• Advances in concrete construction
• /
• 제10권6호
• /
• pp.509-514
• /
• 2020

In the preliminary design phase of explosion-proof structures, the use of P-I diagram is useful. Based on the fact that the deformation criteria at failure or heavy damage is significantly larger than the yield deformation, a closed form solution of normalized P-I diagram is proposed using the complete plastic resistance curve. When actual sizes and material properties of RC structural component are considered, the complete plasticity assumption shows only a maximum error of 6% in terms of strain energy, and a maximum difference of 9% of the amount of explosives in CWSD. Thru comparison with four field test results, the same damage pattern was predicted in all four specimens.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.408-409
• /
• 2007

Al-doped p-type ZnO films were fabricated on n-Si (100) and homo-buffer layers in pure oxygen at $450^{\circ}C$ by RF magnetron sputtering. Target was ZnO ceramic mixed with 2wt% $Al_2O_3$. XRD spectra show that the Al-doped ZnO thin films have ZnO crystal structure and homo-buffer layers are beneficial to Al-doped ZnO films to grow along c-axis. Hall Effect experiments with Van der Pauw configuration show that p-type carrier concentrations are ranged from $1.66{\times}10^{16}\;to\;4.04{\times}10^{18}cm^{-3}$, mobilities from 0.194 to $2.3cm^2V^{-1}s^{-1}$ and resistivities from 7.97 to $18.4{\Omega}cm$. P-type sample has density of $5.40cm^{-3}$ which is smaller than theoretically calculated value of $5.67cm^{-3}$. XPS spectra show that O1s has O-O and Zn-O structures and A12p has only Al-O structure. P-ZnO:Al/n-ZnO:Al junctions were fabricated by magnetron sputtering. V-I curves show that the p-n junctions have rectifying characteristics.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권6호
• /
• pp.890-894
• /
• 2002

The accuracy of the gamma function to describe lactation curve of Yankasa ewes was investigated using milk production data obtained from 168 ewes with either complete or incomplete 84 day lactation records. Ewes were daily hand milked after over-night separation from lamb and thorough disinfection of the udder. The daily milk yield on the average was estimated from the weekly total yield. The effect of type of birth, parity, season of birth and lactation length on the components of lactation curve (a, b, c and s) were analysed by least-square procedures. All factors except parity significantly (p<0.01) influenced the curve parameters. The goodness of fit of the function did not differ between the two classes of varying duration of lactation; incomplete lactation however, showed a lower persistency and as expected lower level of production. Correlations ($r_p$) between lamb weight gain and milk yield using the weight records from lamb weighed at weekly intervals indicated a high and positive relationship in the early lactation that decreased in intensity as the lactation advanced.

• Biomolecules & Therapeutics
• /
• 제7권4호
• /
• pp.342-346
• /
• 1999

This study was performed to investigate the effect of cyclosporine (CsA) on glucose tolerance and peripheral insulin sensitivity in normal Sprague-Dawley rats. After daily treament of CsA (10 mg/kg, i.p.) for two weeks, glucose tolerance tests were carried out by the treatment of glucose (Glu, 2 g/kg, i.p.) alone or in conjunction with exogenous insulin (Ins; human regular insulin, 5 U/kg, s.c.) and measured the decrement of area under the time-plasma glucose concentration curve ($AUC_{o\longrightarrow120}$; g.min/ml) by the trapezoidal rule. The rats were divided into three groups (Glu- (Control), Ins+Glu- and CsA+Ins+Glu-, n=7 in each group). The $AUC_{o\longrightarrow120}$ of the CsA+Ins+Glu-group was significantly (p<0.01) lower than that of Glu-group (61.0% of control) and significantly (p<0.05) higher than that of Ins+Glu-group (197.4% of Ins+Glu-). The CsA+Ins+Glu- grou showed higher levels of maximal blood glucose concentration and higher $AUC_{o\longrightarrow120}$ than those of Ins+Glu-group in normal rats. Besides direct pancreatic toxicity of CsA previously reported (Hahn et al., 1972), these results suggest that CsA also make the possibility to induce peripheral insulin insensitivity and glucose intolerance in normal rats.

• 동력기계공학회지
• /
• 제18권4호
• /
• pp.72-77
• /
• 2014

The aim of this study to investigate polarization characteristics of WC-based alloy coatings fabricated by high velocity oxygen fuel(HVOF) process. The coatings were fabricated by HVOF process with WC-CrC-Ni, WC-Co-Cr, WC-Co composite powders. Corrosion tests were carried out using potentiostat/galvanostat at solution with pH 2 and pH 6. Corrosion potential(Ecorr) and corrosion current density(Icorr) could be analyzed from polarization curve. WC-Co-Cr coating showed more incorrodible characteristics than other coatings at solution pH 2. WC-CrC-Ni coating was more favorable anti-corrosion characteristics than other coatings at solution with pH 6.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.59-68
• /
• 2009

분산진원으로서 연료전지 발전장치는 100w부터 수백[kw]의 용량을 가지며 종전의 대규모 전력설비와 비교하여 높은 신뢰도를 갖는 고품질의 전력을 공급할 수 있다. 본 연구에서는 소형 분산전원으로서 PEMFC(polymer electrolyte membrane fuel cell)연료전지 발전장치에 대한 PSIM(power electronics simulation tool) 모델을 설정하고 이를 바탕으로 DSP(digital signal processor)기반의 연료전지 하드웨어 시뮬레이터를 구현하였다. 연료전지 전류와 출력전압과의 관계는 연료전지의 전압-전류(V-I) 곡선 중 ohmic영역에서 1차 함수로 간략화 하였다. 구현된 시스템은 PEMFC 하드웨어 시뮬레이터, 절연형 풀 브리지 직류 부스트 컨버터 그리고 60[Hz] PWM인버터로 구성되어있다. 부하변동 및 과도상태에 대한 연료전지 하드웨어 시뮬레이터의 전압-전류-전력(V-I-P) 특성을 파악하였으며, 저항 부하 및 비선형 부하에 대한 전력변환기의 60[Hz] 정현파 교류출력 전압파형을 고찰하였다.

• 척추신경추나의학회지
• /
• 제1권2호
• /
• pp.93-100
• /
• 2006

Objectives: To invesgate correlation between the scoliotic curve and BMI, cervical lordosis, lumbar lordosis and Ferguson angle in spinal scoliotic patient. Methods: The study was composed of 14 scoliosis patients beyond cobb'a angle $10^{\circ}$ (sample I group) and 15 scoliosis patients over cobb'a angle $10^{\circ}$ (sample II group). The patients were evaluated with X-ray findings of full spine AP and lateral views and statistically analyzed. Results: 1. Sample II group showed a significant decrease in BMI as compared with Sample I group(P<0.05). 2. Scoliotic curve had s negative relationship with $BMI({\gamma}=0.406)$ 3. Scolotic patients had a lower cervical angle than normal man. Conclusion: 1. The larger the scoliotic angle, the lower BMI 2. There are no concemed scoliotic curve and cervical lordosis, lumbar lordosis and Ferguson angle.

• Tribology and Lubricants
• /
• 제38권3호
• /
• pp.84-92
• /
• 2022

In Part I, developed was a method to obtain the stress field due to an edge dislocation that locates in an elastic half plane beneath the contact edge of an elastically similar square wedge. Essential result was the corrective functions which incorporate a traction free condition of the free surfaces. In the sequel to Part I, features of the corrective functions, F_kij,(k = x, y;i,j = x,y) are investigated in this Part II at first. It is found that F_xxx(ŷ) = F_xyx(ŷ) where ŷ = y/η and η being the location of an edge dislocation on the y axis. When compared with the corrective functions derived for the case of an edge dislocation at x = ξ, analogy is found when the indices of y and x are exchanged with each other as can be readily expected. The corrective functions are curve fitted by using the scatter data generated using a numerical technique. The algebraic form for the curve fitting is designed as F_kij(ŷ) = $\frac{1}{\hat{y}^{1-{\lambda}}I+yp}$$\sum_{q=0}^{m}{\left}$$\left[A_q\left(\frac{\hat{y}}{1+\hat{y}} \right)^q \right]$ where λ_I=0.5445, the eigenvalue of the adhesive complete contact problem introduced in Part I. To investigate the exponent of F_kij, i.e.(1 - λ_I) and p, Log|F_kij|(ŷ)-Log|(ŷ)| is plotted and investigated. All the coefficients and powers in the algebraic form of the corrective functions are obtained using Mathematica. Method of analyzing a surface perpendicular crack emanated from the complete contact edge is explained as an application of the curve-fitted corrective functions.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.594-609
• /
• 1998

In this dissertation, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the seven indices, $C_p,\;C_{pk},\;C_{pm},\;C^{\ast}_{pm},\;C_{pmk},\;C_s,\;C_{psk}$ in terms of sensitivity to departure of the process median from the target value T=M from the most sensitive one up to the least sensitive are $C_{psk},\;C_{s},\;C_{pmk},\;C^{\ast}_{pm},\;C_{pm},\;C_{pk},\;C_p$. i.e, By the criteria adopted for evaluation of PCI's $C_{psk}$ is the most sensitive to the departure of the process median from target and $C_p$ is least

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1274-1280
• /
• 1997

The photodissociation dynamics of CH2I2 has been studied at 304 nm by state-selective photofragment translational spectroscopy. Velocity distributions, anisotropy parameters, and relative quantum yields are obtained for the ground I(2P3/2) and spin-orbit excited state I*(2P1/2) iodine atoms, which are produced from photodissociation of CH2I2 at this wavelength. These processes are found to occur via B1 ← A1 type electronic transitions. The quantum yield of I*(2P1/2) is determined to be 0.25, indicating that the formation of ground state iodine is clearly the favored dissociation channel in the 304 nm wavelength region. From the angular distribution of dissociation products, the anisotropy parameters are determined to be β(I)=0.4 for the I(2P3/2) and β(I*)=0.55 for the I*(2P1/2) which substantially differ from the limiting value of 1.13. The positive values of anisotropy parameter, however, show that the primary processes for I and I* formation channels proceed dominantly via a transition which is parallel to I-I axis. The above results are interpreted in terms of dual path formation of iodine atoms from two different excited states, i.e., a direct and an indirect dissociation via curve crossing between these states. The translational energy distributions of recoil fragments reveal that a large fraction of the available energy goes into the internal excitation of the CH2I photofragment; < Eint > /Eavl=0.80 and 0.82 for the I and I* formation channels, respectively. The quantitative analysis for the energy partitioning of available energy into the photofragments is used to compare the experimental results with the prediction of direct impulsive model for photodissociation dynamics.