• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12B
• /
• pp.758-766
• /
• 2007

IStreaming services with a client-server architecture have scalability problem because a server cannot accomodate clients more than its processing capability. This paper introduces a case study for implementing H.264 streaming system based on P2P architecture in order to provide scalable and stable broadcast streaming services over the internet. The prototype system called OmniCast264 consists of the H.264 encoding server, the streaming server, the proxy server, and peer nodes. The proxy server dynamically manages placement of the peer nodes on the P2P network. Omnicast264 has the concepts of distributed streaming loads, real-time playback, error-robustness and modularity. Thus, it can provide large-scale broadcast streaming services. Finally, we have built P2P streaming systems with 12 PCs connected serially or in parallel. The experiment shows that OmniCast264 can provide real-time playback.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.253-261
• /
• 2006

In spite of the popularity of P2P technology, a multimedia streaming using the P2P technology has been neglected. The reason for this is that the P2P multimedia streaming has suffered from several inherent problems especially poor bandwidth and unreliable connection among peers. We suggest a Multi-Peer Binding Protocol (MPBP) in this paper that provides a virtual single channel composed of multiple connections to several peers to ease these problems. The protocol enables applications to download data from multiple peers simultaneously, so they can achieve throughput improvement and reliable streaming. For this, the MPBP splits media files into small chunks and provides a mechanism for identifying and transmitting each chunk. Implemented MPBP engine focuses on handling an abrupt disconnection from data sending peers and the evaluation result shows the MPBP is able to handle it gracefully. The MPBP is also desisted to support various media types. To verify this, video and audio applications are implemented using the MPBP engine in this paper.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.139-140
• /
• 2017

본 논문에서는, 원통형셀의 직렬조합에 의한 직렬배터리팩 구성(16S1P) 시, 배터리팩의 외형(정사면체;$4{\times}4$/직사면체;$2{\times}8$)차이에 의한 내부 열분포의 기초해석을 Comsol 프로그램을 통해 실시하였다. 동일한 전류프로파일을 적용하였을 때, 각 배터리팩 내부의 셀 간 열분포 및 외형의 차이에 의한 두 배터리팩의 열분포 비교 분석을 실시하였다. 기초해석 논문이므로, 실제 산업계에서 사용되는 원통형셀의 실험조건 대신에 Comsol 프로그램에서 제공하는 18650 타입의 원통형셀의 음극(anode)와 양극(cathode)의 시뮬레이션 조건을 적용하였다.

• Journal of Korean society of Dental Hygiene
• /
• v.21 no.5
• /
• pp.507-515
• /
• 2021

Objectives: The aim of this study was to evaluate the extent of the potential erosion of enamel induced by three different types of commercial fermented milk using the pH cycle model. Methods: Specimens were treated and soaked up in three types of fermented milk and in mineral water for 10 min, four times a day for 8 days, and all of the specimens were immersed in artificial saliva outside of treatment times. The microhardness of the surface was measured by a microhardness tester, and a scanning electron microscope (SEM) was used to identify the enamel surface morphology. Results: The differences in the surface microhardness (ΔVHN) of enamel were different among the groups (p<0.05). The four groups were in descending order of ΔVHN: the liquid type group, condensed-drink type group, condensed-stirred type group, and control group. The liquid type group had a higher ΔVHN than the other two fermented milk groups (p<0.05). Based on SEM observation, the most severe surface damage was due to the liquid type of fermented milk. Conclusions: Customers' careful discretion is advised when purchasing these types of fermented milk. This information is anticipated to be of much value in the prevention of dental erosion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.614-618
• /
• 2002

Although there are a lot of file sharing mechanisms in the Internet such as NFS and P2P, FTP is one of the most common mechanisms used until now. In this paper, we propose a more enhanced file sharing mechanism, the Distributed File Server (DFS) method. The most remarkable feature of DFS is that it can be simply adopted in the current Internet FTP services by locating a DFS node between existing FTP servers and clients without changing any existing file transfer environment. To verify the proposed mechanism we implemented a DFS prototype on RedHat 7.2 system and we finally show that it can reduce the file storage problem caused by big-sized multimedia data.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.1
• /
• pp.37-44
• /
• 2018

Solar panels are modules made up of many cells, like the N-type monosilicon, P-type monosilicon, P-type multisilicon, amorphous thin-film silicon, and CIGS solar cells. An efficient photovoltaic (PV) power is important to use to determine what kind of cell types are used because residential solar systems receive attention. In this study, we used 3-type solar panels - such as N-type monosilicon, P-type monosilicon, and CIGS solar cells - to investigate what kind of solar panel on a house or building performs the best. PV systems were composed of 3-type solar panels on the roof with each ~1.8 kW nominal power. N-type monosilicon solar panel resulted in the best power generation when monitored. Capacity Utilization Factor (CUF) and Performance Ratio (PR) of the N-type Si solar panel were 14.6% and 75% respectively. In comparison, N-type monosilicon and CIGS solar panels showed higher performance in power generation than P-type monosilicon solar power with increasing solar irradiance.

• Korean Journal of Materials Research
• /
• v.33 no.10
• /
• pp.430-438
• /
• 2023

In this study, we synthesized pH-controlled resorcinol-formaldehyde (RF) gels through the polymerization of two starting materials: resorcinol and formaldehyde. The prepared RF gels were dried using an acetone substitution method, and they were subsequently carbonized under nitrogen atmosphere to obtain carbon xerogels (CX_Y) prepared at different pH (Y). The carbon xerogels were utilized as active materials for coin-type organic supercapacitor electrodes to investigate the influence of pH on the electrochemical properties of the carbon xerogels. The carbon xerogels prepared at lower pH (CX_9.5 and CX_10) exhibited sufficient particle growth, with a three-dimensional network of particles during the RF gel formation, resulting in the development of abundant mesopores. Conversely, the carbon xerogels prepared at higher pH (CX_11 and CX_12) retained densely packed structures of small particles, leading to pore collapse and low specific surface areas. Consequently, CX_9.5 and CX_10 showed high specific surface areas, and provided ample adsorption sites for the formation of electric double layers with electrolyte ions. Moreover, the three-dimensional particle network in CX_9.5 and CX_10 significantly enhanced electrical conductivity. The presence of well-developed mesopores in these materials further facilitated the effective transport of electrolyte ions, contributing to their superior performance as organic supercapacitor electrodes. This study confirmed that pH-controlled carbon xerogels are one of the promising active materials for organic supercapacitor electrodes. Furthermore, we concluded that pH during RF gel formation is a crucial factor determining the electrode performance of the carbon xerogels, highlighting the need for precise pH control to obtain high-performance carbon xerogel electrodes.

• Korean Journal of Food Science and Technology
• /
• v.14 no.1
• /
• pp.57-62
• /
• 1982

The possibility of developing new kinds of lactic acid beverage from a malt syrup was studied. The optimum sugar concentration of malt syrup for the cultivation of lactic acid bacteria was $10^{\circ}Bx$. The acidity of the fermented malt syrup was improved by the supplement of yeast extract(0.5%) or sodium citrate(0.08%). Though the activity of Lactobacillus lactis in malt syrup was superior to other strains, sensory test indicated that the mixed culture of Lactobacillus lactis and Streptococcus diacetilactis was better because of masking malt flavour. The changes in acidity and viable cells of malt syrup during the lactic fermentation were not so good as skim milk medium, but malt syrup medium containing milk(50 : 50) was nearly similar to skim milk medium. In the sensory scores among samples, no significant differences(P<0.05) were noted between fermented milk and fermented malt syrup containing milk, but fermented malt syrup showed a poor quality. However fermented malt syrup was not inferior to marketing lactic fermented fruit juices with regards to the lactic acid fermented beverage type.

• Journal of the Korean Ceramic Society
• /
• v.36 no.3
• /
• pp.307-318
• /
• 1999

동결건조법에 의한 저유전성 실리카 박막의 제조공정 개발 및 층간 절연물질로의 응용성이 연구되었다. 코팅용 폴리머 실리카 졸은 TEOS와 이소프로판올(iso-propanol:IPA)또는 터트부탄올(tert-butanol:TBA)을 용매로한 2단계 공정에 의하여 제조되었으며, 이들 졸을 p-Si(111)웨이퍼 상에 스핀코팅한 습윤겔 박막을 동결건조 하여 다공성 실리카 박막을 제조하였다. 균일한 박막 코팅층을 얻을 수 있는 실리카 졸의 최적 점도범위는 IPA와 TBA를 용매로 한 실리카 졸의 경우 각각 10~14 cP와 20~30cP 정도였으며 스핀속도는 2000 rpm 이상이었다. 결함이 없는 다공성 실리카 박막은 TBA(빙점 $25^{\circ}C$)를 동결용매로 하여-196$^{\circ}C$까지 급랭시킨 후 $0^{\circ}C$와 0.1 torr 까지 가열 감압한 상태에서 고상의 TBAFMF 모두 제거한 다음 20$0^{\circ}C$까지 열처리하여 제조되었다. 다공성 실리카 박막의 두께는 졸의 타입과 스핀코팅 속도에 의해 2500~15000$\AA$범위 내에서 제어가 가능하였으며 이들 막의 밀도와 유전상 수 값은 각각 0.9$\pm$0.3g/㎤(기공율 60$\pm$10%)과 2.4 정도였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.53-56
• /
• 2009

In this paper, performance evaluation of catalyst for hydrogen peroxide thruster with drying condition is described. Platinum was selected as a catalyst, and alumina of pellet type was chosen as a catalyst support. Evaporation method known as general method for catalyst production was used to make the catalyst. From previous experiments, it is favorable during catalyst making process that solution of active material has low pH level. Therefore, some kinds of low pH level solution had been tested. The drying temperatures are 25, 50, 70, and $90^{\circ}C$. From experimental results, it shows better performance that drying temperature was $90^{\circ}C$ since the catalyst particle could not be crystallized but be evenly spreaded out due to the rapid evaporation of solvent.