• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.602-612
• /
• 2010

This study was conducted to investigate the state of hygiene education aimed for by bakers, and the evaluations of the importance and the performance concerning sanitary characteristics by the bakers. The questionnaires were administered to 186 bakers in Busan and the data evaluated by 5 scales method of Likert were statistically analyzed. 20.4% of bakers have not received hygiene education. Only 32.8% of bakers have experienced hygiene education regularly. The more the bakers were educated, the more they practiced the contents of hygiene education. The major reason of education unfulfilment was due to insufficient equipments and facilities. The scores of the hygienic performance of educated bakers were significantly (p<0.05) higher than those of uneducated bakers in food sanitation, especially for sanitary characteristics on inspection, pre-preparation and distribution. The mean scores of the importance and the performance evaluated by bakers were 4.05/5.00 and 3.76/5.00, respectively. The bakers assessed the highest scores on the importance and the performance of personal hygiene. The gap score was -0.30 between the importance and the performance for sanitary characteristics. The baker recognized that sanitary management was not performed as much as they recognized its importance. The importance and the performance grid of bakers revealed that the items of checking the certification for the origin of new food ingredient, inspecting deliveries as quickly as possible, separation between preparing and breading time, thawing frozen food under running tap water/in refrigerator, separating disposal gloves and utensils by the purpose, putting products in cleaned and sterilized utensils, letting consumes know the expiration date of products, preventing a rubber hose from being left on the kitchen floor, checking insect nets frequently and so on showed lower scores compared to the mean scores of the importance and the performance. The levels of the hygienic performance by bakers were positively correlated (p<0.01) with the recognitions of the importance on sanitary characteristics. These results might provide basic data for hygienic training and play a role on the improvement of the sanitary management in bakery.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1757-1765
• /
• 2014

The objective of this study was to explore hygiene issues by analyzing the importance and performance of personal and school hygiene in school foodservices. Questionnaires were administered to 634 students (10 high schools) in the Busan area. Exactly 29% of respondents had received hygiene education. The average score of importance of students' personal foodservice hygiene was 3.81/5.00, and the performance score was 3.48/5.00. The same scores for school foodservice hygiene were 4.37/5.00 and 3.67/5.00, respectively. Regarding importance and performance of personal foodservice hygiene, students who had received hygiene education showed significantly (P<0.01) higher scores than those without prior education. In terms of importance of school foodservice hygiene, students who had received hygiene education showed significantly higher scores for environment hygiene (P<0.05) and equipment hygiene (P<0.05). Additionally, among grid analysis in personal foodservice hygiene, the areas of high importance and low performance included 'washing hands before the meal', 'using a designated cup for the water purifier', and 'keeping clean around the leftover container'. As for school foodservice hygiene, the same area was 'cleanliness of tray'. These findings suggest that hygiene education needs to be extended to more students, and for school foodservice hygiene, a cleaner environment should be created using equipment hygiene management, including emphasis on ensuring cleanliness of tray.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.1153-1163
• /
• 2003

The purpose of this study was to evaluate the patients' satisfaction with the quality of hospital food service in Busan area. For the purpose, questionnaires were distributed to 271 hospitalized patients in 4 hospitals (three hospitals for self-operated foodservice, one for contracted foodservice) within 130 beds. The average scores were -0.99/5.00 for quality satisfaction of meal characteristics, -0.68/5.00 for service characteristics, and -0.37/5.00 for nutrition characteristics. The items of low scores in quality satisfaction were treatment of complaints, nutrition of meals, provision of nutritional information, the seasoning of the meals, selective menu, and sanitation of the meals. At the expectation and perception grid, high expectation and high perception items were cleanliness of employees' clothes, cleanliness of dish, employees' courtesy, exactness of meal time, and sanitation of the meals. High expectation and low perception items were treatment of complaints and nutrition. The patients with little appetite showed significantly (p<0.01) lower average scores in meal, service, and nutrition characteristics than those with much appetite. The self-operated foodservice operation had significantly (p<0.01) higher average scores in meal, service, and nutrition characteristics than those of the contracted foodservice operation. The patients hoped to improve the taste of cooked rice and side dish, quantity of the side dish, variety of menu, and sanitation of the meals.

• Journal of Embryo Transfer
• /
• v.18 no.1
• /
• pp.1-14
• /
• 2003

This study was conducted to investigate that the immature and mature oocytes of porcine can be cryopreserved by vitrification. Oocytes were centrifuged to polarize the cytoplasmic lipid droplets. The lipids were removed from cytoplasm by micromanipulation. Delipated oocytes were centrifuged after being preincubated with cytochalasin B(CB) fer 10 min, and lipid droplets were removed. Centrifuged oocytes were treated with CB and centrifuged to polorize lipid droplets but not delipated and control oocytes is not-treatment. Oocytes of three types were vitrified in electron microscope(EM) grids. The results of survival, maturation and cleavage rates were as follows. 1 The survival rates of immature oocytes were 15.1%, 0% and 0% in the Delipated, Centrifuged and Control after vitrification, respectively, and its rate of Delipated wassignificantly higher than Centrifuged and Control(P<.01). 2. The survival rates of mature oocytes were 12.21%, 0% and 0% in the Delipated, Centrifuged and Control after vitrification, respectively, and its rate of Delipated was significantly higher than Centrifuged and Control(P<.01). 3 The maturation rates of immature oocytes were 37.5% and 68.9% for metaphase II in the Delipated after vitrification and Non-vitrification, respectively, and its rate of Non-vitrification was significantly higher than Delipated after vitrification(P<.01). 4. The cleavage rates of immature oocytes were 12.5%, 0%, 0% and 56.1% in the Delipated, Centrifuged, Control after vitrification and Non-vitrification, respectively. It's rate of Delipated was higher than Centrifuged and Control, but there were no significant difference, and its rate of Non-vitrification was significantly higher than Delipated, Centrifuged and Control(P<.05). 5 The cleavage rates of mature oocytes were 25.0%, 0%, 0% and 67.9% in the Delipated, Centrifuged, Control after vitrification and Non-vitrification, respectively. It's rate of Delipated was higher than Centrifuged and Control, but there were no significant difference, and its rate of Non-vitrification was significantly higher than Delipated, Centrifuged and Control(P<.05).

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.27-33
• /
• 2008

With increasing use of portable appliances such as PDA and cellular phone, changing environment of applications requires higher solder joint reliability. The ENIG (Electroless Nickel Immersion Gold) process has been widely used for fine pitch SMT (Surface Mount Technology) and BGA (Ball Grid Array) packaged devices due to its benefits including excellent solderability, high uniformity and substantial legibility throughout the packaging process. Its brittle fracture of solder, however, has received increasingly attentions. It was Down that fracture brittleness is mainly related with black pad resulting from galvanic nickel corrosion and P-enriched layer formation between the IMC (Intermetallic Compounds) and electroless nickel layer. Theoretically, smooth electroless Ni layer was blown to have a advantages in minimizing the black pad phenomenon by uniform solution exchange during immersion gold plating. Nevertheless, how to control the surface morphology of electroless Ni layer has been hardly blown. This study investigates an effect of surface morphology of Cu underlayer on surface morphology of electroless Ni layer. To obtain various kinds of surface morphology of Cu layer, two types of Cu etching chemical and a number of Cu etching treatment were applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.302-309
• /
• 2017

The influence of the pile diameter, center to center pile spacing, internal friction angle of embankment soil, and height of embankment on the arching efficacy of the embankment pile was investigated. The arching efficacy, which was derived by the arch model developed in the embankment soil was calculated using two methods, one that considers crown failure of the arch and the other that considers load on the pile cap and critical relative spacing ratio for which the arching efficacy calculated by the two methods are the same. According to the computed results in this study, the arching efficacy calculated from a consideration of the load on pile cap governs when the relative spacing ratio becomes smaller and that calculated from the theory of crown failure governs when the relative spacing ratio becomes larger. The critical relative spacing ratio below which the arching efficacy calculated from a consideration of the load on pile cap governs the design decreases with increasing value, which is defined by the ratio of the pile diameter to the pile center to center spacing. Critical relative spacing ratios, which correspond to the values of 0.5 and 0.2 were 0.35 and 0.85, respectively. Considering the computed results, the critical relative spacing ratio decreases with increasing Rankine passive earth pressure coefficient and critical relative spacing ratios, which correspond to values of 5 and 2, were 0.23 and 0.85, respectively. The arching efficacy, which corresponds to the area ratio of 9%, was 54% and the one that corresponds to the value of 3 was 61%; the critical relative spacing ratios, which correspond to those arching efficacies, were greater than 0.5.

• Journal of the Korean earth science society
• /
• v.28 no.2
• /
• pp.202-213
• /
• 2007

The Odaesan earthquake $(M_L=4.8)$ occurred near Mt. Odae, Jinbu-Myon, Pyongchang-Gun, Kangwon Province on January 20, 2007. It has a shallow focal depth about 10 km. Its felt area covers most of the southern peninsula except some southern and western inland area. The maximum MM intensity was VI in the areas including Jinbu, Doam, Kangreung, Jumunjin, and Pyongchang. In these areas, there was a very strong shaking that caused several cracks on the walls of buildings and houses, slates falling off the roof, tiles being off the wall, things falling off the desk, and rock falling from the mountains. In order to get fault plane solutions, grid searches were performed by fitting distributions of P-wave first-motion polarities and SH/P amplitude ratios for each event. The results showed that the main shock represented right-lateral strike-slip sense and two aftershocks, reverse sense. It seems that the seismogenic fault may be the NNE-SSW trending Weoljeongsa fault near the epicenter based on the distribution of epicenters (foreshock, main shock, and aftershocks), damage area, and fault plane solution. The distribution of the epicenters indicates that the length of the subsurface rupture is estimated to be about 2 km.

• Geophysics and Geophysical Exploration
• /
• v.18 no.2
• /
• pp.64-73
• /
• 2015

Recently, hydraulic fracturing is used in various fields and microseismic monitoring is one of the best methods for judging where hydraulic fractures exist and how they are developing. When locating microseismic events using single vertical well data, distances from the vertical array and depths from the surface are generally decided using time differences between compressional (P) wave and shear (S) wave arrivals and azimuths are calculated using P wave hodogram analysis. However, in field data, it is sometimes hard to acquire P wave data which has smaller amplitude than S wave because microseismic data often have very low signal to noise (S/N) ratio. To overcome this problem, in this study, we developed a grid search algorithm which can find event location using all combinations of arrival times recorded at receivers. In addition, we introduced and analyzed the method which calculates azimuths using S wave. The tests of synthetic data show the inversion method using all combinations of arrival times and receivers can locate events without considering the origin time even using only single phase. In addition, the method can locate events with higher accuracy and has lower sensitivity on first arrival picking errors than conventional method. The method which calculates azimuths using S wave can provide reliable results when the dip between event and receiver is relatively small. However, this method shows the limitation when dip is greater than about $20^{\circ}$ in our model test.

• Journal of Oriental Neuropsychiatry
• /
• v.10 no.1
• /
• pp.17-38
• /
• 1999

The effects of Sahyangsohapwon on the affective reactivity of rats were studied with open-field behavior. Sample group was treated with the medicine for 8 weeks, whereas control group was treated with the vehicle. The effects of Sahyangsohapwon on the enhancement of learning and memory of AD model rats were studied with two-way avoidance task. Sample group electrically lesioned on nbM(nucleus basalis of Meynert) was treated with the medicine for 8 weeks, whereas control group with nbM lesion and sham group with the sham operation were treated with the vehicle. 1. In the open-field behavior task, the start latency from start box was measured $27.08{\pm}7.51sec$ in control group, $23.15{\pm}5.98sec$ in sample group. Rats in sample group showed a tendency of shortened latency going out to a strange place compared with those in control group, but with no statistical significance(p>0.05). 2. In the open-field behavior task, the number of locomotion crossing the grid lines was measured $84.54{\pm}3.55$ in control group, $116.93{\pm}6.41$ in sample group. There was an increased locomotion in sample group compared with control group with statistical significance(p<0.01). This can be interpreted as rats in sample group showed lowerd anxiety under a strange environment. 3. In the open-field behavior task, the rearing number was measured $7.46{\pm}0.57$ in control group, $10.13{\pm}0.95$ in sample group. There was an increased rearing in sample group compared with control group with statistical significance(p<0.05). This can also be interpreted as rats in sample group showed lowerd anxiety under a strange environment. 4. In the open-field behavior task, the number of crossing behavior was measured $5.54{\pm}1.50$ in control group, $9.20{\pm}1.67$ in sample group. There was a increasing tendency of crossing behavior in sample group compared with control group, but with no statistical significance(p<0.05). 5. In the open-field behavior task, the total activity was measured $97.54{\pm}4.70$ in control group, $136.27{\pm}792$ in sample group. There was an increased total activity in sample group compared with control group with statistical significance(p<0.01). This can also be interpreted as rats in sample group showed lowerd anxiety under a strange environment. 6. In the analysis of effects on the learning and memory in AD model rats with two-way avoidance task, the response latency was measured $6717{\pm}134msec$ in the 1st session, $5416{\pm}160msec$ in the 2nd session, $5252{\pm}148msec$ in the 3rd session in control group. It was measured $6724{\pm}155msec$ in the 1st session, $4642{\pm}139msec$ in the 2nd session, $4914{\pm}148msec$ in the 3rd session in sample group and $4357{\pm}144msec$ in the 1st session, $3125{\pm}115msec$ in the 2nd session, $3091{\pm}98msec$ in the 3rd session in sham group. There were differences between sham group and nbM lesioned groups with statistical significance in post hoc analysis(p<0.000). And in the 2nd session, there was a reduction of latency in sample group compared with control group with statistical significance (p<0.000). This showed that sample group had better learning capacity than control group. 7. In the analysis of effects on the learning and memory in AD model rats with two-way avoidance task, the number of avoidance response was measured $5.85{\pm}1.41$ in the 1st session, $14.23{\pm}2.89$ in the 2nd session, $15.69{\pm}2.56$ in the 3rd session in control group. It was measured $7.92{\pm}1.94$ in the 1st session, $16.83{\pm}2.29$ in the 2nd session, $15.42{\pm}2.81$ in the 3rd session in sample group and $14.38{\pm}1.62$ in the 1st session, $22.88{\pm}0.89$ in the 2nd session, $23.88{\pm}1.64$ in the 3rd session in sham group. There were differences between sham group and nbM lesioned groups with statistical significance in post hoc analysis(p<0.001). But between control and sample group, there was no significant difference. With the experimental results above, Sahyangsohapwon can be supposed to have the enhancing effects on the affect reactivity and learning with memory of AD model rats induced by electrolyte injury of nbM.

• Geomechanics and Engineering
• /
• v.15 no.5
• /
• pp.1101-1111
• /
• 2018

This study aims to present accurate soil modeling and validation of a single roadside guardrail post as well as a single concrete pile installed near cut slopes or compacted sloping embankment. The conventional Winkler's elastic spring model and p-y curve approach for horizontal ground cannot directly be applied to sloping ground where ultimate soil resistance is significantly dependent on ground inclination. In this study, both grid-based 3-D FE model and particle-based SPH (smoothed particle hydrodynamics) model available in LS-DYNA have been adopted to predict the static behavior of a laterally loaded guardrail post. The SPH model has potential to eliminate any artificial soil stiffness due to the deterioration of the node-connected Lagrangian soil mesh. For this purpose, this study comprises two parts. Firstly, only 3-D FE modeling has been tested to show the numerical validity for a single concrete pile in sloping ground using Mohr-Coulomb material. However, this material option cannot be implemented for SPH elements. Nevertheless, Mohr-Coulomb model has been used since this material model requires six input soil data that can be obtained from the comparative papers in literatures. Secondly, this work is extended to compute the lateral resistance of a guardrail post located near the slope using the hybrid approach that combines Lagrange FE elements and SPH elements by the suitable node-merging option provided by LS-DYNA. For this analysis, the FHWA soil material developed for application to road-base soils has been used and also allows the application of SPH element.