• 전력전자학회논문지
• /
• 제6권2호
• /
• pp.164-172
• /
• 2001

본 논문에서는 대표적인 MPPT(Maximum Power Point Tracking)제어 알고리즘인 일정전압제어, P&O(Perturbation and Observation)제어, IncCond(Incremental Conductance)제어에 대하여 서술하고, 그 효율성을 검토해 보았다. 이를 위하여 시뮬레이션 및 효율시험을 통하여 정상상태 및 과도상태에 대한 각 알고리즘별 특성 및 효율을 분석하였다. 또한, MPPT 제어의 고효율화를 위하여 기존의 제어 알고리즘을 개선한 Two-Mode 제어법을 제안하였으며, MPPT 효율측정을 위한 회로구성 및 측정 방법을 제시하였다.

• 전기학회논문지P
• /
• 제67권4호
• /
• pp.233-237
• /
• 2018

In this paper, we compared power generation characteristics of two MPPT algorithms, P & O and InC, applied to grid-connected solar inverters. The MPPT detects the voltage and current of the solar module string and transfers the power to the DC link. Since the grid is connected by the power conversion circuit, the grid connection control and the MPPT control influence each other. The power generation characteristics were analyzed by Psim simulation according to the MPPT cycle in the weak grid conditions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.469-470
• /
• 2016

Since efficiency of maximum power point tracking (MPPT) is important for photovoltaic systems, a number of MPPT algorithms have already been researched for other environment, however, the most of MPPT algorithms can't track maximum point in dynamic irradiation. In this paper, P&O and 3-Point MPPT which is more specialized in dynamic irradiation are compared in basis of European Efficiency Test(EN50530). The efficiency of 3-Point MPPT algorithm is proved by simulation and experiment. In result, 3-Point MPPT shows higher efficiency in dynamic irradiation and less affected by environment than P&O.

• 전력전자학회논문지
• /
• 제25권1호
• /
• pp.1-5
• /
• 2020

Solar power generation systems require maximum power point tracking (MPPT) control to operate PV panels at their maximum power point (MPP). Most conventional MPPT algorithms are based on the slope-tracking concept. A typical slope-tracking method is the perturb and observe (P&O) algorithm. The P&O algorithm measures the current and voltage of a PV panel to find the operating point of the voltage at which the calculated power is maximized. However, the measurement error of the sensor causes irregularity in the calculation of the generated power and voltage control. This irregularity leads to the problem of not finding the correct MPP operating point. In this work, the power output of a PV panel based on the P&O algorithm is simulated by considering the insolation profiles from typical clear and cloudy weather conditions and the errors of current and voltage sensors. Simulation analysis suggests the optimal control period and perturbation voltage of MPPT to maximize its target efficiency under real weather conditions with sensor tolerance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.123-125
• /
• 2018

태양광발전시스템은 낮은 효율의 PV 패널을 사용하여 최대의 전력을 생산하기 위해 PV 패널의 최대전력점에서 운전하는 MPPT(Maximum Power Point Tracking) 제어가 반드시 필요하다. 기존의 MPPT 알고리즘은 대부분 경사법에 기초하고 있으며 그 중 대표적인 방법이 P&O(Perturb and Observe) 알고리즘이다. P&O 알고리즘의 MPPT 성능을 좌우하는 두 가지 인수는 MPPT 제어주기와 변량전압의 크기이다. MPPT 제어기의 빠른 동특성과 극대화된 효율을 위한 최적의 MPPT 제어주기와 변량전압의 크기를 결정하기 위해서는 실제 날씨 환경에서 다양한 일사량 프로파일 패턴에 대한 MPPT 제어기의 성능분석이 필수적이다. 본 논문에서는 대한민국 중부지역의 전형적인 맑은 날씨와 흐린 날씨에서 실제 일사량을 측정하고, 취득한 일사량데이터를 기초로 저자가 개발한 다이오드 등가모델을 적용하여 시뮬레이션을 수행하였다. 이를 기반으로 MPPT 제어주기의 설정값에 따른 PV 패널의 전력생산량을 예측하여 MPPT 목표 효율을 극대화할 수 있는 최적의 MPPT 제어주기를 제시한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.234-237
• /
• 2003

As the maximum power operating point (MPOP) of photovoltaic (PV) power systems changes with changing atmospheric conditions, the efficiency of maximum power point tracking (MPPT) is important in PV power systems. Many MPPT techniques have been considered in the past, but techniques using microprocessors with appropriate MPPT algorithms are favored because of their flexibility and compatibility with different PV arrays. Although the efficiency of these MPPT algorithms is usually high, it drops noticeably in case of rapidly changing atmospheric conditions. In this paper, we proposed a new MPPT control method called improved perturb and observe method (ImP&O), anda simple voltage and current characteristic equation of a PV array for PV array simulator. Experimental results verify the accuracy and excellent performance of the proposed MPPT method. ImP&O algorithm is very simple, and has successful tracked the MPOP, even in case of rapidly changing atmospheric conditions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.117-120
• /
• 2004

As the maximum power operating point (MPOP) of photovoltaic (PV) power generation systems changes with varying atmospheric conditions such as solar radiation and temperature, an important consideration in the design of efficient PV system is to track the MPOP correctly. Although the efficiency of these Maximum Power Point Tracking algorithms is usually high, it drops noticeably in case of rapidly changing atmospheric conditions. This paper describes common MPPT control algorithm: Constant Voltage Control, Perturbation and Observation(P&O), Incremental Conductance (IncCnd) and proposes a new MPPT algorithm based on P&O algorithm. The conception and control principles of the proposed MPPT method are explained in detail and its validity of the proposed method is verified through several simulated results. As it doesn't use digital signal processor, this MPPT method has the merits of both a cost efficiency and a simple control circuit design. Therefore, it is considered that the proposed MPPT method is proper to low power, low cost PV applications.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권1호
• /
• pp.8-13
• /
• 2012

We already fabricated a proto-type HTS charging system with photovoltaic (PV) system and obtained design parameters for DC converter and HTS charging system. In order to develop the real scale charging system efficiently, we suggested a maximum power point tracking (MPPT) controller using a perturb and observe (P&O) MPPT algorithm for PV system. In this paper, we designed and simulated the MPPT controller for the real scale HTS charging system. As well as, the PV module has been analyzed by solving solar cell equivalent equations. The simulated and theoretical results presented here are being considered the next study which addresses the design and fabrication parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1359-1361
• /
• 2003

As the maximum power operating point(MPOP) of Photovoltaic(PV) power generation systems changes with changing atmospheric conditions such as solar radiation and temperature, an important consideration. In the design of efficient PV system is to track the MPOP correctly. Many maximum power point tracking(MPPT) techniques have been considered in the past, however, techniques using microprocessors with appropriate MPPT algorithms are favored because of their flexibility and compatibility with different PV arrays. Although the efficiency of these MPPT algorithms is usually high, it drops noticeably in case of rapidly changing atmospheric conditions. This pager proposed a new MPPT algorithm based on perturb & observe(P&O) algorithm with experiment. The results shows that the new P&O algorithm has successfully tracked the MPOP, even in case of rapidly changing atmospheric conditions, and has higher efficiency than ordinary algorithms.

• 전력전자학회논문지
• /
• 제25권1호
• /
• pp.29-36
• /
• 2020

In this study, a variable step algorithm is proposed on the basis of the perturb and observe method. The proposed algorithm can follow the maximum power point (MPP) quickly when solar irradiance changes rapidly. The proposed technique uses the voltage change characteristic at the MPP when the environment changes because of insolation or temperature. The MPP is tracked through the voltage control using a variable step method. This method determines the sudden change of solar irradiance by setting the threshold value and operates in fast tracking mode to track the MPP rapidly. When the operation point reaches the MPP, the mode switches to the variable step mode to minimize the steady state error. In addition, the output disturbance is decreased through the optimization of the control method design. The performance of the proposed MPPT algorithm is verified through simulation and experiment.