• 제목/요약/키워드: P-D value

검색결과 2,143건 처리시간 0.03초

Vermistabilization에 의한 음식물쓰레기 처리에 관한 기초연구 (A fundmental Study on Vermistavilization of Foodwaste)

  • 손희정;김형석
    • 환경위생공학
    • /
    • 제15권4호
    • /
    • pp.91-97
    • /
    • 2000
  • The objective of this study was to evaluate the possiblity of Foodwaste and co-treatment with other waste for vermistabilization. The value of oxidation-reduction potential(Eh) of the dewaterized foodwaste by a plant of subatmospheric evaporation was a possitive(+) value indicating, but the values of pH, salinity was idicating an unfavorable condition for earthworm life. The paper mill mixing waste properties by ripening for 20days were changed into the favorable range for earthworm. The growth of earthworms in foodwaste and mixing waste of paper mill 30% was found to be 68%, 84% for the survival rate, 227%, 275% for the liveweight increasing rate, respectively. The ingestion rate of foodwaste and mixing waste of paper mill 30% indicate 0.72g/g·d, 0.81g/g·d, respectively. About 62∼75% of ingestion amount produce cast and characteristics of cast indicate pH 6.1∼6.5 organic component 34∼42%, salinity 0.35∼0.4, CEC 73∼94 me/100g, N, P, K concentration 0.8∼1.2%, 0.4∼1.6%, 0.43∼0.5% respectively. Therefore it can be evaluated that the casts are good soil condition and organic fertilizer.

  • PDF

Kinetic Studies on the Reduction of 1-Benzyl-3-cyanoquinolinium Cations by Sodium Borohydride and the Applicability Marcus Theory

  • Han, In-Sook;Lee, Chang-Kiu;Han, In-Sup
    • Bulletin of the Korean Chemical Society
    • /
    • 제8권2호
    • /
    • pp.79-83
    • /
    • 1987
  • The reduction of a series of 1-substituted benzyl-3-cyanoquinolinium ions (p-$cH_3$, H, p-Br, m-F, p-CN) by sodium borohydride has been investigated. In all cases the products from these reactions were found to be 1, 2-dihydroquinolines over 82% yields. Rates of reduction were measured in basic condition and in solvent system consisting of 4 parts of isopropyl alcohol and 1 part of water by volume. Second order rate constants were obtained for these reactions. When the ratio of [$OH^-$] to [$BH_4^-$] becomes large the observed rate constants ($K_{obs}$) decrease by a small factor. Reaction scheme and rate law are discussed. Bronsted ${\alpha}(=\frac{d\;In\;k}{d\;In\;K})$ obtained by using the value of equilibrium constant K, which was obtained previously, was not 0. Instead, a value of 0.36 was obtained which indicated that the reduction by borohydride was structure-dependent according to the Marcus formalism even though the reaction rate was close to the diffusion limit.

중년 여성용 3D 프린팅 토르소 더미를 사용한 시판 바디쉐이퍼 제품의 의복압 분석 (Analysis of Clothing Pressure of Commercial Body Shapers using 3D Printed Torso Dummy for Middle-aged Women)

  • 도월희;이정은
    • 한국의류산업학회지
    • /
    • 제23권6호
    • /
    • pp.810-825
    • /
    • 2021
  • This study measured and analyzed clothing pressure at each measurement part of commercial body shapers to provide basic information for product design and clothing pressure standard and level. This study used five body shaper. Clothing pressure measurements were taken at 18points: Anterior area 8points, lateral area 5points, posterior area 5points. The findings of this study were as follows. As a result of measuring the clothing pressure, the body shaper 1 showed the highest pressure, and body shaper 5 showed the lowest pressure at almost of the measurement points of the three body types. In some cases, body shapers 2, 3, and 4 showed different orders of pressure depending on the measurement point. The highest measured values in most body shapers were the P1 shoulder area and the P2 bust area. The lowest measurement area differed by body type, but mainly P3 underbust area, P4 thorax area and P9 axillary area, P11 waist lateral area, P13 hip lateral area. These body shapers showed different results depending on the the manufacturers and body type of middle-aged women, and because there was no standard for the pressure value. Therefore, it is necessary to design a body shaper sizing system after accurately setting the clothing pressure value for each body part of the consumer.

한우 Exostosin-1 유전자의 SNP 탐색 및 경제형질 관련성 분석 (Association Study Between the Polymorphisms of Exostosin-1 Gene and Economic Traits in Hanwoo)

  • 김범수;김남국;이승환;조용민;허강녕;박응우;양부근;윤두학
    • Journal of Animal Science and Technology
    • /
    • 제53권1호
    • /
    • pp.7-13
    • /
    • 2011
  • 본 연구는 한우의 경제형질 관련 유전적 표지인자(DNA marker) 개발을 목적으로 EXT1 유전자의 다형성과 발현양상을 관찰하여 경제형질과의 관련성을 확인하고자 수행하였다. PCRdirect sequencing을 통하여 4개(T272196A, C272359T, G290964A 및 A302092G)의 SNPs를 탐색 하였으며, 탐색된 SNPs를 통하여 PCR-RFLP 기법으로 유전자형을 결정한 후 경제형질과 관련성을 분석하였다. 그 결과 T272196A 좌위에서 근내지방 육종가(p=0.014), G290964A 좌위에서 등지방두께 육종가 추정치(p=0.001), A302092G 좌위에서는 등지방두께 육종가(p < 0.001) 및 등심단면적 육종가(p=0.020)에서 각각 유의적인 연관성이 인정되었다. 따라서, 본 연구를 통해 확인된 SNP를 이용하여 한우의 선발에 활용 가능할 것으로 사료된다.

규폐증환자의 신기능 평가를 위한 요중 N-acetyl-$\beta$-D-glucosaminidase활성치 측정의 의의 (Assessment of Renal Function in Silicobis with Urinary N-acetyl-$\beta$-D-glucosaminidase Activity)

  • 이후락;김돈균;이수일;조병만;김화조
    • Journal of Preventive Medicine and Public Health
    • /
    • 제26권1호
    • /
    • pp.49-64
    • /
    • 1993
  • 규폐증의 신기능 장애 평가를 위한 기초 자료를 제공하기 위하여, 우리나라 일부 지역의 진폐요양기관에서 규폐증으로 치료중인 환자 58명을 실험군으로 하고 폐결핵으로 6 개월이상 치료중인 환자 40명을 결핵 대조군 그리고 일반사무직 근로자 51명을 건강대조군으로하여, 신기능 장애의 예민한 지표로 알려진 요중 N-ncetyl-$\beta$-D-glucosaminidase (NAG) 활성치를 측정하여 얻은 바를 아래와 같이 요약 한다. 1. 조사대상자 전체의 혈중 요소질소와 혈청 크레아티닌은 대상자 모두에서 참고치내에 있어 임상적으로 신장장애의 소견을 보이지 않았으나, 요중 NAG 활성치는 $7.25{\pm}7.31U/g\;creatinine$으로서 신기능 장애 선별기준 이상의 측정치를 보여 보다 민감한 검사 결과를 나타내었다. 2. 규폐증군의 요중 NAG 활성치는 $11.98{\pm}9.05U/g\;creatinine$으로서 결핵대조군($5.71{\pm}4.33U/g\;creatinine$) 및 건강대조군($3.63{\pm}1.67U/g\;creatinine$)에 비하여 통계학적으로 유의하게 증가되어 있었으나(p<0.05), 결핵대조군과 건강대조군에서는 유의한 차이를 나타내지 않았다(p>0.05). 3. 결핵대조군에서 결핵의 병증에 따라 요중 NAG 활성치가 증가되는 양상을 보였으나 통계학적으로 유의 하지않았고(p>0.05), 치료약제중 신장애 유발 항결핵제를 사용한 대상자에서 요중 NAG 활성치는 유의하게 증가되어 있었다(p<0.05). 4. 규폐증군에서 결절의 크기가 클수록 그리고 신장애 유발 항결핵제를 사용한 자 및 발병기간이 짧았던 자의 경우 요중 NAG 활성치가 증가되는 양상을 보였으나, 통계학적으로 유의한 차이는 아니었다(p>0.05). 5. 신독성 항결핵제 사용자를 제외한 요중 NAG 활성치는 건강대조군과 결핵대조군에서 각각 3.63U/g creatinine, 3.60U/g creatinine으로 차이를 보이지 않았으나, 규폐증군에서는 10.90U/g creatinine 으로 현저히 증가되어 있었다. 이상의 결과로 규폐증에서는 일반적인 건강진단 항목상의 신기능 검사에 이상소견을 보이지 않은 경우라도 신장기능의 변화가 동반될 수 있으며, 요중 NAG 활성치를 분진 폭로 근로자에게 적용하면 산업보건학적 측면에서 근로자의 건강관리를 위하여 매우 유익한 자료가 될 것으로 생각한다.

  • PDF

Predictive Value of Baseline Plasma D-dimers for Chemotherapy-induced Thrombocytopenia in Patients with Stage III Colon Cancer: A Pilot Study

  • Tanriverdi, Ozgur
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제14권1호
    • /
    • pp.293-297
    • /
    • 2013
  • Background: : Chemotherapy-induced thrombocytopenia (CIT) is an important cause of morbitity in patients with cancer. Aim: To investigate the effect of the baseline plasma D-dimer level, an important marker for thrombotic activity, on chemotherapy-induced thrombocytopenia in patients with stage III colon cancer. Materials and Methods: A total of 43 (28 men) eligible patients were divided into two groups according to whether they exhibited chemotherapy-induced thrombocytopenia: Group 1 (n=21) and Group 2 (n=22). Comparison was made using demographic, histopathologic, and laboratory variables. Additionally, baseline plasma D-dimer levels underwent receiver operation characteristics curve analysis, and areas under the curve were calculated. Sensitivity, specificity, and positive and negative likelihood rates were then determined. Results: The incidence of chemotherapy-induced thrombocytopenia had a significant correlation with baseline platelet count (r=0.568, P=0.031) and baseline plasma D-dimer levels (r=0.617, P=0.036). When the cut-off point for the latter was set as 498 ng/mL, the area under the curve was 0.89 (95%CI: 0.74-0.93), the sensitivity was 91.4%, the specificity was 89.7%, the positive likelihood rate was 3.64 and the negative likelihood rate was 0.24 for chemotherapy-induced thrombocytopenia diagnosis. Conclusions: The baseline level of plasma D-dimer could help to differentiate high-risk patients for chemotherapy-induced thrombocytopenia.

Making inferior alveolar nerve block more comfortable via computer-controlled local anesthetic delivery: A prospective clinical study

  • Gajendragadkar, Kunal;Bhate, Kalyani;Jagtap, Bhagyashree;Santhoshkumar, S.N;Kshirsagar, Kapil;Magoo, Surabhi
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제19권3호
    • /
    • pp.135-141
    • /
    • 2019
  • Background: The fear of needle insertion and pain during anesthesia is a source of patient dissatisfaction in dentistry. Inferior alveolar nerve block (IANB) remains the most common type of block and is in itself painful. Computer-controlled local anesthetic delivery (CCLAD) has been proven to reduce the pain associated with injection of anesthetics in various blocks. However, the efficacy of CCLAD for IANB in adults remains unknown. Methods: Sixty-four adult patients requiring bilateral IANB were selected and divided into two groups: group A (50 patients receiving IANB via CCLAD) and group B (50 patients receiving IANB using a conventional cartridge syringe). Pain perception and patient comfort were assessed using the visual analog scale and the 5-point semantic scale, respectively. Results: The pain perception was compared between the two groups using the Mann-Whitney U-test, and the P value was 0.003. The patient comfort was also compared using the same test, and the P value was 0.484. Conclusion: A significant difference was observed in the pain perception of the patients during CCLAD. The patient comfort was grossly equal for both techniques.

감쇠장치의 동적특성에 대한 고무의 종류, 경도 및 프리스트레스력의 영향 평가 (Impact Evaluation of Rubber Type, Hardness and Induced Prestress Force on the Dynamic Properties of a Damper)

  • 임채림;양근혁;문주현;원은비
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권6호
    • /
    • pp.167-174
    • /
    • 2022
  • 이 연구의 목적은 감쇠능력이 우수한 재료로 구성된 DUS(damping-up system)의 동적특성을 평가하고 일반 행어볼트와의 성능을 비교하는데에 있다. 주요변수는 고무의 종류 및 경도(𝜂H) 그리고 프리스트레스력(고무의 응력-변형률 관계에서 압축변형률(𝜂R)로부터 환산된 값)이다. 동적특성은 고유진동수(𝜔n), 최대 응답가속도(Am), 증폭계수(𝛼p), 최대 상대변위(𝚫m) 및 감쇠비(𝜉D)로부터 평가되었다. 실험결과 DUS의 Am, 𝛼p 및 𝚫m 는 일반 행어볼트 보다 각각 46.3%, 46.6% 및 62.9% 낮았으며, 𝜉D는 3.89배 높았다. 특히 DUS의 𝛼p 는 평균 1.3으로서 KDS 41 17 00의 강성요소에서 제시하는 값과 비슷한 반면, 일반 행어볼트의 𝛼p 는 2.45로 연성요소에서 제시하는 값과 비슷하였다. 결과적으로 DUS의 최적상세는 𝜂H가 50인 NR(natural rubber)과 45인 EPDM(ethylene propylene diene monomer)을 권장하며, 이들의 𝜂R는 5%로 추천한다.

토마토 주스의 미생물 발효 산도 특성에 관한 연구 (A Study on the pH Characterization for Microbial Fermentation in Tomato Juice)

  • Choi, S.M.;Supeno, D.;A., Okka;Chung, S.W.;Kim, H.S.;Kim, J.S.;Park, J.M.;Kwon, S.H.;Kwon, S.K.;Choi, Won Sik
    • 한국산업융합학회 논문집
    • /
    • 제17권3호
    • /
    • pp.170-177
    • /
    • 2014
  • This study was conducted to know the behavior of pH behavior in the tomato juices to find out an effective medium for microbial cultivation. Bacterial culture media is a material consist a mixture of nutrients used to grow microorganisms on or in it. In addition, microbial culture media can also be used for isolation, propagation, testing the nature physiological, and calculation of the number of microorganisms. Fresh tomato juice is used for basic ingredient, therein added salt, sugar and EM (Effective Microbial). The fermented solution placed in a room with a temperature of 40oC. Data retrieval before the pH value reached a constant value is done every 12 hours, after constant rate data collection was done every 24 hours. The pH value has been steady after 372 hours of fermentation process (15.5 days). From the results obtained that the amount of additional ingredient which added into tomato juice does not affect final pH value of solution. Thereby the most effective treatment for microbial cultivation media is treatment number four.

연약지반에 있어 N치에 의한 기초공법 대책연구 (On the Counter Plan of Foundation Method being based on N-Value in the Soft-Ground)

  • 이용희;이대명
    • 한국항만학회지
    • /
    • 제10권2호
    • /
    • pp.69-90
    • /
    • 1996
  • This study is related to save the bearing capacity from using Meyerhof formula namely, static mechanics formula with the S.P.T(N value) of the soft ground and is to choose the soft ground improvement method by the using of total load for the proper method of the pile foundation and then to design the most suitable pile foundation to fit the actual circumstance. The purpose of this study is calculating the diameter of the pile foundation by static mechanics formula and introducing the optimum design condition from the result of the bearing capacity for using N value of the S.P.T obtained from the deep soft ground about the piles such as P.H.C pile, pipe and cast-in-place pile of big diameter, etc. As above-mentioned, it is considered that the use of P.H.C pile or pipe pile is advisable on the synthetical investigation and that the selection of cast-in-place pile method is desirable in terms of the constructive safety and durability.

  • PDF