• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.3
• /
• pp.302-312
• /
• 2021

The purpose of this study was to develop prototype of virtual reality(VR) simulation with malocclusion models and evaluate its applicability. Task abilities, task completion time, and a satisfaction survey were compared between dentist trainees and dental students. Participants were instructed to observe virtual malocclusion models and then performed three tasks to diagnose the type of malocclusion, determine clinical findings and develop treatment plans. Their satisfaction with the simulation experience were evaluated using a questionnaire containing five questions. Task abilities of trainees related to clinical features and treatment plans were significantly higher than that of students(p < 0.01). In both groups, the task completion time for the second case was significantly reduced compared to that for the first case(p < 0.01). The satisfaction survey showed high scores and positive responses for this simulation in both groups. If the prototype of VR simulation is continuously advanced, it will be applicable for orthodontic education in pediatric dentistry.

• Journal of the Korean Chemical Society
• /
• v.63 no.3
• /
• pp.151-159
• /
• 2019

The TADF properties for carbazol-dicyanobenzene, carbazol-diphenyl sulfone, carbazol-benzonitrile derivatives as OLED candidate materials are theoretically investigated using density functional theory (DFT) with $6-31G^{**}$, cc-pVDZ, and cc-pVTZ basis sets. The optimized geometries, harmonic vibrational frequencies, and HOMO-LUMO energy separations are predicted at the B3LYP/$6-31G^{**}$ level of theory. The harmonic vibrational frequencies of the molecules considered in this study show all real numbers implying true minima. The time dependent density functional theory (TD-DFT) calculations have been also applied to investigate the absorption and emission wavelength (${\lambda}_{max}$), energy differences (${\Delta}E_{ST}$) between excited singlet ($S_1$) and triplet ($T_1$) states of candidate materials.

• Journal of the Korean Chemical Society
• /
• v.60 no.6
• /
• pp.402-409
• /
• 2016

Thin films of lead sulfide colloidal quantum dots (CQDs) of 2.8 nm in diameter are fabricated and their surfaces are passivated by 3-mercaptopropionic acid (MPA) ligand or hybrid type ($MPA+CdCl_2$) ligand, respectively. The changes in valence band electronic structure and atomic composition of each PbS CQD film upon post-treatment such as air, N2 annealing or UV/Ozone have been studied by photoelectron spectroscopy. The air annealing makes the CQD fermi level to move toward the valence band leading to "p-type doping" regardless of ligand type. The UV/Ozone post-treatment generates $Pb(OH)_2$, $PbSO_x$ and PbO on both CQD surfaces. But the amount of the PbO has been reduced in hybrid type ligand case, especially. That is probably because the extra Pb cations in (111) surface are additionally passivated by $Cl_2$ ligand, which limits the reaction between the Pb cation and ozone.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.2
• /
• pp.31-43
• /
• 2014

The Yeongdeok granite emplaced in the eastern Yeongyang subbasin is typically a medium- to coarse-grained massive biotite granite. It intruded into Precambrian schist & gneiss complex and is unconformably overlain by Cretaceous sedimentary rocks. In this study, we attempt to investigate the magma type which formed Yeongdeok granite and estimate the emplacement depth using Al-in-hornblende geobarometer to mineral composition. According to the magma fractionation, $TiO_2$, $Al_2O_3$, $Fe_2O_3{^*}$, FeO, $Fe_2O_3$, MnO, MgO, CaO, $Na_2O$ and $P_2O_5$ show positive trend but $K_2O$ indicate negative trend with $SiO_2$ contents. Those are identified as calc-alkaline series in AFM diagram and show the chemical characteristics of the I-type magma through the oxidation tendency of the iron ion and the portion of the alkaline composition. When calculated using the equation of Hollister et al. (1987), the emplacement depths of the Yeongdeok granite range from 8.98 to 17.19 km and average depth was estimated 13.03 km approximately.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.59-66
• /
• 2016

This paper presents an empirical evaluation on dimensionality reduction strategies by which dissimilarity-based classifications (DBC) can be implemented efficiently. In DBC, classification is not based on feature measurements of individual objects (a set of attributes), but rather on a suitable dissimilarity measure among the individual objects (pair-wise object comparisons). One problem of DBC is the high dimensionality of the dissimilarity space when a lots of objects are treated. To address this issue, two kinds of solutions have been proposed in the literature: prototype selection (PS)-based methods and dimension reduction (DR)-based methods. In this paper, instead of utilizing the PS-based or DR-based methods, a way of performing DBC in Eigen spaces (ES) is considered and empirically compared. In ES-based DBC, classifications are performed as follows: first, a set of principal eigenvectors is extracted from the training data set using a principal component analysis; second, an Eigen space is expanded using a subset of the extracted and selected Eigen vectors; third, after measuring distances among the projected objects in the Eigen space using $l_p$-norms as the dissimilarity, classification is performed. The experimental results, which are obtained using the nearest neighbor rule with artificial and real-life benchmark data sets, demonstrate that when the dimensionality of the Eigen spaces has been selected appropriately, compared to the PS-based and DR-based methods, the performance of the ES-based DBC can be improved in terms of the classification accuracy.

• Journal of Naturopathy
• /
• v.7 no.1
• /
• pp.1-9
• /
• 2018

The purpose of this study is to statistically investigate the changes in mean differences of the vascular age types and index, heart beating, vessel elasticity, diastolic reserves contents measured by the fingertip plethysmogram before and after the subjects (49 people) visit the Gotjawal forest for two hours. While there is no significant change in the mean differences of vascular age types and index, heart beating, diastolic reserves contents in the control group before and after the visit, the differences in the test groups gets higher than the control group and shows a significant difference. Moreover, the variance analyses of the mean values of the contents shows a significant change after the visit. There is no significant change in the values of vessel elasticity changes between the groups after the visit, but the change of values is significant in the within group, and it is not significant between group by variance analysis. The differences of the heart beating was insignificant in the within group, but significant between group after the visit. In conclusion this study proves the effects of forest bathing, because the HRV index significantly improved after the bathing. Therefore the b-c-d-e/a ratio may be useful for evaluation of HRV.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.3
• /
• pp.51-63
• /
• 2021

This study is for the quality improvement of water-sealing & reinforcement grouting in tunnel of the construction of the underground transportation network underneath the city. Existing tunnel grouting process did not technically utilize P~q~t charts fully. It is due to the absence of technical methods to decide how P~q~t charts change in the presence of trouble and what the change represents in grouting. There were no standards to decide which chart pattern represents which ground characteristics, how to categorize ground types, and how to take measures according to the standards. This paper studies on the grouting type, ground characteristics, ground type categorizing method, and countermeasures for both general and algorithm-processed grouting in soil and rock layer to address the aforementioned problems. Newly improved P~q~t charts from grouting in soil was categorized into six different types. Different characteristics and categorization method was developed for each type. Countermeasures for each type of grouting process were developed so that on-site application can be readily available. Improved P~q~t charts for rock layer also have six different types of grouting. Each type was given the countermeasures for rock layer grouting process for easier applications. Therefore, it is expected to be used through out the entire process of grouting from preparation to the last report of the water-sealing & reinforcement grouting in tunnel of the construction of the underground transportation network underneath the city.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.400-409
• /
• 2015

This study examined the plant growth and development characteristics of leafy vegetables on the hydroponic substrates of waste wood chips, radiate pine chips, and mat type of waste wood chips. The bulk density of waste wood chips and radiata pine chips were $0.2g/cm^3$ and $0.16g/cm^3$, respectively. The moisture retention properties of both the radiata pine chips and waste wood chips were found to be similar but not better than those of the control rock wool and coco peat hydroponic substrates. The moisture retention property of the mat type was found to be the lowest. The chemical analysis of waste wood hydroponic substrates (w/v) was as follows.; The pH was 6.59, electric conductivity was 6.76 dS/m, total nitrogen content was 0.5%, C/N ratio was 113%, phosphorus was 10.1 ppm, potassium was 77 ppm, calcium was 531 ppm, magnesium was 49 ppm, and sodium was 96 ppm. The results from the radiata pine chemical analysis showed that it had a pH of 5.29, electric conductivity of 4.49 dS/m, total nitrogen content of 0.32%, C/N ratio of 180%, phosphorus of 6.4 ppm, potassium of 83 ppm, calcium of 97 ppm, magnesium of 29 ppm, and sodium of 59 ppm. Except for the plants grown in mat type, the developmental characteristics of the plants grown in rock wool and coco peat hydroponic substrates were similar. Based on the results of the experiment, waste wood resources may possibly be used as an organic solid medium in place of the existing rock wool and coco peat medium.

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1369-1375
• /
• 2017

The purpose of this study was to investigate the cellular characterization of phospholipase C-${\delta}1$ in olive flounders (Paralichthys olivaceus). In general, phospholipase C signaling pathways are distributed in nuclei at plasma membranes and in cytoplasms, although the pathways' nuclear localization mechanisms are unclear. P. olivaceus duplicates type-A PoPLC-${\delta}1$ (PoPLC-${\delta}1A$), which has a high similarity to the human isoform PLC-${\delta}$; type-B PoPLC-${\delta}1$ (PoPLC-${\delta}1B$ [Sf]), which has a low similarity to the human isoform PLC-${\delta}$ and the alternative splice variant PoPLC-${\delta}1B$ (Lf), which has a nuclear localization signal (NLS) and a nuclear export signal (NES) for nuclear imports and exports, respectively. This study confirmed the effects of the cellular localization and translocation of GFP-tagged PoPLC-${\delta}1A$, PoPLC-${\delta}1B$ (Sf) and PoPLC-${\delta}1B$ (Lf). It administered treatments of $Ca^{2+}$ ionophore ionomycin and endoplasmic reticulum (ER)-$Ca^{2+}$ pump inhibitor thapsigargin to hirame natural-embryo (HINAE) cells. A laser-scanning confocal microscope was used. GFP-tagged PoPLC-${\delta}1A$ was distributed to the cellular organelles, rather than to the cytoplasms and cytomembranes, when PoPLC-${\delta}1B$ (Lf) and PoPLC-${\delta}1B$ (Sf) were localized at the plasma membranes. The treatments of ionomycin and thapsigargin showed the accumulation of PoPLC-${\delta}1A$ in the nuclei when PoPLC-${\delta}1B$ (Lf) nucleocytoplasmic shuttling and PoPLC-${\delta}1B$ (Sf) nucleocytoplasmic shuttling were not observed. The results were the first evidence that PoPLC-${\delta}1A$, which contains functional, intact NES sequences, has a main role in nucleocytoplasmic shuttling and translocation in fish.

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.676-680
• /
• 2010

Most TCOs such as ITO, AZO(Al-doped ZnO), FTO(F-doped $SnO_2$) etc., which have been widely used in LCD, touch panel, solar cell, and organic LEDs etc. as transparent electrode material reveal n-type conductivity. But in order to realize transparent circuit, transparent p-n junction, and introduction of transparent p-type materials are prerequisite. Additional prerequisite condition is optical transparency in visible spectral region. Oxide based materials usually have a wide optical bandgap more than ~3.0 eV. In this study, single-phase transparent semiconductor of $SrCu_2O_2$, which shows p-type conductivity, have been synthesized by 2-step solid state reaction at $950^{\circ}C$ under $N_2$ atmosphere, and single-phase $SrCu_2O_2$ thin films of p-type TCOs have been deposited by RF magnetron sputtering on alkali-free glass substrate from single-phase target at $500^{\circ}C$, 1% $H_2$/(Ar + $H_2$) atmosphere. 3% $H_2$/(Ar + $H_2$) resulted in formation of second phases. Hall measurements confirmed the p-type nature of the fabricated $SrCu_2O_2$ thin films. The electrical conductivity, mobility of carrier and carrier density $5.27{\times}10^{-2}S/cm$, $2.2cm^2$/Vs, $1.53{\times}10^{17}/cm^3$ a room temperature, respectively. Transmittance and optical band-gap of the $SrCu_2O_2$ thin films revealed 62% at 550 nm and 3.28 eV. The electrical and optical properties of the obtained $SrCu_2O_2$ thin films deposited by RF magnetron sputtering were compared with those deposited by PLD and e-beam.