycophenolate mofetil/mycophenolic acid (p=0.04), belatacept (p=0.02), and antiCD25 induction therapy uses (p=0.04). Conversely, tacrolimus use was associated with higher antibody response (p=0.01). This meta-analysis suggests that postvaccination seroconversion and cellular response rates in KTRs are still low. And seroconversion rate was correlated with the type of immunosuppressive agent and induction therapy used. Additional doses of the SARS-CoV-2 vaccine for this population using a different type of vaccine are considered.

• Journal of Fashion Business
• /
• v.17 no.6
• /
• pp.111-124
• /
• 2013

The purpose of this research was to conduct a comparison analysis of color in the characteristics and image of Korea/China/Japan airline uniforms. Research subjects for this research included 19 Korean, Chinese and Japanese airlines servicing the Incheon International Airport in South Korea. The analysis methods are based on the Munsell Color Order System and PCCS (Practical Color Coordinate System) tone classification in order to examine the color characteristics. For the color image analysis, the present research performed a positioning on Shigenobu Kobayashi's color images scale with adjectives in order to compare the resulting differences. As a result of the analysis, this research discovered the following; First, achromatic colors were found to be used most frequently in flight attendant uniforms of Korea/China/Japan. In Korean flight attendant uniforms, YR/Y, GY and B/PB/P; in Chinese, R/PB, RP, YR/Y/GY and BG/P; in Japanese, RP, R/P/PB and Y/BG were found in order. As for the main uniform colors, Korean flight attendant uniforms were found to be in the colors YR, and R/GY/B/P; Chinese flight attendant uniforms, R, PB, and P/B; and Japanese flight attendant uniforms, R, BG, B, RP and N. Second, Korean flight attendant uniforms used W and It most frequently; China flight attendant uniforms, W; and Japanese flight attendant uniforms, W and v. Regarding the main colors, Korean flight atteddant uniforms used lt/g and v/p; Chinese flight attendant uniforms, v, dp and s/d/dkg; and Japanese flight attendant uniforms, v/dkg and Bk. Third, after positioning each country's uniform color combination bars on the Kobayashi image scale, Korean flight attendant uniforms showed classic images along with casual/pretty/elegant/chic images; Chinese flight attendant uniforms displayed, casual images as well as, dynamic/gorgeous/chic/cool casual/dandy images; and finally, Japanese flight attendant uniforms converyed dandy images along with casual/gorgeous images. This research findings indicate that Korea/China/Japan airlines' flight attendant uniforms seek for differentiated image establishment by reflecting their own CIs and unique national cultures in the uniform color marketing.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.25-30
• /
• 2022

Mackinawite (FeS), as a ubiquitous reduced iron mineral, is known as a key controller of redox reactions in anaerobic subsurface environment. The reaction of FeS with redox-sensitive toxic element such as arsenic is substantially affected by pH conditions of the given environments. In this study, the interaction of As(V) with FeS was studied under strict anaerobic conditions with various pH conditions. The pH-dependent arsenic removal tests were conducted under wide ranges of pH conditions and X-ray absorption spectroscopy (XAS) was applied to investigate the reaction mechanisms under pH 5, 7, and 9. The removal efficiency of FeS for As(V) showed the higher removal of As(V) under low pH conditions and its removal efficiency decreased with increasing pH, and no As(V) reduction was observed in 1 g/L FeS solution. However, XAS analysis indicated the reduction of As(V) to As(III) occurred during reaction between FeS and As(V). The reduced form of As(III) was particularly identified as an arsenic sulfide mineral (As₂S₃) in all pH conditions (pH 5, 7, and 9). As₂S₃ precipitation was more pronounced in pH 5 where the solubility of FeS is higher than in other pH conditions. The linear combination fitting results of XAS demonstrated that As(V) removal mechanism is concerted processes of As₂S₃ precipitation and surface complexation of both arsenic species.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.36-43
• /
• 2019

In this paper, a novel channel access scheme for the next-generation vehicle to anything (V2X) system based on IEEE 802.11p standard which is applied to recent connected car technologies is suggested and analyzed. The proposed scheme proposes a channel access method utilizing OFDMA multi-user transmission for IEEE 802.11p based system. In this paper, the authors examine geographical distance and network area performance of IEEE 802.11p system and the proposed scheme. Results of this research show that the proposed scheme is quite suitable for improving conventional V2X standards and systems. This paper also provides mathematical analysis and simulation results of the conventional IEEE 802.11p system and the proposed scheme.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.10
• /
• pp.883-888
• /
• 2007

Investigation of improving the properties of UV detector which uses the wide bandgap of ZnO are under active progress. The present study focused on the design and fabrication of i-ZnO/p-inversion $layer/n^--Si$ Epi. which is characterized with very thin p-type inversion layer for UV detectors. The i-ZnO thin film for achieving p-inversion layer which was grown by RF sputtering at $450^{\circ}C$ and then annealed at $400^{\circ}C$ in $O_2$ gas for 20 min shows good intrinsic properties. High (0002) peak intensity of the i-ZnO film is shown on XRD spectrum and it is confirmed by XPS analysis that the ratio of Zn : O of the i-ZnO film is nearly 1 : 1. Measurement shows high transmission of 79.5 % in UV range (< 400 nm) for the i-ZnO film. Measurement of $V_r-I_{ph}$ shows high UV photo-current of 1.2 mA under the reverse bias of 30 V.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10A
• /
• pp.816-822
• /
• 2011

This paper provides the performance measurement and analysis of Wireless LAN IEEE 802.11 in a mobile environment. The performance of IEEE802.11b/g and IEEE802.11p that is designed for Vehicle-to-Vehicle(V2V) communication is measured and analyzed. Diameter of communication, link access time and delay are measured as vehicle's speed varies. Also, the performance is checked in a situation that the load to network varies. In conclusion, the futher research topics are discussed.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.189-193
• /
• 2000

Arsenic (III) and arsenic (V) in disused mine tailing samples have been determined simutaneuously by hydride generation inductively coupled plasma atomic emission spectrometry (HG-ICP-AES). Total arsenic was determined using 2% $NaBH_4$ and 6 M HCl after prereduction of As(V) to As(III) with) 1M KI. Arsenic (III) was determined selectively using citrate/citric acid buffer with range of pH 5-6, it was determined by HG-ICP-AES. Arsenic (V) can be evaluated by the differences. According to the results, arsenic (V) was over 90% among the total arsenic extracted from disused mine tailing samples.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.621-627
• /
• 2008

In this study, a technique of speciation and determination of the trace inorganic arsenic(As(III) and As(V)) in water sample using HPLC-DRC-ICP-MS has been developed. Isocratic mobile phase of 10 mM ammonium nitrate and 10 mM ammonium phosphate monobasic was used and methanol(5 v/v%) was used as flushing solvent. Selection of the best flow rate of reaction gas, O$_2$, and optimization of the parameters such as pH and flow rate of mobile phase, and injection volume of sample for the separation and detection of arsenic species were carried out. The oxygen flow rate of 0.5 mL/min, pH of 9.4 and flow rate of 1.5 mL/min of mobile phase, and injection volume of sample of 100 $\mu$L were found to be the best parameters for the speciation and determination of arsenic species. The analytical features of the method were detection limit 0.10 and 0.08 $\mu$g/L, precision(RSD) 4.3% and 3.6%, and recovery 95.2% and 96.4% for As(III) and As(V), respectively. Analysis time was 4 minutes per sample. Linear calibration graphs with r$^2$ = 0.998 were obtained for both As(III) and As(V). Speciation analysis of arsenic species in the raw water samples collected from the tributary streams to Han River and main stream of Paldnag were performed by the proposed method. The concentrations of As(III) ranged from 0.10 to 0.22 $\mu$g/L and As(V) concentrations ranged from 0.44 to 1.19 $\mu$g/L, and 93.5% of total arsenic was found to be As(V).