• Korean Journal of Weed Science
• /
• v.8 no.2
• /
• pp.199-207
• /
• 1988

The study was intended to know any relations between the rice tolerance to oxyfluorfen and varietal speciation in seed protein composition or any enzymatical allelies with or without chemical treatment. Rice varieties used were Chokoto, Aichiasahi, Agabyeo, IR 3941 and Tablei as the tolerant group, and Mushakdanti, Weld Pally, HP 1033, HP 857, and HP 907 as the susceptible, respectively. Electrophoretic methods used were SDS-PAGE for seed protein, 7% PAGE for isozymes (acid phosphatase and peroxidase from rice seedling) and changes in isoenzyme activity (malate dehydrogenase, peroxidase and esterase) as affected by oxyfluorfen treatment ($10^{-4}M$) was also studied. The results are summarized as follows. -Among 19 bands separated in seed proteins, two different rice groups selected in terms of tolerance were clustered in dissimilarity. This was based on 2 facts in that G band was not present in susceptible varieties and that less activity of H, N, O, P, Q, Rand S band was shown. -Among 4 bands separated in acid phosphatase, the presence of (band and lower activity of B band was specific for tolerant varieties. For 4 minor bands separated in peroxidase, the tolerant varieties had no activity in B band and higher activity in A, C, D bands. -Time-course study of isozymes as affected by $10^{-4}M$ oxyfluorfen showed that Chokoto, the tolerant varieties, had little activity in A band and consistently higher activities in Band C bands for malate dehydrogenase. For 5 bands separated in peroxidase, B band was not found in Chokoto while A, C, D, and E bands were consistently present. Esterase was separated into about 4 bands in which Chokoto had maintained higher activities in A, C and D bands.

• The Korean Journal of Mycology
• /
• v.15 no.1
• /
• pp.48-69
• /
• 1987

To understand host ranges and host specificity of ectomycorrhizal fungi and fungus specificity of host tree species, higher fungi from pure forest stands of following twelve tree species were collected for six years from 1981 to 1986: Pinus densiflora, P. rigida, P. koraiensis, Picea koraiensis, Larix leptolepis, Abies holophylla, Populus $alba{\times}glandulosa$, Castanea crenata, Quercus aliena, Q. acutissima, Q. mongolica, and Betula platyphylla. A total of 196 ectomycorrhizal species with 8 varieties in 48 genera were identified. Thirty-one species with one variety belonged to Russula, 22 species with 5 varieties to Amanita, 18 species with one variety to Lactarius. Fungi belonging to above three gepera, Laccaria, and Cantharellus had a relatively wide host range. Laccaria laccata was collected under all the 12 tree species, Amanita vaginata group under 11 tree species, Laccaria amethystina and Russula foetens under 10 tree species, Lactarius gerardii and Russula sororia under 9 tree species, and Amanita agglutinata, Cantharellus cibarius, Russula bella, and R. virescens under 8 tree species. Above 10 fungal species may be classified to have a wide host range. Following fungi were collected under 4 to 5 tree species of both conifers and broad-leaved trees: Amanita citrina, Boletus bicolor, B. erythropus, Lactarius piperatus, L. subzonar­ius, and Russula pseudodelica. Above fungi may be classified to have an intermediate host range. Chroogomphus, Gomphidius, Rhizopogon, and Suillus were collected only under Pinaceae and may be classified to have a narrow host range. Particularly Suillus grevillei was collected only under Larix leptolepis, and appeared to have high host specificity. A total of 83 ectomycorrhizal species were collected under Abies holophylla, 66 species under Pinus densiflora, 50 species under Pinus rigida, 49 species under Pinus koraiensis, 46 species under Quercus aliena, and 23 fungal species under Larix leptolepis. Particularly, Larix leptolepis was associated with different fungal flora, with fewer species of Amanita, Lactarius and Russula, and more species of Laccaria. Most host tree species surveyerl in the present study appeared to have low fungus specificity for ectomycorrhizal formation.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.599-606
• /
• 2002

This study was carried out to determine the physico-chemical components and to examine it the consumers can tell the difference in eating quality of loins of Hanwoo with grade and sex. Loins of 36 carcasses were selected and their intramuscular fat, color, pH, water holding capacity, shear force, the amount of myoglobin and moisture content were measured. The result was that only intramuscular fat was significantly different with grades. In Pearson correlation coefficients among quality factors, moisture content increased significantly with the amount of myoglobin(0.514) and shear force(0.503) and decreased as intramuscular fat(－0.957) and water holding capacity(－0.491) increased. Also, content of intramuscular fat decreased as shear force(－0.565) increased. According to descriptive analysis, aroma and acceptability in the 2nd grade steer showed the highest score. Aroma, juiciness and tenderness may affect acceptability of cooked meat. Also, juiciness, tenderness and acceptability had a negative correlation with moisture content and the intramuscular fat did not affect tenderness directly.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.2
• /
• pp.113-126
• /
• 1988

Paralytic shellfish poison(PSP) accmulate in shellfish as a result of feeding toxic dinoflagellates. The shellfish do not seem to be harmed by the toxins, but become toxic to humans and other animals that feed on them. The purpose of this study was to investigate the distribution and changes of PSP by species of shellfish, collected area and collected month. Also, the correlation between PSP and toxic dinoflagellate, Protogonyaulax tamarensis, was investigated. Five hundred and six samples of 13 kinds of shellfish for PSP bioassay were collected at the shellfish growing area of Pusan, Masan, Chungmu, $Samch\check{o}npo, Y\check{o}su, Mokpo and Daech\check{o}n$ located in South Korea during the study period from May, 1985 to Octcber, 1987. Most of the samples submitted were free from PSP except sea mussel, short - necked clam and ark shell. Among the intoxicated samples, PSP was most often detected in sea mussel. PSP was detected mainly in spring$(February\~May)$ in the southern coast of Korea. In case of Pusan, exceptionally, toxic sea mussel have been found even June and July in 1987. The toxicity score of toxic shellfishes examined was ranged from 23.44 to $150.26{\mu}g/100g$ of edible meat and toxicity of sea mussel was higher than other toxic shellfishes. By the study of anatomical distribution of PSP in sea mussel collected at Masan in Febuary and March, 1986, the toxin accumulated in digestive gland was about $70\%$ of all. There was no significant correlation between toxicity of sea mussel and cell numbers of P. tamarensis that one of the causitive organism of PSP during the studying period in Masan area. There was almost no difference in toxicity of sea mussel by water depth of collection, but toxicity of surface shellfish was a little higher than those of 3.5, and 7.0m depth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.98-107
• /
• 2004

Proper finishing/polishing of dental restorations are critical clinical procedures that enhance both esthetics and longevity of restored teeth. This study was to compare the effects of immediate and delayed finishing/polishing procedures on the surface roughness and surface hardness of tooth-colored restoratives including two microfilled composite resins, such as Filtek A110 and Silux Plus, two hybrid composite resins, such as Revolution formular2 and Palfique Estelite. A total of 48 specimens were made for each material. The first 16 specimens served as the control group and the remaining 32 specimens were randomly divided into two equal groups. The control group was stored in distilled water at $37^{\circ}C$ for 1 week after light polymerization against the Mylar sheet. The first experimental group was finished/polished immediately after light polymerization and stored for 1 week in distilled water at $37^{\circ}C$, whereas the while the second group was finished/polished 1 week after light polymerization and stored in distilled water at $37^{\circ}C$. The results were as follows: 1. The smoothest surface was produced by Mylar sheet and finishing/polishing procedure increased the surface roughness. However, the surface roughness of composite resins were not influenced by the finishing/polishing timing. 2. There were significant differences about surface roughness between Revolution formular 2 and Silux Plus, regarding immediate finishing/polishing, and between Palfique Estelite and Silux Plus regarding delayed finishing/polishing(p<0.05). 3. The sequence of the surface hardness was ascending order by Revolution formular 2, Silux Plus, Filtek A110 and Palfique Estelite. However there were no significant differences about hardness among the control group and two finishing/polishing timing groups. 4. The effects of finishing/polishing time on surface roughness and hardness appeared to be material-dependent.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.349-354
• /
• 2011

Our objective in this study is to assess the safety of docosahexaenoic acid (DHA) fortified milk of dairy cows fed feeds containing protected fish oil treated with formaldehyde by analyzing formaldehyde concentration in commercial milk and DHA fortified milk of dairy cows fed formaldehyde treated feed. There are 3 milk samples in this study: Commercial milk (CM), DHA fortified milk for Kid (DHA-K) and DHA fortified milk for Baby (DHA-B). We confirm the fresh quality of these three samples by physicochemical tests. In fat content result, three groups are significantly different at the p < 0.05 by Duncan's multiple range test, but fat content of group DHA-K is about half the level of the other two groups. Protein content of group DHA-K is 1 % higher than other two groups. According to the analysis result of DHA content of DHA fortified milk, DHA content of DHA-B is two-fold higher than DHA-K. Similar pattern was seen in the intake based on age. According to HPLC analysis result of formaldehyde concentration in milk, commercial milk and DHA fortified milk are between 0.013 ppm and 0.057 ppm which is formaldehyde standard level in fresh milk settled in WHO (World Health Organization). Three groups have no significantly differences at the p < 0.05 by Duncan's multiple range test. For this reason, it can be concluded that there is no transition of formaldehyde from dairy cows fed formaldehyde treated feeds to its produced milk. Safety about formaldehyde of DHA fortified milk of dairy cows fed formaldehyde treated feeds is considered similar to commercial milk.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.3
• /
• pp.215-221
• /
• 1994

Background: It is well known that oxygen free radicals(OFR) play a vital role in the various type of acute lung injury. Among various antioxidant defense mechanisms, the superoxide dismutases(SOD) are thought to be the first line of antioxidant defense by catalyzing the dismutation of two superoxide radicals to yield hydrogen peroxide and oxygen. Eukaryotic cells contain two types of intracellular SOD : cytosolic, dimeric copper/zinc- containing enzyme(CuZnSOD) and mitochondrial, tetrameric manganese-containing enzyme(MnSOD). The purpose of this study is to evaluate the time-dependent gene expression of MnSOD and CuZnSOD in the endotoxin-treated rats, and to compare with the manifestations of LPS-induced acute lung injury in rats. Methods: Total RNA from rat lung was isolated using single step phenol extraction 0, 1, 2, 4, 6, 12, 18, 24 hours after E. coli endotoxin injection(n=3, respectively). RNA was separated by formaldehyde-containing 1.2% agarose gels elctrophoresis, transblotted, baked, prehybridized, and hybridized with $^{32}P$-labeled cDNA probes for rat MnSOD and CuZnSOD, which were kindly donated by Dr. Ho(Duke University, Durham, NC, USA). The probes were labeled by nick translation. Blots were washed and autoradiography were quantitated using laser densitometry. Equivalent amounts of total RNA/gel were assessed by monitoring 28S and 18S rRNA. Results: Endotoxin caused a rise in steady-state MnSOD mRNA levels by 4h with peak mRNA accumulation by 6h. Continued MnSOD mRNA expression was observed at 12h. CuZnSOD mRNA expression was observed from 1h to 24h with peak levels by 18h. Conclusion: These results suggest that SOD palys an important defensive role in the endotoxin-induced acute lung injury in rats.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.148-156
• /
• 2008

Statement of problems: Self-etch adhesives exhibit some clinical benefits such as ease of manipulation and reduced technique-sensitivity. Nevertheless, some concern remains regarding the bonding effectiveness of self-etch adhesives to enamel, in particular when so-called 'mild' self-etch adhesives are employed. This study compared the microtensile bond strengths to ground enamel of the two-step self-etch adhesive Clearfil SE Bond (Kuraray) to the three-step etch-and- rinse adhesive Scotchbond Multi-Purpose (3M ESPE) and the one-step self-etch adhesive iBond (Heraeus Kulzer). Purpose: The purpose of this study was to determine the effect of a preceding phosphoric acid conditioning step on the bonding effectiveness of a two-step self-etch adhesive to ground enamel. Material and methods: The two-step self-etch adhesive Clearfil SE Bond non-etch group, Clearfil SE Bond etch group with prior 35% phosphoric acid etching, and the one-step self-etch adhesive iBond group were used as experimental groups. The three-step etch-and-rinse adhesive Scotchbond Multi-Purpose was used as a control group. The facial surfaces of bovine incisors were divided in four equal parts cruciformly, and randomly distributed into each group. The facial surface of each incisor was ground with 800-grit silicon carbide paper. Each adhesive group was applied according to the manufacturer's instructions to ground enamel, after which the surface was built up using Light-Core (Bisco). After storage in distilled water at $37^{\circ}C$ for 1 week, the restored teeth were sectioned into enamel beams approximately 0.8*0.8mm in cross section using a low speed precision diamond saw (TOPMET Metsaw-LS). After storage in distilled water at $37^{\circ}C$ for 1 month, 3 months, microtensile bond strength evaluations were performed using microspecimens. The microtensile bond strength (MPa) was derived by dividing the imposed force (N) at time of fracture by the bond area ($mm^2$). The mode of failure at the interface was determined with a microscope (Microscope-B nocular, Nikon). The data of microtensile bond strength were statistically analyzed using a one-way ANOVA, followed by Least Significant Difference Post Hoc Test at a significance level of 5%. Results: The mean microtensile bond strength after 1 month of storage showed no statistically significant difference between all adhesive groups (P>0.05). After 3 months of storage, adhesion to ground enamel of iBond was not significantly different from Clearfil SE Bond etch (P>>0.05), while Clearfil SE Bond non-etch and Scotchbond Multi-Purpose demonstrated significantly lower bond strengths (P<0.05), with no significant differences between the two adhesives. Conclusion: In this study the microtensile bond strength to ground enamel of two-step self-etch adhesive Clearfil SE Bond was not significantly different from three-step etch-and-rinse adhesive Scotchbond Multi-Purpose, and prior etching with 35% phosphoric acid significantly increased the bonding effectiveness of Clearfil SE Bond to enamel at 3 months.

• Journal of the Korean Geographical Society
• /
• v.44 no.2
• /
• pp.122-145
• /
• 2009

Terrain parameters calculated from digital elevation models (DEM) have become increasingly important in current spatially distributed models of earth surface processes. This paper investigated how the ability of upslope area for predicting the spatial distribution of soil properties varies depending on the selection of spatial resolutions of DEM and algorithms. Four soil attributes from eight soil-terrain data sets collected from different environments were used. Five different methods of calculating upslope area were first compared for their dependency on different grid sizes of DEM. Multiple flow algorithms produced the highest correlation coefficients for most soil attributes and the lowest variations amongst different DEM resolutions and soil attributes. The high correlation coefficient remained unchanged at resolutions from 15 m to 50 m. Considering decreasing topographical details with increasing grid size, we suggest that the size of 15-30 m may be most suitable for soil-landscape analysis purposes in our study areas.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.9
• /
• pp.3911-3914
• /
• 2014

Background: To determine the potential clinical utility of tumor markers CEA, TPA, and SCC-Ag for early detection of cervical precancerous lesions. Materials and Methods: A case-control study was carried out on 120 women (46 patients with histologically confirmed cervical precancerous lesions and 74 healthy controls). The significance of serum selected tumor markers in early detection of cervical intraepithelial neoplasia (CIN) were assessed. Results: Of the case group, the rates of CIN I, II, III, was 69.6%, 23.9%, and 6.5%, respectively. According to the manufacturer's cut-off values of 2ng/ml, 5ng/ml, and 70 U/ml for SCC-Ag, CEA and TPA tests, in that order, SCC-Ag test had a sensitivity of 13%, but CEA and TPA tests could not distinguish between case and control groups. The diagnostic sensitivities were highest at cut-off values of 0.55 ng/ml for SCC-Ag, 2.6ng/ml for CEA, and 25.5 U/ml for TPA which were 93%, 61%, and 50%, respectively. However, the area under the receiver operating characteristic curve was the largest for SCC-Ag (0.95 vs. 0.61 and 0.60 for CEA and TPA, respectively). Moreover, there was a highly significant direct correlation between SCC-Ag concentration and the degree of cervical precancerous lesions (r=0.847, p<0.001). Conclusions: The new cutoff of 0.5 for SCC-Ag test might be useful as a tumor marker in Iranian patients with CIN and it needs to be more evaluated by studies with larger populationa.