• Structural Engineering and Mechanics
• /
• 제2권1호
• /
• pp.95-112
• /
• 1994

This paper describes the formulation and application of a dynamic model for a conventional rail track subjected to arbitary loading functions that simulate wheel/rail impact forces. The rail track is idealized as a periodic elastically coupled beam system resting on a Winkler foundation. Modal parameters of the track structure are first obtained from the natural vibration characteristics of the beam system, which is discretized into a periodic assembly of a specially-constructed track element and a single beam element characterized by their exact dynamic stiffness matrices. An equivalent frequency-dependent spring coefficient representing the resilient, flexural and inertial characteristics of the rail support components is introduced to reduce the degrees of freedom of the track element. The forced vibration equations of motion of the track subjected to a series of loading functions are then formulated by using beam bending theories and are reduced to second order ordinary differential equations through the use of mode summation with non-proportional modal damping. Numerical examples for the dynamic responses of a typical track are presented, and the solutions resulting from different rail/tie beam theories are compared.

• The Journal of Advanced Prosthodontics
• /
• 제11권6호
• /
• pp.305-312
• /
• 2019

PURPOSE. The purpose of this study was to compare computer-aided design/computer-aided manufacturing (CAD/CAM) abutment and prefabricated abutment in Morse taper internal connection type implants after cyclic loading. MATERIALS AND METHODS. The study was conducted with internal type implants of two different manufacturers (Group Os, De). Fourteen assemblies were prepared for each manufacturer group and divided into 2 groups (n=7): prefabricated abutments (Os-P, De-P) and CAD/CAM abutments (Os-C, De-C). The amount of axial displacement and the removal torque values (RTVs) were measured before and after cyclic loading (10⁶ cycles, 3 Hz with 150 N), and the tensile removal force to dislodge the abutments was measured after cyclic loading. A repeated measures ANOVA and a pattern analysis based on the logarithmic regression model were conducted to evaluate the effect of cyclic loading on the axial displacement. The Wilcoxon signed-rank test and the Mann-Whitney test was conducted for comparison of RTV reduction% and tensile removal forces. RESULTS. There was no significant difference between CAD/CAM abutments and prefabricated abutments in axial displacement and tensile removal force; however, significantly greater RTV reduction% after cyclic loading was observed in CAD/CAM abutments. The correlation among the axial displacement, the RTV, and the tensile removal force was not significant. CONCLUSION. The use of CAD/CAM abutment did not significantly affect the amount of axial displacement and tensile removal force, but presented a significantly greater removal torque reduction% than prefabricated abutments. The connection stability due to the friction at the abutment-implant interface of CAD/CAM abutments may not be different from prefabricated abutment.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권5호
• /
• pp.347-351
• /
• 2001

A study was made on the extraction equilibria of succinic and formic acids from aqueous solutions using tri-n-octylamine (TOA) in 1-octanol. It was shown that the loading values of TOA decreased with increasing pH values. The apparent equilibrium constants for each acidamine complex were determined by an equilibrium model. In the case succinic acid, the formation of a bisuccinate anion played an important role in the stoichiometry of the acid-amine complex.

• 한국지반공학회지:지반
• /
• 제10권4호
• /
• pp.167-180
• /
• 1994

사전압밀된 포화점토의 응력이력이 2차압밀특성에 미치는 영향 및 Bjerrum모델이 과압밀점토의 2차압밀침하추정에 적용가능한지를 실험적으로 파악하기 위하여 재성형점토를 이용하여 재하-제하 및 재하-제하-재재하 응력이력의 조건에서 일련의 장기압밀시험을 실시하였다. 실험결과에 의하면 과압밀점토의 2차압밀침하는 전반부에서 응력이력의 영향을 받고 전반부의 2차압밀계수 Cn은 OCR(선행 압밀하중 Pcy재재하하중 Pr), 최대 OCR(선행압밀하중 Pcy제 하시의 하중 Pu)과,제하시간에 의존하며 과압밀비 증가에 따라 감소한다. 또한 2차압밀후반부 의 2차압밀계수 C.2는 OCR의 영향을 받으며 과압밀비 증가에 따라 감소한다. 최종적으로 실험 결과와 Bjerrum모델을 비교분석한 결과 임의 응력이력범위를 벗어나면 과압밀점토에서 Bjerrum모델의 적용은 가능하다.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.315-325
• /
• 2018

This paper predicts the flexural behaviour of reinforced concrete (RC) beams strengthened with a precast strip of ultra-high performance fiber-reinforced concrete (UHPFRC). In the first phase, ultimate load capacity of preloaded and strengthened RC beams by UHPFRC was predicted by using various analytical models available in the literature. RC beams were preloaded under static loading approximately to 70%, 80% and 90% of ultimate load of control beams. The models such as modified Kaar and sectional analysis predicted the ultimate load in close agreement to the corresponding experimental observations. In the second phase, the famous fatigue life models such as Papakonstantinou model and Ferrier model were employed to predict the number of cycles to failure and the corresponding deflection. The models were used to predict the life of the (i) strengthened RC beams after subjecting them to different pre-loadings (70%, 80% and 90% of ultimate load) under static loading and (ii) strengthened RC beams after subjecting them to different preloading cycles under fatigue loading. In both the cases precast UHPFRC strip of 10 mm thickness is attached on the tension face. It is found that both the models predicted the number of cycles to failure and the corresponding deflection very close to the experimental values. It can be concluded that the models are found to be robust and reliable for cement based strengthening systems also. Further, the Wang model which is based on Palmgren-Miner's rule is employed to predict the no. of cycles to failure and it is found that the predicted values are in very good agreement with the corresponding experimental observations.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.753-759
• /
• 2007

Statement of problem. In distal extension removable partial denture, the preservation of health of abutment teeth is very important, but abutment teeth are subjected to unfavorable stress under unilateral loading specially. Purpose. The purpose of this study was to investigate the biomechanical effects of mandibular removable partial dentures with various prosthetic designs under unilateral loading, using strain gauge analysis. Material and methods. Artificial teeth of both canines were anchored bilaterally in a mandibular edentulous model made of resin. Bilateral distal extension removable partial dentures with splinted and unsplinted abutments were fabricated. Group 1: Clasp-retained mandibular removable partial denture with unsplinted abutments Group 2: Clasp-retained mandibular removable partial denture with splinted abutments by 6-unit bridge. Group 3: Bar-retained mandibular removable partial denture Strain gauges were bonded on the labial plate of the mandibular resin model, approximately 2 mm dose to the abutments. Two unilateral vertical experimental loadings (30N and 100N) were applied subsequently via miniature load cell that were placed at mandibular left first molar region. Strain measurements were performed and simultaneously monitored from a computer connected to data acquisition system. For within-group evaluations, t-test was used to compare the strain values and for between-group comparisons, a one-way analysis of variance (ANOVA) was used and Tukey test was used as post hoc comparisons. Results. The strain values of group 1 and 2 were tensile under loadings. In contrast, strain values of group 3 were compressive in nature. Strain values increased as the applied load in increased from 30N to 100N (p<.05) except for right side in group 1. Under 30N loading, in left side, group 1 showed higher strain values than groups 2 and 3 in absolute quantity (p<.05). And group 2 showed higher strain values than group 1 (p<.05). In right side, group 1 and 2 showed higher strain values than group 3 in absolute quantity (p<.05). Under 100N loading in left side, group 1 showed higher strain values than groups 2 and 3 in absolute quantity (p<.05). And group 2 showed higher strain values than group 1 (p<.05). In right side, group 1 and 2 showed higher strain values than group 3 in absolute quantity (p<.05). Under 30N loading, group 2 and 3 showed higher strain values in right side than in left side. Under 100N loading, right side strain values were higher than left side ones for all groups. Conclusion. Splinting of two isolated abutments by bridge reduced the peri-abutment strain in comparison with unsplinted abutments under unilateral loading. Bar-retained removable partial denture showed the lowest strain of three groups, and compressive nature.

• 한국수자원학회논문집
• /
• 제45권11호
• /
• pp.1121-1130
• /
• 2012

낙동강 미래 기후변화 시나리오 추출을 위해 CGHR(T63) 모형과 A1B 온실가스 배출시나리오를 통계적 규모내림방법으로 대상유역의 규모로 축소 변환한 후, 수문 수질의 거동변화 등의 영향을 모의하기 위해 SS와 T-P를 대상으로 SWAT 모델을 적용하였다. 과거 30년 자료와 비교한 결과, 지표유출은 지역에 따라 최대 60%까지, 오염배출부하는 TSS와 T-P의 경우 각각 35~45%, 5~20%정도 변화되어, 미래 기후변화로 인한 지표유출과 오염부하 배출은 향후 뚜렷한 증가가 예상된다. 또한, 그 증가 경향은 낙동강 하류지역보다 상류지역에 크게 나타나며 계절별로는 겨울과 봄철의 증가가 크고 먼 미래로 갈수록 증가하는 반면, 여름과 가을철에는 먼 미래로 갈수록 증가율이 감소하는 경향을 나타내어 갈수기 지표수 수질에 부정적인 영향을 미칠 것으로 예측된다.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.155-174
• /
• 2016

A total of 104 laboratory model tests on a square footing subjected to eccentrically inclined loads supported by sand reinforced with randomly distributed polypropylene fibers were conducted in order to compare the results with those obtained from unreinforced sand and with each other. For conducting the model tests, uniform sand was compacted in a test box at one particular relative density of compaction. The effect of percentage of reinforcement used, thickness of the reinforced layer, angle of inclination of load to vertical and eccentricity of load applied on various prominent factors such as ultimate load, vertical settlement, horizontal deformation and tilt were investigated. An improvement in ultimate load, vertical settlement, horizontal deformation and tilt of foundation was observed with an increase in the percentage of fibers used and thickness of reinforced sand layer under different inclinations and eccentricities of load. A statistical model using non-linear regression analysis based on present experimental data for predicting the vertical settlement ($s_p$), horizontal deformation ($hd_p$) and tilt ($t_p$) of square footing on reinforced sand at any load applied was done where the dependent variable was predicted settlement ($s_p$), horizontal deformation ($hd_p$) and tilt ($t_p$) respectively.

• Geomechanics and Engineering
• /
• 제28권1호
• /
• pp.11-23
• /
• 2022

The response of pile foundations under lateral loads are usually analyzed using beam-on-nonlinear-Winkler-foundation (BNWF) model framework employing various forms of empirically derived p-y curves and p-multipliers. In practice, the p-y curve presented by the American Petroleum Institute (API) is most often utilized for piles in granular soils, although its shortcomings are recognized. The objective of this study is to evaluate the performance of the BNWF model and to quantify the error in the estimated pile response compared to a rigorous numerical model. BNWF analyses are performed using three sets of p-y curves to evaluate reliability of the procedure. The BNWF model outputs are compared with results of 3D nonlinear finite element (FE) analysis, which are validated via field load test measurements. The BNWF model using API p-y curve produces higher load-displacement curve and peak bending moment compared with the results of the FE model, because empirical p-y curve overestimates the stiffness and underestimates ultimate resistance up to a depth equivalent to four times the pile diameter. The BNWF model overestimates the peak bending moment by approximately 20-30% using both the API and Reese curves. The p-multipliers are revealed to be sensitive on the p-y curve used as input. These results highlight a need to develop updated p-y curves and p-multipliers for improved prediction of the pile response under lateral loading.

• 한국지반공학회논문집
• /
• 제34권5호
• /
• pp.53-63
• /
• 2018

무리말뚝의 내진설계를 수행할 때 지반-말뚝 동적상호작용을 고려하는 것이 중요하다. 특히, 동적하중을 받는 무리말뚝의 횡방향 저항력은 무리말뚝 효과에 의하여 단일말뚝과 비교하여 감소한다. 그러나, 지금까지 지진하중을 받는 무리말뚝의 동적 무리말뚝 효과를 제안한 연구는 매우 부족한 실정이다. 그러므로, 본 연구에서는 건조 모래지반에 설치된 $3{\times}3$ 무리말뚝에 대한 동적 원심모형실험을 수행하여 무리말뚝 효과를 산정하였다. 이 무리말뚝 효과는 동적 p-y 곡선에서 극한 횡방향 지반반력과 지반반력계수에 대한 보정계수(multiplier)를 적용하여 고려하였다. 그리고, 본 연구에서 얻어진 동적 p-y 곡선을 Beam on Nonlinear Winkler Foundation 모델을 이용한 비선형 동해석에 적용하여 그 적용성을 검증하였다. 그 결과, 본 연구에서 제안한 무리말뚝의 보정계수가 원심모형실험 결과를 잘 모사할 수 있는 것으로 나타났다.