• The Korean Journal of Physiology
• /
• v.27 no.1
• /
• pp.37-49
• /
• 1993

Ventilatory responses to inhaled $CO_2$ were measured during continuous negative pressure breathing (CNPB) in awake dogs. End expiratory lung volume (EELV) decreased linearly with pressure level during CNPB (correlation coefficient= 0.81, p<0.005) during air breathing. When CNPB was applied during 5% $CO_2$ inhalation, the decrease in EELV was not significantly different (p<0.5) from that during air breathing. As a result of a lowered EELV, tidal volume ($V_T$) significantly decreased by 22% and breathing frequency ($f_B$) increased by 68% in the steady state during air breathing (p<0.0001). These responses were similar during 5% $CO_2$ inhalation, thus the $CO_2$ response curve measured during CNPB shifted upward without a change in sensitivity (p>0.05). These results indicate additive effects of CNPB and $CO_2$ inhalation. The degree of hyperventilation during CNPB at eupnea was estimated to be 63% of that during control ventilation and was significantly greater than zero (p<0.0001), which suggests an alveolar hyperventilation due to CNPB. These results suggest that the mechanical alterations associated with n decrease in lung volume could play an important role in ventilatory control independently of chemical regulation of breathing. Thus, exercise hyperpnea, which is associated with a lowered functional residual capacity (FRC), may in part be explained by this mechanical stimulation of breathing.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.2
• /
• pp.116-121
• /
• 1999

This study was aimed to explain the essence of Hydroxylammonium hydrochloride(H.A.) effect on degummed silk fiber increasing the colour sites due to oxime generating reaction. H.A. in aqueous solution caues to increase the amount of [H+] and reduce pH values as the concentration of H.A. increases. The rate of [H+] absorption of silk fiker in acidic solution differs on the basic of solution pH and shows a specific uptake in each pH, the lower the pH of solution, the higher the amount [H+] absorption. The pH of solution after treating of silk fiber in H.A. and HCl, showed more remaining [H+] in H.A. solution due to [H+] releasing under the procedure of oxime production. Also it was revealed that in higher concentration of H.A. the reaction for oxime fixation in silk fiber carried out stonger and as a result the bigger gap with acid uptake curve appeared. FT-IR analysis of silk fiber treated with H.A. revealed the creating of intermolecular H-bond at the 2,981-2.930 cm-1, which was not appeared for nontraeted silk fibers and shows H-bond between N-OH group in oue chain and C=) group in another chain of silk protein. Colourimetry of dyed silk fiber after H.A. tratment showed that the silk fiber treated with the high concentration of H.A. compare to low concentration, absorbed more dyeing molecules and so Showed less percontage of Whiteness.

• Investigative Magnetic Resonance Imaging
• /
• v.25 no.3
• /
• pp.164-171
• /
• 2021

Purpose: Mild cognitive impairment (MCI) is a prodromal stage of Alzheimer's disease (AD). Brain atrophy in this disease spectrum begins in the medial temporal lobe structure, which can be recognized by magnetic resonance imaging. To overcome the unsatisfactory inter-observer reliability of visual evaluation, quantitative brain volumetry has been developed and widely investigated for the diagnosis of MCI and AD. The aim of this study was to assess the prediction accuracy of quantitative brain volumetry using a fully automated segmentation software package, NeuroQuant^®, for the diagnosis of MCI. Materials and Methods: A total of 418 subjects from the Korean Brain Aging Study for Early Diagnosis and Prediction of Alzheimer's Disease cohort were included in our study. Each participant was allocated to either a cognitively normal old group (n = 285) or an MCI group (n = 133). Brain volumetric data were obtained from T1-weighted images using the NeuroQuant software package. Logistic regression and receiver operating characteristic (ROC) curve analyses were performed to investigate relevant brain regions and their prediction accuracies. Results: Multivariate logistic regression analysis revealed that normative percentiles of the hippocampus (P < 0.001), amygdala (P = 0.003), frontal lobe (P = 0.049), medial parietal lobe (P = 0.023), and third ventricle (P = 0.012) were independent predictive factors for MCI. In ROC analysis, normative percentiles of the hippocampus and amygdala showed fair accuracies in the diagnosis of MCI (area under the curve: 0.739 and 0.727, respectively). Conclusion: Normative percentiles of the hippocampus and amygdala provided by the fully automated segmentation software could be used for screening MCI with a reasonable post-processing time. This information might help us interpret structural MRI in patients with cognitive impairment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.107-107
• /
• 1998

GaN 에피택시 층의 전기적, 광학적 특성 및 표면 형상의 향상을 위한 전처리 공 정으로서 사파이어 기판의 질화 처리가 많이 행해지고 있는데 이는 표면에 질화 충올 형성시킴으로서 GaN 충과의 계면에너지 및 격자상수 불일치를 줄여 GaN 충의 성장을 촉진시킬 수 있기 때문이다 본 실험에서는 고 진공 하에서 유도 결합 플라즈마를 이용하여 사파이어 기판의 질화 처리를 행한 후 XPS와 AFM을 이용하여 기판 표면의 질소 조성과 표면 형상을 관찰하였다. 기판 표면의 질소 조성은 질소 가스의 유입량과 기판의 온도보다 칠화 시 간 및 RF-power에 의해 크게 좌우되나 표면 형상은 기판의 온도에 크게 영향올 받는 것으로 나타났다. 따라서 본 실험에서는 기판의 온도를 낮춤으로서 protrusion이 없는 매끈한 표면의 질화 충을 얻올 수 있었다. 핵생성 충의 성장 없이 450 oC의 저온에서 GaN 충올 성장시킨 결과 육방 대청성 의 wurtzite구조를 가지며 bas허 plane이 사파이어 기판과 in-plane에서 300 회전된 관계 를 갖고 있는 것올 XRD -scan으로 관찰하였다. 또한 GaN 충의 성장이 진행됩에 따라 결정성이 향상되고 있는 것이 뼈S ali맹ed channeling 실험올 통해 관찰되었으며 이는 G GaN 충의 두께 중가에 따라 결정성이 향상된다는 것올 의미한다 사파이어 기판의 질 화 처 리 시 간이 증가함에 따라 후속 성 장된 GaN 층의 bas외 pI뻐e에 대 한 XRD -rocking c curve의 반치폭이 감소하는 것으로 나타났는데 이는 기판의 표면이 질화 충으로 전환 됨에 따라 각 GaN island의 c-축이 잘 정렬됨올 의미한다. 또한 AFM으로 ~이 충의 표 면 형상올 관찰한 결과 기판의 질화 처리가 선행될 경우 lateral 방향으로의 G뼈 충의 성장이 촉진되어 큰 islands로 성장이 일어나는 것으로 관찰되었는데 이는 질화 처리가 선행될 경우 Ga과 N의 표면 확산에 대한 활성화 에너지가 감소되기 때문인 것으로 생 각된다 일반적으로 GaN 에피택시 충의 결정성의 향상과 lateral 생장올 도모하기 위하여 성장 온도를 증가시키지만 본 실험에서는 낮은 성장 온도에서도 결정성의 향상 및 l later빼 성장을 촉진시킬 수 있었으며 이는 저온 성장법에 의한 고품위의 GaN 에피택시 충 성장에 대한 가능성올 제시하는 것이다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.937-942
• /
• 2009

The aim of this study was to analyze the effects on growth and muscle development during the growing period of the sex-linked dwarf gene in the background of a Taiwan Country chicken strain, L2, selected for egg production. Eight crossbred males, heterozygous for the DW*DW mutation, were each backcrossed to six females of the L2 strain to produce two genotypes of BC females, either normal (DW*N+/-) or dwarf (DW*DW/-). The experiment included 251 normal and 207 dwarf pullets. The effect of the dwarf gene on body weight and shank length was highly significant from 2 weeks of age. The reduction of body weight by the dwarf gene reached 34.8% and 37.4% as compared to normal sibs at 16 and 20 weeks of age, respectively. Parameters of the growth curve were estimated: the age at inflection (TI) was higher in normal pullets (66.9 days) than in dwarf pullets (61.2 days). A significant effect of the dwarf gene on single muscle fiber cross-section area was found from 12 weeks of age onwards, whereas the dwarf gene had no effect on the total number of muscle fibers. Comparing the effect of the dwarf gene on shank length at different ages revealed an earlier effect on skeleton growth, observed from 2 weeks of age, than on muscle development, which was affected from 8 to 12 weeks of age.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.2
• /
• pp.151-158
• /
• 2002

The hydorgen storage alloys were produced by melting in arc melting furnace and then solution heat treated at $1,100^{\circ}C$ followed by pulverization. The chemical analysis on the samples showed that the major elements of misch metal(Mm) were La, Ce, Pr and Nd with impurity less than 1wt.%. X-ray diffraction indicated that the structure for these samples were a single phase of hexagonal with $CaCu_5$ type. Compared to the initial particle size $100{\sim}110{\mu}m$, the many fine cracks were found and particle size decreased to $14{\mu}m$ for $MmNi_{4.5}Mn_{0.5}$ after hydriding/dehydring test run. To activate the sample the vessel filled with hydrogen storage alloys was first evacuated for for at $70^{\circ}C$ and then treated for 10.5hr under hydrogen pressure of 20atm for $MmNi_{4.5}Mn_{0.5}$ alloy. The experimental data showed that the hydrogen storage alloy of $MmNi_{4.5}Mn_{0.5}$ had superior adsorption and description properties within a temperature rang of $40^{\circ}C{\sim}80^{\circ}C$ and also they had a good P-C-T curve.

• Restorative Dentistry and Endodontics
• /
• v.45 no.3
• /
• pp.30.1-30.11
• /
• 2020

Objectives: This micro-computed tomographic (CT) study aimed to compare the shaping abilities of ProTaper Next (PTN), One Shape (OS), and One Curve (OC) files in 3-dimensionally (3D)-printed mandibular molars. Materials and Methods: In order to ensure standardization, 3D-printed mandibular molars with a consistent mesiobuccal canal curvature (45°) were used in the present study (n = 18). Specimens were instrumented with the OC, OS, or PTN files. The teeth were scanned pre- and post-instrumentation using micro-CT to detect changes of the canal volume and surface area, as well as to quantify transportation of the canals after instrumentation. Two-way analysis of variance was used for statistical comparisons. Results: No statistically significant differences were found between the OC and OS groups in the changes of the canal volume and surface area before and after instrumentation (p > 0.05). The OC files showed significantly less transportation than the OS or PTN systems for the apical section (p < 0.05). In a comparison of the systems, similar values were found at the coronal and middle levels, without any significant differences (p > 0.05). Conclusions: These 3 instrumentation systems showed similar shaping abilities, although the OC file achieved a lesser extent of transportation in the apical zone than the OS and PTN files. All 3 file systems were confirmed to be safe for use in mandibular mesial canals.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.2
• /
• pp.107-112
• /
• 1996

To clarify the mechanism of silica adsorption to soil, kinetic study using continuous stirred-flow method was conducted with the Luisiana soil at three pH levels (pH 5.0, 6.5, and 8.0). Silica adsorption increased continuously without showing the maximum adsorption for long enough experimental time. Kinetic curve of silica adsorption could be divided into two stage processes. The first stage process was fitted well to the following equation with highly significant correlation coefficient : $$R_{ad}=K_a*(Q_{OH}^S)^n$$ where, $R_{ad}$ is silica adsorption rate($Si\;{\mu}mal/min$). $Q_{OH}^S$ is the negative charge sites on the soil surface created by alkali titration, and $K_a$ and n are constants. The "n" value of the first stage process was 1.1. This value indicates that the silica adsorption is accomplished by the monodendate ligand bonding. The second stage process was fitted well to the following equation : $$R_{ad}=K_b*(pH)$$ where, $K_b$ is a constant. The equation indicates that the silica adsorption is not proportional to the $OH^-$ ion concentration. Rather, the increasing pattern of silica adsorption rate with the increase of $OH^-$ ion concentration would decrease exponentially.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1705-1713
• /
• 2010

The reliable fatigue life for hybrid composite joint structures was estimated by a statistical method for evaluating fatigue life; the results of the fatigue test varied widely. Cyclic bending tests were performed on a cantilever beam with a hybrid composite joint, which was developed for the body of a low-floor bus. In order to estimate the fatigue life of the hybrid composite joint structure by comparing the data obtained during the fatigue tests, the most suitable probabilistic density function among the normal, lognormal, and Weibull distributions was selected. The probabilistic-stress-life (P-S-N) curves calculated by using the selected Weibull distribution was suggested for process of statistical fatigue life estimation and reliability design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1119-1129
• /
• 2011

Shot-peening effects on the fatigue behavior of bearing steel were investigated under the high cyclic loading. Hourglass shape specimens were made of bearing steel(JIS-SUJ2) for rotary bending fatigue tests. Two kinds of treatments were performed : a heat treatment and a shot-peened surface treatment after the heat treatment. The fracture surfaces of specimens were classified into two types of fracture mode : the surface fracture mode induced by a surface defect and the internal fracture mode induced by a nonmetallic inclusion. Inclusion depth and shape affected considerably the fatigue life. Shot-peening treatment improved much the fatigue life of the bearing steel under low and high levels of cyclic loads. Probabilistic-stress-life (P-S-N) curves were suggested for the reliable fatigue life estimation of the improved bearing steel.