• The Transactions of the Korea Information Processing Society
• /
• v.1 no.1
• /
• pp.105-113
• /
• 1994

This paper introduces the Parallel Advanced Loosely coupled Multiprocessor (PALM) architecture, which is based on HCH(m,p), where m is number of links per a communication processor (CP) and p is the number of application processors (APs) connected to the CP. communication links between a pair of CPs and/or between a CP and an AP, are made of dual-Port RAMs, which provide fast and reliable word-parallel communication between processors. Among the wide spectrum of HCH networks, HCH(m,2) is also known to be a cost optimal topology, such that HCH(m,2) consists of the largest number of APs retaining the minimal number of CPs and communication links. We also implement a testbed based on HCH(2,2). The experiment result shows that the small communication/computation ratio of the PALM system would realize fine-grain parallelism on message-passing MIMD systems.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.567-582
• /
• 2022

Chainsaw use for motor-manual timber harvesting in South Korea is associated with worker safety issues. However, forestry operations such as timber harvesting have already been mechanized to reduce hazards to workers and increase productivity. This study analyzed the productivities and costs of felling and processing, felling and processing using an excavator-based stroke harvester for Pinus rigida and Quercus mongolica stands. To efficiently operate the stroke harvester, we developed a regression equation to estimate the productivities of felling and processing, felling, and processing operations,and we conducted sensitivity analysis of the operation costs using DBH and machine utilization. The felling and processing productivity was 6.53 and 4.02 m³/SMH for P. rigida a nd Q. mongolica, respectively, and the cost was 17,983 and 29,210 won/m³, respectively. The felling productivity for P. rigida a nd Q. mongolica wa s 40.9 and 23.0 m³/SMH, respectively, and the cost was 2,667 and 4,743 won/m³, respectively. The processing productivity for P. rigida and Q. mongolica was 8.25 and 7.75 m³/SMH, respectively, and the cost was 15,296 and 16,283 won/m³, respectively. In the developed regression equation, the DBH, traveling distance, and number of cuttings were found to be important factors (p<0.05). Therefore, it is necessary to construct a DB considering the various conditions and species associated with harvester operations, and further research is needed to increase the accuracy of predicting operation productivity and costs.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.30-37
• /
• 2012

A memory system with the linear skewing scheme has been regarded as one of suitable memory systems for a single instruction, multiple data (SIMD) architecture. The memory system supports simultaneous access n data to m memory modules within various access types with a constant interval in an arbitrary position in two dimensional data array of $M{\times}N$. Although $m{\times}cells$ memory cells are physically required to support logical two dimensional $M{\times}N$ array of data by means of the memory system, at least (m-n)${\times}cells$ memory cells remain in disuse, where cells is (M-1)/q+(N-1)/$p{\times}{\lceil}M/q{\rceil}+1$. On keeping functionalities the memory system supports, $(n{\times}t){\times}N/p$ out of a number of unused memory cells, where t>0, being used as local buffer memories for n processing elements is proposed in this paper.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.2
• /
• pp.51-55
• /
• 2016

The P/M processing of titanium aluminide using amorphous TiAl is developed by which it is possible to overcome inherent fabricability problems and to obtain a fine microstructure. A high quality amorphous TiAl powder produced by reaction ball milling shows clear glass transition far below a temperature at the onset of crystallization in differential scanning calorimetry above a heating rate of 0.05 K/s. We obtained a fully dense compact of amorphous TiAl powders, encapsulated in a vacuumed can, via viscous flow by hot isostatic pressing (HIP). Isothermally annealing of HIP'ed amorphous compact under a pressure of 196 MPa shows a progressive growth of ${\gamma}-TiAl$ phase with ${\alpha}2$ ($Ti_3Al$), which is characterized by increasing sharpness of X-ray peaks with temperature. Fully dense HIP'ed compact of titanium aluminide TiAl shows a high hardness of 505 Hv, suggesting strengthening mechanisms by sub-micron sized grain of ${\gamma}-TiAl$ and particle-dispersion by second phase constituent, ${\alpha}2$.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.1
• /
• pp.52-58
• /
• 1996

This study was carried out 19 investigate the characteristics of pectinesterase (PE), polygalacturonase (PG), lipoxygenase(LOX) and peroxidase (POD) in hot pepper to know the effect of hot pepper on food quality during food processing and storage. The results were as follows : 1. The optimum pH of PE was pH 7.5 and the activity of PE below pH 5.5 was revealed scarcely, The concentration of NaCl and $CaCl_2$ that showed the highest activity of PE were 0.2M and 0.05M, respectively. 2. The optimum pH of PG was pH 6.0 and the activity of PG in acidity was higher than that in alkalinity. The activity of PG was maximum at 0.3M NaCl and 0.2mM $CaCl_2$. Above the concentration of 0.5M NaCl and 0.5M $CaCl_2$, the activity of PG was lower than that of PG not adding these salts 3. The optimum pH of LOX was pH 7.0 and pH 8.5. 4. The optimum pH of POD was pH 6.0 and the activity of POD was higher in weak acidity and neutrality than in alkalinity. POD activity was slightly decreased by the increase of NaCl and $CaCl_2$ concentration.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.1286-1287
• /
• 2012

자원을 효율적으로 관리할 수 있는 분산 처리 분야의 활용도가 높아지고 있는 가운데 P2P 기술의 유용성이 분산 환경에서 입증되고 있다. 이러한 P2P 시스템에서 다양한 컨텐츠를 이용하여 정보 제공의 역할을 하는 서버와 피어들로 구성된 P2P 시스템은 일반적인 자원 보유 서버로 구성된 시스템에 비해 서버의 부하가 적은 것이 사실이다. 본 논문에서는 식당에서 음식 메뉴를 제공함에 있어서 소셜 네트워크 기반의 공동 구매에 있어 개선된 정보와 연계되어 효과적으로 진행되는 P2P 시스템을 제안한다. 소셜 네트워크 기반의 공동 구매 정보는 P2P 시스템을 이용하는 피어에 의해 제공되고, 이러한 중계 정보는 P2P 서버에 의해 제공되는 형태이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.682-685
• /
• 2007

P2P 기술의 발달로 기존 클라이언트-서버 형태인 중앙 집중형 방식의 단점을 극복하고 있다. 이러한 P2P 기술의 진화로 P2P 응용 기술에 대한 많은 발전이 있었다. 현재 P2P 구조에서 사용자는 P2P 네트워크에 참여하여 자신이 원하는 자료를 찾는 검색과정이 필요하다. 본 논문은 이러한 과정을 최소화하여서 검색과정을 줄일 수 있는 방법을 다룬다. P2P 네트워크에 존재하는 서비스 프로파일 목록들을 서비스를 제공하는 주체가 서비스를 소비하는 주체에게 보내주게 된다면 사용자는 최신의 서비스 목록을 유지하여 서비스 목록 검색 시간을 최소화 시킬 수 있다. 본 논문에서는 P2P 오버레이 네트워크상에서의 서비스 푸시 시스템에 대한 정의, 각 피어들의 행동모델을 정의 및 시스템 설계에 대해서 소개한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.777-780
• /
• 2007

인터넷 스트리밍 시스템은 스트리밍 소스를 공급하는 미디어 서버와 이로부터 미디어 스트림을 받아 분배하는 스트리밍 서버, 그리고 스트리밍 단말기들로 구성되며, 기존에는 하나의 스트리밍 서버에 다수의 단말기들이 직접적으로 연결되는 방식을 취하고 있다. 이러한 클라이언트-서버 형태의 중앙 구조의 단점을 극복하여 확장성을 제공하기 위해 P2P 스트리밍 시스템에 대한 연구가 최근 들어 진행되고 있다. 그러나 P2P 방식을 이용한 인터넷 스트리밍 시스템을 설계, 구현, 테스트를하기 위해서 많은 비용이 소비되는 현실적인 어려움이 있다. 그러므로 본 논문에서는 P2P 스트리밍 시스템에 대한 다양한 연구 및 실험을 지원하기 위해, P2P 스트리밍 시스템을 정의하고, NS2 시뮬레이션 라이브러리를 이용하여 P2P 스트리밍 시스템 시뮬레이터 P2PStreamSim을 설계 및 구현하였다. 또한 테스트 P2P 스트리밍 시스템을 사례로 적용하여 P2PStreamSim의 동작을 검증하고 성능을 평가하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1878-1888
• /
• 1990

In this paper, the input-output interconnection method of the multi-valued signal processing circuit using perfect Shuffle technique and Kronecker product is discussed. Using this method, the design method of circuit of the multi-valued Reed-Muller expansions(MRME) to be used the multi-valued signal processing on finite field GF(p**m) is presented. The proposed input-output interconnection method is shown that the matrix transform is efficient and that the module structure is easy. The circuit design of MRME on FG(p**m) is realized following as` 1) contructing the baisc gates on GF(3) by CMOS T gate, 2) designing the basic cells to be implemented the transform and inverse transform matrix of MRME using these basic gates, 3) interconnecting these cells by the input-output interconnecting method of the multivalued signal processing circuits. Also, the circuit design of the multi-valued signal processing function on GF(3\ulcorner similar to Winograd algorithm of 3x3 array of DFT (discrete fourier transform) is realized by interconnection of Perfect Shuffle technique and Kronecker product. The presented multi-valued signal processing circuits that are simple and regular for wire routing and posses the properties of concurrency and modularity are suitable for VLSI.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.303-304
• /
• 2006

The mechanical properties of ferrous powder metallurgy (P/M) materials are directly related to their microstructure. Ferrous P/M materials with sufficient hardenability will develop microstructures containing significant percentages of martensite in the as-sintered condition. Recently, sinter-hardening has developed into a highly cost effective production method through hardened P/M parts without the need for additional heat-treatments. This paper reviews the advances of sinter-hardening as well as some key processing parameters such as sintering temperature, cooling rate, tempering required to produce high quality sinter-hardened components. Specific topics including effect of alloying elements, alloying methods, and the Characterization and observation of microstructure are discussed.