• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.323-330
• /
• 2017

For the formation identification, surface geological survey, drill core analysis, core description and well log analysis are widely used. Among them well log analysis is a popular method with drill core analysis, since it measures continuously physical properties at in-situ. In this study we calculated Thomsen anisotropic parameters (${\varepsilon},\;{\delta},\;{\eta}$) after applying Backus averaging method to the P wave velocity, S wave velocity, and density logs. The well log data application of Blackfoot, Canada, shows the formation could be divided by 12 layers. This shows that Thomsen anisotropic parameters for identifying formation using anisotropic parameters is useful if there is no natural gamma log that is widely used for the formation identification.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.623-631
• /
• 2005

We applied the seismic method to investigate the site characteristics around the Circular Pond (top diameter 7.3 m, bottom diameter 3 m, and depth 4.78 m) at the Ssangsujung Park within the Gongsansung in Gongju. Previous excavations for the cultural assets beneath the Ssangsujung Park disclosed the assumed site of the Palace of the Beakje Dynasty and the Circular Pond containing the Bakje relics. We demonstrated that the seismic prospecting can be applicable to delineate the underground structure around the cultural properties by the three kinds of seismic approaches: walk-away test, conventional refraction method, and equal-distance refraction survey. The last method which is designed by this work ran detect the I-W variations of seismic velocity in the subsurface medium across the Circular Pond on the basis of the difference of the P-wave arrival times between the 1-m-spacing 24 geophones and the corresponding 24 shots parallel with the geophone profile. From the combined results, prominent three-layer velocity structure is observed around the Circular Pond. The bottom layer is interpreted as the basement rock which is exposed near the Ssangsujung whereas the upper layer with relatively lower velocities is interpreted to be the artificial covering. The basement depth beneath the Circular Pond is deeper than the norhern area. The western basement of Circular Pond has the thicker weaker layer compared with the eastern part. Thus, the middle layer could be constructed as the artificial foundation during the Beakje Dynasty. Consequently, the Kong-sansung Circular Pond is possibly built upwardly rather than digging.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.130-135
• /
• 1990

The title compound (C13H17NO2S) is monoclinic, space group P21/a, with a = 13.756 (3), b = 9.310(4), c = 21.305(3) $\AA$, $\beta$ = 95.0。, Z = 8, V = 2718.11 $\AA$3, Dc = 1.23$g·{\cdot}cm-3$, (Mo k$\alpha$) = 0.71069$\AA$,$\mu$ = 2.18 cm-1, F(000) = 1071.86, T = 298, R = 0.085 for 2935 unique observed reflections with I >2.0$\sigma$(I). The structure was solved by direct methods. The C-H bond lengths and the methyl groups are fixed and refined as their ideal geometry by allowing to ride on the parent atoms. Both molecules A and B have almost same structures except for two terminal ethyl groups. The ethylene-like skeleton including the nitro group in one molecule is nearly perpendicular to the plane of the methylbenzene group and two ethyl groups form a cis-type structure which has the dfferent orientations between two molecules; in the molecule A, two terminal methyl groups being the opposite directional arrangement against the plane of its skeleton, while in the B, with the same directional structure from its plane. The molecules in the crystal are packed together by non-bonded van der Waals forces.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.148-148
• /
• 2011

Riemann 문제는 천수방정식과 같은 쌍곡선형 방정식과 단일한 도약에 의해 불연속인 어떤 점의 좌 우에서 상수인 자료로 구성되는 초기치 문제로서 그 해법은 Godunov 방법과 같이 정확해에 의하면 정확 Riemann 해법, 근사 기법에 의하면 근사 Riemann 해법으로 불린다. 지금까지 이용되는 근사 Riemann 해법으로는 1981년에 P. L. Roe가 제안한 Roe의 선형화 기법과 1983년에 A. Harten, P. D. Lax, 그리고 B. van Leer가 제안한 HLL 기법의 수정 기법들이다. 최대 및 최소 파속만 고려하는 것으로 알려진 HLL 기법은 1988년에 B. Einfeldt의 제안에 의해 두 파속의 결정에서 Roe의 선형화 기법에 따른 고유치와 비교하는 것으로 수정되었다(HLLE 기법). 또한, 1994년에 E. F. Toro 등은 접촉파를 고려하기 위해 선형화된 지배방정식의 정확해로부터 중앙 파속을 고려하는 기법을 제안하였고, 이를 HLLC 기법으로 불렀다. 2002년에 T. Linde는 중앙 파속을 평가하기 위해 일반화된(수학적) 엔트로피 함수를 도입하였으며, van Leer는 이를 HLLL 기법으로 불렀다. 이 기법에서는 접촉파의 평가를 위해 보존변수에 대한 일반화된 엔트로피 함수로부터 중앙 파속이 유도되며, 이것과 특성 속도의 비교를 통해 최대 및 최소 파속이 결정된다. 따라서 이 기법에서는 모든 파속이 초기치로부터 결정되므로 HLLE 기법과 달리 Roe의 선형화 기법과 완전히 결별되고 HLLC 기법과 달리 정확해에 의존되지 않는 점에서 HLLL 기법은 모태인 HLL 기법의 온전한 계승으로 볼 수 있다. HLLL 기법은 여러 분야에 적용된 바 있으나, 수공학 분야에 적용된 사례는 알려진 바 없다. 이는 천수방정식에 대한 (물리적) 엔트로피 함수가 명확하지 않기 때문인 것으로 보인다. 이 연구에서는 보존변수로부터 정의되는 총 에너지를 일반화된 엔트로피 함수로 간주하여 모형을 구성하고, 정확해가 알려진 1차원 문제에 대해 적용성을 검토하였다. 정확해가 알려진 경우에 대해 모의한 결과, 1차 정도 수치해의 한계에도 불구하고, HLLL 기법의 결과는 대체로 정확해와 잘 일치하였으며 그 외의 HLL-형 기법의 그것에 비해 우수한 것으로 나타났다. 특히, 물이 빠져 바닥이 드러나는 상태에 대한 접촉 파속의 추정에서 Riemann 불변량을 이용하는 HLLC 기법에 비해 물이 빠지는 전선을 더 정확하게 포착하는 HLLL 기법의 결과는 매우 고무적이었다.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.478-481
• /
• 1985

Nucleophilic substitution reactions between Alkanesulfonylchlorides and p-substituted anilines in methanol-acetonitrile mixture have been studied kinetically. Reactivities of substrates, substituent effects of nucleophile and solvent effects indicate that the studied reaction proceeds via $S_N2$. The kinetic results show that transition state of the reaction between i-PSC and anilines becomes looser as the composition of methanol increases.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.127-134
• /
• 2001

본 논문에서는 국내 여러 지역에서 수행된 도로, 철도 및 기타 토목공사를 위한 설계과정에서 조사가 이루어진 현지조사와 시추코아 및 시추공을 대상으로 암반평가가 이루어진 자료들을 대상으로 암반분류방법간의 상관관계에 대해 조사하였다. 상관관계에 대한 해석은 암반분류에서 많이 사용되고 있는 RMR과 Q분류법간의 상관관계 그리고 RQD와 두 암반평가방법간의 관계에 대하여 암석성인별 분류 즉 화성암, 퇴적암 및 변성암별로 검토를 실시하였다. 전체적으로 분류방법의 상관관계는 좋게 나타나고 있다. 그리고 음파검층에 의한 탄성파 P파 속도와 RMR의 상관관계를 고찰하였는데, 이 두 요소간의 상관성은 비교적 양호하였으며 보다 신뢰성 있는 관계식을 유도하기 위한 노력이 필요하다.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.41-51
• /
• 2008

To construct in situ velocity-porosity relationships for oceanic basalt, considering crack features, P- and S-wave velocity measurements on basaltic samples obtained from the eastern flank of the Juan de Fuca Ridge were carried out under confining pressures up to 40 MPa. Assuming that the changes in velocities with confining pressures are originated by micro-crack closure, we estimated micro-crack aspect ratio spectra using the Kuster-$Toks{\ddot{o}}z$ theory. The result demonstrates that the normalised aspect ratio spectra of the different samples have similar characteristics. From the normalised aspect ratio spectrum, we then constructed theoretical velocity-porosity relationships by calculating an aspect ratio spectrum for each porosity. In addition, by considering micro-crack closure due to confining pressure, a velocity-porosity relationship as a function of confining pressure could be obtained. The theoretical relationships that take into account the aspect ratio spectra are consistent with the observed relationships for over 100 discrete samples measured at atmospheric pressure, and the commonly observed pressure dependent relationships for a wide porosity range. The agreement between the laboratory-derived data and theoretically estimated values demonstrates that the velocity-porosity relationships of the basaltic samples obtained from the eastern flank of the Juan de Fuca Ridge, and their pressure dependence, can be described by the crack features (i.e. normalised aspect ratio spectra) and crack closure.

• Analytical Science and Technology
• /
• v.10 no.2
• /
• pp.114-118
• /
• 1997

A stripping voltammetric scheme for the determination of osmium, based on the adsorptive accumulation of osmium in the presence of hydroxylamine, was described. Cyclic voltammetry was used to characterize the redox and interfacial processes. Optimal experimental conditions were found to be a stirred 0.05M hydroxylamine hydrochloride solution(pH 1.8), accumulation at -0.65V for 60s, and a differential pulse mode with a scan rate of 10mV/s. The detection limit was $6.3{\times}10^{-8}M$(12ppb) with the optimal condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3C
• /
• pp.228-236
• /
• 2006

A Multicarrier code division multiple access(MC-CDMA) is a scheme that combines multicarrier modulation with CDMA. It offers robustness to frequency selective fading effect and can support higher rate data transmission with higher spectral efficiency. The objective of this article is proposed and analyzed a new asynchronous MC-CDMA system with various kinds of data rates which employs a multiple access interference (MAI) canceller. The proposed multirate MC-CDMA system can be accomplished by changing the number of Parallel branch(P) according to their data rate and hybrid interference canceller(HIC) are used for MAI cancellation. We compare the performance of proposed system in terms of average bit error rate(BER) with that of a single rate MC-CDMA system. The results show the large improvement in performance that can be attained by the cancellation scheme under multipath environments.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.5-17
• /
• 2000

The physical and mechanical properties of the sedimentary rocks deposited in Taegu and Kyongbuk region have been measured in the laboratory and at the field. Four kinds of rocks such as the shale, the mudstone, the siltstone and the sandstone were the object of this study. In sedimentary rock joint, bedding made it impossible to extract cores for uniaxial compressive test. Some correlations between the uniaxial compressive strength and the other characteristic values such as Point load index, Schmidt hammer rebound, Brazilian strength, P-wave velocity and Absorption ratio are made. The chemical and mineral compositions are also investigated by the XRF and XRD analysis. In addition, the weathering grade of rocks are classified by the quantitative indices of Point load index, Schmidt hammer rebound and Absorption ratio.