• Journal of the Mineralogical Society of Korea
• /
• v.28 no.3
• /
• pp.245-253
• /
• 2015

The performance of $TiO_2$ photo-catalytic oxidation process is significantly dependent on the amount of hydroxyl radicals produced during the process, and it is an essential prerequisite to quantify its production. However, precise and accurate methods for quantification of hydroxyl radicals have not been developed so far. For this reason, this study was initiated to compare existing methods for analysis of hydroxyl radicals produced by $TiO_2$ photo-catalytic oxidation and to propose a new method to overcome the limitation of established methods. To simulate $TiO_2$ photo-catalytic oxidation process, Degussa P25 which has been widely used as a standard $TiO_2$ photo-catalyst was used with the dose of 0.05 g/L. The light source of process was UVC mercury low-pressure lamp (11 W, $2,975mW/cm^2$). The results indicate that both potassium iodide (KI)/UV-vis spectrometer and terephthalic acid (TPA)/fluorescence spectrometer methods could be applied to qualitatively measure hydroxyl radicals via detection of triiodide ion ($I_3{^-}$) and 2-hydroxyterephthalic acid which are produced by reactions of iodine ion ($I^-$) and TPA with hydroxyl radicals, respectively. However, it was possible to quantitatively measure hydroxyl radicals using TPA method coupled with high-performance liquid chromatograph (HPLC). The analytical results using TPA/HPLC method show that hydroxyl radical of 0.013 M was produced after 8 hours operation of photo-catalytic oxidation under specific experimental conditions of this study. The proposed method is expected to contribute to precise the evaluation of the performance of photo-catalytic oxidation process.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.1
• /
• pp.59-67
• /
• 2004

The Shihwa constructed wetland was established for the treatment of severely polluted water from Banwoul, Donghwa and Samhwa streams. This study was focused on investigating dynamics of phytoplankton communities in open waters and periphytic algae on reed (Phragmites communis) planting area at 5 stations from October 2001 to July 2002. The concentration of T-N and T-P of inlet stations from the streams were decreased by flowed through the wetland. However, the TN/TP ratios at all stations were shown as a little over 16 indicating that the T-P will play some role as a limitation factor. Phytoplankton communities were identified as a total 413 taxa which were composed of 375 species, 21 varieties, 2 forma and 15 unidentified species. Standing crops of phytoplankton communities and chlorophyll-a concentrations ranged from $330{\sim}36,420\;cells/mL$ and $2.5{\sim}170.7\;{\mu}g/L$ respectively, and showed the decreasing tendency after flowing through the wetland at almost all stations. Dominant species were 14 taxa at all stations which were Euglena oblonga and Synura spinosa etc. Periphytic algae on the reed were a total 329 taxa which were composed of 295 species, 13 varieties, 3 forma and 17 unidentified species. The species numbers were recorded in order of Chlorophyceae-Bascillariophyceae-Cyanophyceae-Euglenophyceae-Chrysophyceae. The relative abundance (%) was showed a seasonal variation from Cyanophyceae to Bascillariophyceae and to Chlorophyceae. Chlorophyll-a concentrations, ie. the biomass of periphytic algae were ranged from $5.5{\sim}363.8\;mg/m^2$. Dominant species were 16 taxa which were Lyngbya angusta of Cyanophyceae in the early investigation, and were changed to Stigeoclonium lubricum of Chlorophyceae, and Nitzschia plea of Bacillariophyceae etc. in the late. Species number, standing crops and chlorophyll-a concentrations of phytoplankton and perphytic algae were shown higher values at the inlet stations than the stations after flowing through the wetland.

• Asia pacific journal of information systems
• /
• v.17 no.2
• /
• pp.97-122
• /
• 2007

Conventional networking and telecommunications infrastructure characterized by wires, fixed location, and inflexibility is giving way to mobile technologies. Numerous research reports point to the ultimate domination of wireless communication. With the increasing prevalence of advanced cell-phones, various mobile data services (hereafter MDS) are gaining popularity. Although cellular networks were originally introduced for voice communications, statistics indicate that data services are replacing the matured voice service as the growth engine for telecom service providers. For example, SK Telecom, the Korea's largest mobile service provider, reported that 25.6% of revenue and 28.5% of profit came from MDS in 2006 and the share is growing. Statistics also indicate that, in 2006, the average revenue per user (ARPU) for voice didn't change but MDS grew seven percents from the previous year, further highlighting its growth potential. MDS is defined "as an assortment of digital data services that can be accessed using a mobile device over a wide geographic area." A variety of MDS have been deployed, with a few reaching the status of killer applications. Many of them need to access the Internet through the cellular-phone infrastructure. In the past, when the cellular network didn't have acceptable bandwidth for data services, SMS (short messaging service) dominated MDS. Now, Internet-ready, next-generation cell-phones are driving rich digital data services into the fabric of everyday life, These include news on various topics, Internet search, mapping and location-based information, mobile banking and gaming, downloading (i.e., screen savers), multimedia streaming, and various communication services (i.e., email, short messaging, messenger, and chaffing). The huge economic stake MDS has on its stakeholders warrants focused research to understand associated dynamics behind its adoption. Lyytinen and Yoo(2002) pointed out the limitation of traditional adoption models in explaining the rapid diffusion of innovations such as P2P or mobile services. Also, despite the increasing popularity of MDS, unexpected drop in its usage is observed among some people. Intrigued by these observations, an exploratory study was conducted to examine decision factors of MDS usage. Data analysis revealed that the increase and decrease of MDS use was influenced by different forces. The findings of the exploratory study triggered our confirmatory research effort to validate the uni-directionality of studied factors in affecting MDS usage. This differs from extant studies of IS/IT adoption that are largely grounded on the assumption of bi-directionality of explanatory variables in determining the level of dependent variables (i.e., user satisfaction, service usage). The research goal is, therefore, to examine if increase and decrease in the usage of MDS are explained by two separate groups of variables pertaining to information quality and system quality. For this, we investigate following research questions: (1) Does the information quality of MDS increase service usage?; (2) Does the system quality of MDS decrease service usage?; and (3) Does user motivation for subscribing MDS moderate the effect information and system quality have on service usage? The research questions and subsequent analysis are grounded on the two factor theory pioneered by Hertzberg et al(1959). To answer the research questions, in the first, an exploratory study based on 378 survey responses was conducted to learn about important decision factors of MDS usage. It revealed discrepancy between the influencing forces of usage increase and those of usage decrease. Based on the findings from the exploratory study and the two-factor theory, we postulated information quality as the motivator and system quality as the de-motivator (or hygiene) of MDS. Then, a confirmative study was undertaken on their respective role in encouraging and discouraging the usage of mobile data service.

• Korean Journal of Weed Science
• /
• v.16 no.1
• /
• pp.21-27
• /
• 1996

This experiment was conducted to find out an effective propagation method for reed(Phragmites communis Trin.), ensuring a continuous herbicide screening for reed control. Reed propagation methods were compared under a greenhouse condition using tour different materials; seeds, rhizomes, depressed stolons of P. japonica Steud., and stem cuttings. Although reed seeds were easy to harvest and store, their germination rate(${\leq}$5%) was very low and seedling growth from the seeds was slow. Rhizomes were difficult to harvest and their harvest time was limited from November to March. Furthermore, reed propagation using rhizomes had problems of a relatively low germination rate(46%), no uniformity in size and shape, individual differences at the early stage of growth, and difficulties in material storage. Rate of reed growth from rhizomes was higher in commercial soil mix(Boo Nong soil) than in sand or in sand+upland soil(1:1). Depressed stolons of P. japonica had a moderate germination rate(65%) and were relatively easy to harvest. However, their harvest time was limited only from August to September. Propagation method using stem cuttings had several advantages over the above methods using other materials. Reed plants could uniformly be propagated from the stem cuttings with a relatively high germination rate(75%). Stem cuttings of central nodes showed a higher germination rate compared to those of upper or lower nodes. Stem cuttings from the field should be used immediately after harvest, since their germination rate decreased rapidly when they were stored under a wet- or a dry-refrigerated condition. Furthermore, the germination of stem cuttings tended to decrease when they were collected from the field after August. This indicates that there is a limitation of harvest time for stem cuttings. However, a year-round propagation of reed using stem cuttings is possible if parent plants are grown in a greenhouse, and thus herbicide screening for reed control could continuously be performed.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.153-159
• /
• 2007

To investigate requirements for the process of credit bank system in life-long education institutions attached to colleges, this research was conducted with seniors at the departments of dental hygiene and dental laboratory technology, in the health line of the specific College from March 26 to April 15, 2007, followed by analysis using an SPSS/WIN 12.0 program, obtaining the following results. 1. 89.7% of the respondents had a plan to take a bachelor's degree and 56.1% of whom had such a plan for the purpose of personal development (p<0.05). 2. 73.5% of the respondents preferred the credit bank system in a lifelong education institution attached to a college to take a bachelor's degree. 3. 34.8% presented the greatest advantage of taking a bachelor's degree through the credit bank system that they could take a degree in a short period of time while 33.8% presented the most serious disadvantage that they might low social recognition. 4. As for requirements for the process of operating the credit bank system, 80.3% regarded required subjects for the major as appropriate basic ones. 79.9% regarded it as proper that filling more than 20 credits made it possible to take a degree. 5. As directions for improving the system, it was found that the students was thinking that strict academic record management is needed, and the degrees from the system must be recognized equally to those in regular colleges, social awareness in those degrees should be enhanced, and also credits assigned to cultural subjects should be reduced, and the limitation in the number of credits being able to be obtained in one center should be removed.

• Journal of Oral Medicine and Pain
• /
• v.31 no.4
• /
• pp.327-335
• /
• 2006

Generally, Tension-Type Headache(TTH) patients exhibit muscle pain, but can also have TMJ pain, which includes mouth opening limitation or joint sounds. The purpose of our study is to observe the clinical pain characteristics between TTH patients with muscle pain and TMJ pain. One hundred sixty-seven patients were diagnosed with TTH according to the questionnaires based on the International Headache Society's proposal on the diagnostic criteria of TTH. The patients were classified into three group; arthralgia group (18 patients), myalgia group (50 patients) and arthromyalgia group (99 patients). TTH patients with pericranial muscle pain were classified in the myalgia group. TTH patients with temporal region pain were classified in the arthralgia group. TTH patients with both types of pain were classified in the arthromyalgia group. The parameters in the diagnostic criteria such as quality, intensity, laterality of pain, and aggravation due to physical activities were compared among the three groups. 1. There were no significant differences in the quality of pain among the three groups. 2. There were no significant differences in the intensity of pain among the three groups. 3. There were no significant differences in the laterality of pain among the three groups. 4. A higher percentage of patients in the arthromyalgia group experienced headaches that were aggravated due to physical activity (p=0.03) compared to the other groups. The results of this study show that TTH patients with both arthralgia (TMJ pain) and myalgia (pericranial muscle pain) are more aggravated by physical activity than TTH patients with either one.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.191-198
• /
• 2009

Statement of problem: Ceramics have been important materials for the restoration of teeth. The demands of patients for tooth-colored restorations and the availability of various dental ceramics has driven the increased use of new types of dental ceramic materials. Improved physical properties of theses materials have expanded its use even in posterior crowns and fixed partial dentures. However, ceramic still has limitation such as low loading capability. This is critical for long-span bridge, because bridge is more subject to tensile force. Purpose: The wire reinforced ceramic was designed to increase the fracture resistance of ceramic restoration. The purpose of this study was to evaluate the fracture resistance of wire reinforced ceramic. Material and methods: Heat pressed ceramic(ingot No.200 : IPS Empress 2, Ivoclar Vivadent, Liechtenstein) and Ni-Cr wire(Alfa Aesar, Johnson Matthey Company, USA) of 0.41 mm diameter were used in this study. Five groups of twelve uniform sized ceramic specimens(width 4 mm, thickness 2 mm, length 15 mm) were fabricated. Each group had different wire arrangement. Wireless ceramic was used as control group. The experimental groups were divided according to wire number and position. One, two and three strands of wires were positioned on the longitudinal axis of specimen. In another experimental group, three strands of wires positioned on the longitudinal axis and five strands of wires positioned on the transverse axis. Three-point bending test was done with universal testing machine(Z020, Zwick, Germany) to compare the flexural modulus, flexural strength, strain at fracture and fracture toughness of each group. Fractured ceramic specimens were cross-sectioned with caborundum disc and grinded with sandpaper to observe interface between ceramic and Ni-Cr wire. The interface between ceramic and Ni-Cr wire was analyzed with scanning electron microscope(JSM-6360, JEOL, Japan) under platinum coating. Results: The results obtained were as follows: 1. The average and standard deviation in flexural modulus, flexural strength and fracture toughness showed no statistical differences between control and experimental groups. However, strain was significantly increased in wire inserted ceramics(P<.001). 2. Control group showed wedge fracture aspects across specimen, while experimental groups showed cracks across specimen. 3. Scanning electron microscopic image of cross-sectioned and longitudinally-sectioned specimens showed no gap at the interface between ceramic and Ni-Cr wire. Conclusion: The results of this study showed that wire inserted ceramics have a high strain characteristic. However, wire inserted ceramics was not enough to use at posterior area of mouth in relation to flexural modulus and flexural strength. Therefore, we need further studies.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.232-239
• /
• 2009

Statements of the problem: Many denture wearers occasionally use denture adhesives to improve denture retention, stability and chewing efficiency. An ideal denture adhesive is nontoxic, non-irritating, and provides comfort to the oral mucosa. Purpose: The purpose of this study was to evaluate the cytotoxicity and adhesive properties of a selected denture adhesive. Material and methods: To test cytotoxicity of the selected denture adhesive, mouse fibroblast cells were used in MTT testing. Cytotoxicity was examined according to the concentration of the denture adhesive and incubated for 1 to 4 days. To examine adhesive property, a denture base was fabricated on an edentulous dentiform. The adhesive was applied to the denture base, then tensile bond strength was measured, to evaluate the change in retention during 3 days. Results and Conclusion: 1. 1% and 2% concentration denture adhesive cream had no cytotoxicity. 2. The tensile bond strength of the group with both denture adhesive and artificial saliva was significantly higher than that of the group with only denture adhesive(P<.05). The tensile bond strength of the group with denture adhesive was significantly higher than that of with only artificial saliva(P<.05). 3. The tensile bond strength had no significant change during 1 hour, and then gradually decreased. After 1 day, it decrease to half. Within the limitation of this study, the tested denture adhesive had no cytotoxicilty and was effective in improving denture retention. The adhesive strength began to continuously decrease after 1 hour and it decreased to half at 1 day after application.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.337-349
• /
• 2008

Despite an improved bone reactions of Mg-incorporated implants in the animals, little yet has been carried out by the experimental investigations in functional loading conditions. This study investigated the clinical and histologic parameters of osseointegrated Mg-incorporated implants in delayed loading conditions. A total of 36 solid screw implants (diameter 3.75 mm, length 10mm) were placed in the mandibles of 6 beagle dogs. Test groups included 18 Mg-incorporated implants. Turned titanium Implants served as control. Gold crowns were inserted 3 months. Radiographic assessments and stabilitytests were performed at the time of fixture installation, $2^{nd}$ stage surgery, 1 and 3 months after loading. Histological observations and morphometrical measurements were also performed. Of 36 implants, 32 displayed no discernible mobility, corresponding to successful clinical function. There was no statistically significant difference between test implants and controls in marginal bone levels (p=0.413) and RFA values. The mean BIC % in the Mg-implants was $54.4{\pm}20.2%$. The mean BIC % in the turned implant was $48.9{\pm}8.0%$. These differences between the Mg-implant and control implant were not statistically significant (P=0.264). In the limitation of this study, bone-to-implant contact (BIC) and bone area of Mg-incorporated oxidized implant were similar to machine-turned implant. The stability analysis showed no significantly different ISQ values and marginal bone loss between two groups. Considering time-dependent bone responses of Mg-implant, it seems that Mg-implants enhanced bone responses in early loading conditions and osseointegrated similarly to cp Ti implants in delayed loading conditions. However, further investigations are necessary to obtain long-term bone response of the Mg-implant in human.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.4
• /
• pp.285-291
• /
• 2008

Purpose: Although automatic quantification software of myocardial perfusion SPECT provides highly objective and reproducible quantitative measurements, there is still some limitation in the direct use of quantitative measurements. In this study we derived parameters using normal variation of perfusion measurements, and tried to test the usefulness of these parameters. Materials and Methods: In order to calculate normal variation of perfusion measurements on myocardial perfusion SPECT, 55 patients (M:F = 28:27) of low-likelihood for coronary artery disease were enrolled and $^{201}TI$ rest/$^{99m}Tc$-MIBI stress SPECT studies were performed. Using 20-segment model, mean (m) and standard deviation (SD) of perfusion were calculated in each segment. As a myocardial viability assessment group, another 48 patients with known coronary artery disease, who underwent coronary artery bypass graft surgery (CABG) were enrolled. $^{201}TI$ rest/$^{99m}Tc$-MIBI stress / $^{201}TI$ 24-hr delayed SPECT was performed before CABG and SPECT was followed up 3 months after CABG. From the preoperative 24-hr delayed SPECT, $Q_{delay}$ (perfusion measurement), ${\Delta}_{delay}$ ($Q_{delay}$ - m) and $Z_{delay}$ (($Q_{delay}$ - m)/SD) were defined and diagnostic performances of them for myocardial viability were evaluated using area under curve (AUC) on receiver operating characteristic (ROC) curve analysis. Results: Segmental perfusion measurements showed considerable normal variations among segments. In men, the lowest segmental perfusion measurement was $51.8{\pm}6.5$ and the highest segmental perfusion was $87.0{\pm}5.9$, and they are $58.7{\pm}8.1$ and $87.3{\pm}6.0$, respectively in women. In the viability assessment $Q_{delay}$ showed AUC of 0.633, while those for ${\Delta}_{delay}$ and $Z_{delay}$ were 0.735 and 0.716, respectively. The AUCs of ${\Delta}_{delay}$ and $Z_{delay}$ were significantly higher than that of $Q_{delay}$ (p = 0.001 and 0.018, respectively). The diagnostic performance of ${\Delta}_{delay}$, which showed highest AUC, was 85% of sensitivity and 53% of specificity at the optimal cutoff of -24.7. Conclusion: On automatic quantification of myocardial perfusion SPECT, the normal variation of perfusion measurements were considerable among segments. In the viability assessment, the parameters considering normal variation showed better diagnostic performance than the direct perfusion measurement. This study suggests that consideration of normal variation is important in the analysis of measurements on quantitative myocardial perfusion SPECT.