• 센서학회지
• /
• 제8권6호
• /
• pp.476-480
• /
• 1999

PLD 법을 이용하여 PbSe 박막을 p-Si(100) 기판 위에 성장시켰다. 성장온도에 따른 박막의 결정구조를 조사하기 위하여 기판온도를 RT${\sim}400^{\circ}C$로 변화시키면서 박막을 제작하였다. 여러 기판온도에서 제작한 PbSe 박막의 XRD 패턴과 PbSe(200) rocking curve의 반치폭(FWHM)을 분석한 결과, 성장온도 $200^{\circ}C$에서 제작한 박막이 가장 양호한 결정성을 나타냈다. 또한 AFM으로 관찰한 PbSe 박막의 표면형태도 $200^{\circ}C$에서 성장시킨 박막의 표면입자들이 가장 규칙적인 배열을 보였다. Hall 측정결과, PbSe 박막은 n-type 반도체임을 알 수 있었고, 전류-전압 특성 곡선은 전형적인 p-n junction 현상을 나타냈다. 또한 n-type 반도체인 PbSe 박막의 전기전도도는 일반적인 반도체의 값보다 약간 큰 것으로 확인되었다.

• 대한수학회지
• /
• 제52권4호
• /
• pp.699-725
• /
• 2015

In this paper, we study the estimation for algebraic polynomials in the bounded and unbounded regions bounded by piecewise Dini smooth curve having interior and exterior zero angles.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.272-277
• /
• 2001

In order to evaluate variation of fatigue data of the LP steam turbine blade steel, it is important to estimate P - S - N curves to accurately define the probability distributions. In this study, new procedure is introduced to determine the expression of P - S - N curves. For this purpose, 3-parameter Weibull distribution was found to be most appropriate among assumed distributions when the probability distributions of the fatigue life were examined by the proposed analysis. Furthermore, parameter estimation for P - S - N curves was performed using various optimization to maximize the correlation coefficient. As a result of this, sequential linear programing method is used for estimation of P - S - N curves.

• 한국환경보건학회지
• /
• 제38권5호
• /
• pp.438-447
• /
• 2012

Objective: The objective of this study was to suggest a method through which load duration curve was used to assess the achievement of water quality targets in accordance with the criteria for pollutant load depending on flow rate variation. Methods: The stage-discharge curve and flow duration curve of Jungnang Stream were deduced. Using water quality targets and measurement of the stream, the flow duration curve was also drawn. Based on these, the feasibility of achievement of water quality targets in respect to flow rate was assessed. Results: In terms of the load duration curve of the stream, it was observed that excess of criteria for concentrations of $BOD_5$, $COD_{Mn}$ and SS frequently occurred. On the other hand, when the flow rate was low, the concentrations of T-N and T-P exceeded the criteria. Conclusions: Through the load duration curve, the overall water quality of Jungnang Stream was understood. When the flow rate is high, management of point source of $BOD_5$, $COD_{Mn}$ and SS is needed to achieve water quality targets for Jungnang Stream. On the other hand, when the flow rate is low, the management of non-point source T-N and T-P is necessary to attain the water quality goal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.408-409
• /
• 2007

Al-doped p-type ZnO films were fabricated on n-Si (100) and homo-buffer layers in pure oxygen at $450^{\circ}C$ by RF magnetron sputtering. Target was ZnO ceramic mixed with 2wt% $Al_2O_3$. XRD spectra show that the Al-doped ZnO thin films have ZnO crystal structure and homo-buffer layers are beneficial to Al-doped ZnO films to grow along c-axis. Hall Effect experiments with Van der Pauw configuration show that p-type carrier concentrations are ranged from $1.66{\times}10^{16}\;to\;4.04{\times}10^{18}cm^{-3}$, mobilities from 0.194 to $2.3cm^2V^{-1}s^{-1}$ and resistivities from 7.97 to $18.4{\Omega}cm$. P-type sample has density of $5.40cm^{-3}$ which is smaller than theoretically calculated value of $5.67cm^{-3}$. XPS spectra show that O1s has O-O and Zn-O structures and A12p has only Al-O structure. P-ZnO:Al/n-ZnO:Al junctions were fabricated by magnetron sputtering. V-I curves show that the p-n junctions have rectifying characteristics.

• 대한수학회지
• /
• 제60권5호
• /
• pp.1087-1107
• /
• 2023

Let E be an elliptic curve defined over ℚ of conductor N, c the Manin constant of E, and m the product of Tamagawa numbers of E at prime divisors of N. Let K be an imaginary quadratic field where all prime divisors of N split in K, P_K the Heegner point in E(K), and III(E/K) the Shafarevich-Tate group of E over K. Let 2u_K be the number of roots of unity contained in K. Gross and Zagier conjectured that if P_K has infinite order in E(K), then the integer c · m · u_K · |III(E/K)| $\frac{1}{2}$ is divisible by |E(ℚ)_tor|. In this paper, we prove that this conjecture is true if E(ℚ)_tor ≅ ℤ/2ℤ or ℤ/4ℤ except for two explicit families of curves. Further, we show these exceptions can be removed under Stein-Watkins conjecture.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.129-135
• /
• 1997

Previous studies has shown that the curve of low-cycle fatigue life was not expressed with the single line subjected to Manson-Coffin's law type and bent to short life in low ${\Delta}{\varepsilon}_p$ region. The main cause of this phenomenon has been considered that the localization of plastic strain in the crack initiation process fosters the crack initiation. In this study, the low-cycle fatigue life was investigated for each specimens omitted crack initiation process and it was found that fatigue life curve in log(${\Delta}{\varepsilon}_p$)-log($N_f$)was bent in low ${\Delta}{\varepsilon}_p$ region as ever. Therefore, the main cause of appearance of knee point in fatigue life curve is not found in the crack initiation process but in the crack propagation process. In the crack propagation process, the localization of the plastic strain in the vicinity of crack tip and the influence of test environment on the crack propagation rate were observed and these inclinations were more remarkable in low ${\Delta}{\varepsilon}_p$ region. Hence, it was concluded that these two phenomena in the crack propagation process were proved to the main cause which accelerates the crack propagation in low ${\Delta}{\varepsilon}_p$ region and bent the fatigue life curve in result.

• 한국정보통신학회논문지
• /
• 제25권8호
• /
• pp.1095-1102
• /
• 2021

성능과 하드웨어 복잡도 사이에 높은 확장성과 유연성을 갖는 확장 가능형 ECC 구조를 제안한다. 구조적 확장성을 위해 유한체 연산을 32 비트 워드 단위로 병렬 처리하는 처리요소의 1차원 배열을 기반으로 모듈러 연산회로를 구현하였으며, 사용되는 처리요소의 개수를 1~8개 범위에서 결정하여 회로를 합성할 수 있도록 설계되었다. 이를 위해 워드 기반 몽고메리 곱셈과 몽고메리 역원 연산의 확장 가능형 알고리듬을 적용하였다. 180-nm CMOS 공정으로 확장 가능형 ECC 프로세서 (sECCP)를 구현한 결과, N_PE=1인 경우에 100 kGE와 8.8 kbit의 RAM으로 구현되었고, N_PE=8인 경우에는 203 kGE와 12.8 kbit의 RAM으로 구현되었다. sECCP가 100 MHz 클록으로 동작하는 경우, N_PE=1인 경우와 N_PE=8인 경우의 P256R 타원곡선 상의 점 스칼라 곱셈을 각각 초당 110회, 610회 연산할 수 있는 것으로 분석되었다.

• 한국전자통신학회논문지
• /
• 제10권10호
• /
• pp.1093-1100
• /
• 2015

RSA 암호법의 안전성은, 덫 문으로 사용되는 큰 정수 N을 소인수분해하는 일이 매우 어렵다는 사실에 기반을 두고 있기 때문에, RSA 암호법을 이용하여 암호문을 전달할 때와 그 암호문을 공격할 때에는 합성수를 소인수분해하는 방법이 매우 중요한 문제이다. 100자리 이상의 큰 정수 N을 소인수분해하는 지금까지 알려진 가장 빠른 알고리즘은 일반 수체 체(General Number Field Sieve, GNFS) 알고리즘이지만, 현대의 공개키 암호법에서 자주 사용되는 20~25 자리의 수(64.~83 비트)정도의 소인수를 찾아내는 가장 빠른 알고리즘은 Lenstra의 타원곡선법이다. 그러나 Lenstra의 방법은 실행시간의 대부분을 $M{\cdot}P$ mod N을 계산하는 과정에서 소비하게 되었기 때문에, Montgomery와 Koyama는 $M{\cdot}P$ mod N을 고속으로 계산하는 방법을 제안하였다. 본 논문에서는 Montgomery와 Koyama의 방법을 분하여, 최적의 매개변수를 선택하고 곱셈횟수를 줄여서 구축한 효율적인 $M{\cdot}P$ mod N 계산 알고리즘을 제안한다. 분석결과, Montgomery와 Koyama의 알고리즘보다 제안한 알고리즘이 H/W에서의 구현시간을 약 20% 단축하였다.

• 한국농공학회지
• /
• 제44권6호
• /
• pp.106-114
• /
• 2002

In this study, the results of a series of consolidation test for undisturbed Ariake clay in Japan were analyzed by three methods, e-log p (e: void ratio, p: consolidation pressure), log e-log p and n-log p (n: porosity). Moreover, the characteristics of each analysis method were studied. For undisturbed Ariake clay, the log o-Log p and the n-log p relationships can be found as two groups of straight lines of different gradients, but both the elastic consolidation and plastic consolidation regions of e-log p relationship are expressed as a curve. In this paper, the porosity of consolidation yield n$\_$y/, consolidation yield stress p$\_$y/, and the gradient of the plastic consolidation region C$\_$p/ were represented by the log e-log p method, and n$\_$c/, P$\_$cn/ and C$\_$cn/ were represented by the n-log p method. The meaning and the relationships of each value were studied, and the interrelationships among compression indices i.e. C$\_$cn/, C$\_$p/ and C$\_$c/ are obtained from each analysis method as a function of initial porosity n$\_$0/.