• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.129-129
• /
• 2011

냉음극 변압기 전원 소스를 이용하여 저진공에서 플라즈마를 발생시키는 시스템을 개발하였다. 또한 이 장치를 이용하여 도핑된 산화막 증착 기술을 연구하였다. 이 때 도핑 전구체는 액체 소스였으며 이를 기화시켜 사용하였다. 특히 p 타입이 도핑된 이산화규소 박막 증착을 상온에서 실시하였다. 공정 압력은 400~1,000 mT였으며, 전압은 약 1,100~2,100 V 범위에서 조절하였다. 증착된 박막은 박막 두께와 홀 측정을 실시하였다. 홀 측정을 위한 인듐 금속 접합을 400 C에서 실시하였다. 결과를 요약하면, 플라즈마 공정 압력이 400에서 1,000 mTorr로 증가함에 따라 박막 증착 속도는 약 240~440 ${\AA}$/min이었다. 또한 증착된 p-SiO2의 벌크 농도는 같은 압력 증가에 따라 약 $1.2{\times}10^{19}$에서 $6.5{\times}10^{18}/cm^3$으로 절반 정도 감소하였다. 그에 따라 도핑된 산화막의 비저항은 $~1.4{\times}10^{-3}$에서 $2.5{\times}10^{-3}{\Omega}{\cdot}cm$로 증가하였다. 홀 이동도는 약 380~400 $cm^2/V{\cdot}s$를 유지하였다. 또한 전압이 1,100 에서 2,100 V로 증가함에 따라 산화막의 증착 속도는 약 330에서 410 ${\AA}$/min으로 증가하였다. 그러나 전압이 증가해도 벌크 농도는 약 8,9~$6.6{\times}10^{18}/cm^3$의 범위였다. 보다 자세한 결과는 발표를 통해 설명할 것이다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.4
• /
• pp.613-623
• /
• 2022

This study developed a functional prototype jacket designed to reduce loads on the upper extremities of workers performing repetitive motions in the same posture for extended periods of time. Dynamic taping lines were applied to the upper extremities, and three dimensional (3D) supporters were inserted in the abdomen and back waist areas corresponding to the core muscles. Clothing pressure on the upper-extremity dynamic taping lines was set to two levels (proto P1 and proto P2), and the 3D supporters were designed in three types (proto FW, proto FW/BW, proto FW/BW/BBX). According to the subjective pressure perceived on each part of the upper extremities, the level proto P1 pressure was preferred. The proto FW/BW/BBX 3D supporter was rated as excellent, and the perceived pressure was ranked as satisfactory. The prototype jacket performed upper-extremity load reduction when the upper-extremity clothing-pressure level was set to 1.8 kPa, 2.1 kPa, and 2.4 kPa on the upper arm, forearm, and wrist regions, respectively, and when 3D supporters were installed in the abdomen and back of the waist with the addition of a back band.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.399.1-399.1
• /
• 2016

p-type 반도체 물질로 알려진 $Cu_2O$에 Li 이온을 doping하면 Cu 이온 자리에 Li이온이 치환되어 p-type의 특성이 더욱 강하게 나타내는 것으로 알려져 있다. 이에 본 연구에서는 RF magnetron sputtering방법으로 성막한 p-type형 $Li:Cu_2O$박막의 특성을 연구하고 이를 $Li:Cu_2O-ZnO$ pn 접합 유연 나노제너레이터에 적용하였다. $Li:Cu_2O$ 성막시 $O_2$ 분압을 변수로 100nm 두께의 $Li:Cu_2O$ 박막을 성막하여 전기적, 광학적, 구조적, 표면 특성을 분석하였다. Hall measurement 측정 결과 $Li:Cu_2O$ 박막은 정공을 Major Carrier로 갖는 p-type 반도체임을 확인하였고, $O_2$의 분압이 증가할수록 Mobility 및 Carrier Concentration이 증가함을 확인하였다. 최적조건에서 광학적 투과도는 약 45%를 보였으며, 투과도를 통해 계산한 band gap은 약 2.03eV로써 일반적인 산화물 반도체의 작은 밴드갭을 가지고 있음을 알 수 있었다. 또한 Ellipsometer분석을 통해 $Ar:O_2$ 비가 $Li:Cu_2O$ 굴절률 및 흡광도에 미치는 영향을 연구하였으며, FE-SEM(Field Emission Scanning Electron Microscope)을 통해 표면을 분석하였다. 또한 XRD(X-ray diffractometer), TEM(Transmission Electron Microscope) 분석을 통하여 상온에서 성막한 $Li:Cu_2O$ 박막의 미세구조를 연구하였다. UPS(Ultraviolet Photoelectron Spectroscopy) 분석을 통해 일함수를 측정하였다. 이렇게 제작된 p 타입 $Li:Cu_2O$ 박막을 이용하여 $Li:Cu_2O-ZnO$ pn 접합을 구현하고 이를 이용해 유연 나노제너레이터를 제작하였다. 다양한 특성 분석을 통해p-type을 이용한 산화물 박막 기반 유연 나노 제너레이터 특성 향상 메커니즘을 제시하였다.

• Journal of Intelligence and Information Systems
• /
• v.15 no.1
• /
• pp.31-50
• /
• 2009

As the collected information which is static or dynamic is infinite in ubiquitous computing environments, information overload and invasion of privacy have been pressing issues in the recommendation service. In this study, we propose a recommendation service procedure through P2P, The P2P helps customer to obtain effective and secure product information because of communication among customers who have the similar preference about the products without connection to server. To evaluate the performance of the proposed recommendation service, we utilized real transaction and product data of the Korean mobile company which service character images. We developed a prototype recommender system and demonstrated that the proposed recommendation service makes an effect on recommending product in the ubiquitous environments. We expect that the information overload and invasion of privacy will be solved by the proposed recommendation procedure in ubiquitous environment.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.1 s.60
• /
• pp.7-10
• /
• 2007

The interaction between polymers and surfactants was investigated by means of rheological and surface tension measurements. The polymers used in this study were acrylates/$C_{10-30}$ alkyl acrylate crosspolymer (AC) and ammonium acryloyldimethyltaurate/VP copolymer (AV). And the surfactants were PEG-40 hydrogenated castor oil (HC) and polysorbate 60 (P60). HC and P60 made the micelles intervening between AC polymers, resulting in the increase of viscosity. However, HC showed a similar behavior over the wider range of surfactant concentration than P60. Regarding of surface tensions in the same range of surfactant concentration, AC/HC solution showed the area of increasing surface tension with surfactant concentration in contrast to the AC/P60 solution showing no increasing area. It is assumed that the micelles between AC/HC were formed so cooperatively and strongly that the surfactants located at the surface originally moved to the micelles.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.5
• /
• pp.643-648
• /
• 2005

In order to supply services necessary for users intelligently in the ubiquitous computing, effective filtering of context information is necessary. But studies of context information filtering have not been made much yet. In order for filtering of context information, we can use collaborative filtering being used much at electric commerce, etc. In order to use such collaborative filtering method in the filtering of ubiquitous computing environment, we must solve such problems as first rater problem, sparsity problem, stored data problem and etc. In this study, in order to solve such problems, the researcher proposes the collaborative filtering method using types of context information. And as the result of applying this filtering method to MAUCA, the P2P mobile agent system, the researcher could confirm the average result of 7.7% in the aspect of service supporting function.

• Korean Journal of Oriental Medicine
• /
• v.17 no.3
• /
• pp.77-85
• /
• 2011

Objectives : The purpose of this study was to develop a simulator which can analyze the anti-inflammatory effects of medical herbs based on e-cell concerning p38 MAPK signal pathway. Methods : We collected data concerning medical herbs with anti-inflammatory effects and the active compounds to provide as a fundamental databse and to validate the newly developed algorithm. At this time, we used the target database as pubmed and gathered the data by data mining tool, pathway studio. Also we have developed the web-based search system for confirming database related to anti-inflammation. We researched the mechanism of actions of proteins in p38 MAPK signal pathway when active compound has been inserted into the network. We reduced total network into TAK-MKK3-p38 and made the two types of mathematical model about active compounds' interaction. Results & Conclusion : We constructed the database which have 69 cases of medical herbs, 71 cases of active compounds, about 8,000 cases of URL(Uniform Resource Locator) related to papers and reports. We designed the ordinary differential equations for response of TAK, MKK3, p38 in e-cell's cytosol and nucleus. We used this formular as measure whether an active compound of medicinal plants which is inputted by an user would have an anti-inflammation effects. We developed the visualization program which could show the change of concentration over time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12B
• /
• pp.779-789
• /
• 2007

This paper presents an architecture of UPnP Bridge for interconnecting Non-lP devices with heterogeneous network interfaces to UPnP devices on UPnP networks. The proposed UPnP Bridge provides a Virtual UPnP device that performs generic UPnP Device's functionalities on behalf of Non-lP device. This paper defines 3 types of descriptions, Device Description, Message Field Description, and Extended UPnP Service Description in order to reduce the amount of effort required to connect a non-lP device with a new interface or message format to UPnP network. By these three types of descriptions and Message conversion module, developers for Non-lP devices can easily connect the devices to UPnP network without additional programming. So UPnP control point controls Non-lP devices as generic UPnP device. Some experiments validate the proposed architecture, which are performed on a test bed consisting of UPnP network the proposed bridge, and non-lP devices with CAN and RS232 interfaces.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.1
• /
• pp.74-83
• /
• 2020

A number of so-called 'Type IV' cracking was reported to occur at the welded joints of the P91 steel or P92 steel reheat steam piping systems in Korean supercritical thermal power plants. The reheat steam piping systems are subjected to severe thermal and pressure loading conditions of coolant higher than 570℃ and 4MPa, respectively. In this study, piping analyses and design evaluations were conducted for the piping system of a specific thermal plant in Korea and suggestions were made how structural integrity could be improved so that type IV cracks at the welded joints could be prevented. Integrity evaluations were conducted as per ASME B31.1 code with implicit consideration of creep effects which was used in original design of the piping system and as per nuclear-grade RCC-MRx code with explicit consideration of creep effects. Comparisons were made between the evaluation results from the two design rules. Another approach with modification or reduction of the redundant supports in the piping systems was investigated as a tool to mitigate thermal stresses which should essentially contribute to prevention of Type IV cracking without major modification of the existing piping systems. In addition, a post weld heat treatment method and repair weld method which could improve integrity of the welded joint of P91 steel were investigated.

• Korean Journal of Materials Research
• /
• v.25 no.1
• /
• pp.16-20
• /
• 2015

In this study, in order to improve the efficiency of n-type monocrystalline solar cells with an Alu-cell structure, we investigate the effect of the amount of Al paste in thin n-type monocrystalline wafers with thicknesses of $120{\mu}m$, $130{\mu}m$, $140{\mu}m$. Formation of the Al doped $p^+$ layer and wafer bowing occurred from the formation process of the Al back electrode was analyzed. Changing the amount of Al paste increased the thickness of the Al doped $p^+$ layer, and sheet resistivity decreased; however, wafer bowing increased due to the thermal expansion coefficient between the Al paste and the c-Si wafer. With the application of $5.34mg/cm^2$ of Al paste, wafer bowing in a thickness of $140{\mu}m$ reached a maximum of 2.9 mm and wafer bowing in a thickness of $120{\mu}m$ reached a maximum of 4 mm. The study's results suggest that when considering uniformity and thickness of an Al doped $p^+$ layer, sheet resistivity, and wafer bowing, the appropriate amount of Al paste for formation of the Al back electrode is $4.72mg/cm^2$ in a wafer with a thickness of $120{\mu}m$.